FTS-based face milling of micro structures

Show simple item record

dc.identifier.uri http://dx.doi.org/10.15488/828
dc.identifier.uri http://www.repo.uni-hannover.de/handle/123456789/852
dc.contributor.author Köhler, Jens
dc.contributor.author Seibel, A.
dc.date.accessioned 2016-12-16T07:23:12Z
dc.date.available 2016-12-16T07:23:12Z
dc.date.issued 2015
dc.identifier.citation Köhler, J.; Seibel, A.: FTS-based face milling of micro structures. In: Procedia CIRP 28 (2015), S. 58-63. DOI: https://doi.org/10.1016/j.procir.2015.04.011
dc.description.abstract This article presents a technical concept and machining possibilities for milling of micro structures with a fast tool servo (FTS). The tool is capable of tool tip displacements with a variable frequency up to 4000 Hz and an amplitude up to 30 μm. The control system of the actuator is linked to the angular spindle position, allowing to freely manipulate the excitation signal. Combining this tool system with a single tooth face milling head, micro structures on flat surfaces can be generated on conventional milling centers. Selected micro structures are machined and evaluated in terms of precision and surface quality. eng
dc.description.sponsorship DFG/CRC/653
dc.language.iso eng
dc.publisher Amsterdam : Elsevier
dc.relation.ispartofseries Procedia CIRP 28 (2015)
dc.rights CC BY-NC-ND 4.0 Unported
dc.rights.uri https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject Face milling eng
dc.subject Fast tool servo eng
dc.subject FTS eng
dc.subject Gentelligent eng
dc.subject Micro machining eng
dc.subject Micro structures eng
dc.subject Milling eng
dc.subject Engineering research eng
dc.subject Micromachining eng
dc.subject Production eng
dc.subject Quality control eng
dc.subject Social networking (online) eng
dc.subject World Wide Web eng
dc.subject Conventional millings eng
dc.subject Excitation signals eng
dc.subject Face milling eng
dc.subject Fast tool servo eng
dc.subject FTS eng
dc.subject Gentelligent eng
dc.subject Spindle position eng
dc.subject Variable frequencies eng
dc.subject Milling (machining) eng
dc.subject.classification Konferenzschrift ger
dc.subject.ddc 620 | Ingenieurwissenschaften und Maschinenbau ger
dc.title FTS-based face milling of micro structures
dc.type Article
dc.type Text
dc.relation.issn 22128271
dc.relation.doi https://doi.org/10.1016/j.procir.2015.04.011
dc.bibliographicCitation.volume 28
dc.bibliographicCitation.firstPage 58
dc.bibliographicCitation.lastPage 63
dc.description.version publishedVersion
tib.accessRights frei zug�nglich

Files in this item

This item appears in the following Collection(s):

Show simple item record


Search the repository


My Account

Usage Statistics