Auflistung Fakultät für Maschinenbau nach Publikationstyp

Auflistung Fakultät für Maschinenbau nach Publikationstyp

Sortiert nach: Sortierung: Ergebnisse:

  • 3D geometry measurement of hot cylindric specimen using structured light 
    Quentin, Lorenz; Beermann, Rüdiger; Pösch, Andreas; Reithmeier, Eduard; Kästner, Markus (Bellingham, Wash. : SPIE, 2017)
    We present a fringe projection system to measure glowing hot hybrid components in between production processes. For this a high power green light projector, based on TI DLP technology, is used to create the highest possible ...
  • 3D registration of depth data of porous surface coatings based on 3D phase correlation and the trimmed ICP algorithm 
    Loftfield, Nina; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2017)
    A critical factor of endoprostheses is the quality of the tribological pairing. The objective of this research project is to manufacture stochastically porous aluminum oxide surface coatings with high wear resistance and ...
  • Actuation and stiffening in fluid-driven soft robots using low-melting-point material 
    Peters, Jan; Nolan, Erin; Wiese, Mats; Miodownik, Mark; Spurgeon, Sarah; Arezzo, Alberto; Raatz, Annika; Wurdemann, Helge A. (Piscataway, NJ : IEEE, 2019)
    Soft material robots offer a number of advantages over traditional rigid robots in applications including human-robot interaction, rehabilitation and surgery. These robots can navigate around obstacles, elongate, squeeze ...
  • Adjusting Mechanical Properties of Forging Dies Produced by Ausforming 
    Behrens, Bernd-Arno; Brunotte, Kai; Petersen, Tom; Ostermeyer, Corvin; Till, Michael (Liège : ULiège Library, 2021)
    Due to high thermo-mechanical loads, tools used in hot forming operations need a high resistance to different damage phenomena, such as deformation, cracking and abrasion. They are exposed to cyclic thermo-mechanical stress ...
  • Aerodynamic damping of composite UHBR fans under the consideration of acoustic intake reflections 
    Gößling, Jan; Seume, Joerg R.; Flüh, Jan Peter; Paletta, Nicola; Eggers, Torben; Friedrichs, Jens; Natale, Nunzio (New York, N.Y. : The American Society of Mechanical Engineers, 2022)
    Steadily rising regulations and demands on aeroengines require the continuous reduction of CO2 emissions. Among other factors, particularly the weight reduction of the engine as well as synergetic engine-airframe integration ...
  • Agent collaboration in a multi-agent-system for analysis and optimization of mechanical engineering parts 
    Gembarski, Paul Christoph (Amsterdam [u.a.] : Elsevier, 2020)
    In mechanical engineering, designers have to review a designed artefact iteratively with different domain experts, e.g. from manufacturing, to avoid later changes and find a robust, optimized design. To support the designer, ...
  • Aktiver Scheinwerfer mit DMD-Technologie zur Erzeugung vollständiger Lichtverteilungen 
    Knöchelmann, Marvin; Wolf, Alexander; Kloppenburg, Gerolf; Lachmayer, Roland (Düsseldorf : VDI Verlag GmbH, 2018-06-05)
    In diesem Beitrag wird der Prototyp eines aktiven Scheinwerfers vorgestellt, der durch den Einsatz eines Mikrospiegelarrays (DMD) hochaufgelöste Lichtverteilungen generieren kann. Mit der eingesetzten verzeichnenden ...
  • Alignment Process for Glass Substrates Using Electrostatic Self-Assembly 
    Stucki, Martin; Schumann, Christoph; Raatz, Annika (Berlin : Springer Nature, 2021)
    Sequential precision placing and bonding of components is time-consuming and expensive. Electrostatic self-assembly is a process for the parallel alignment of flat parts. Fluid between the parts acts as bearing and dielectric ...
  • Analysis of LED arrangement in an array with respect to lens geometry 
    Ley, Peer-Phillip; Held, Marcel Philipp; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2018)
    Highly adaptive light sources such as LED arrays have been surpassing conventional light sources (halogen, xenon) for automotive applications. Individual LED arrangements within the array, high durability and low energy ...
  • Application of Decentralized and Self-Regulating Knowledge Bases for Assembly Design Automation 
    Plappert, Stefan; Becker, Christian; Gembarski, Paul Christoph; Lachmayer, Roland (Novi Sad : University of Novi Sad - Faculty of Technical Sciences, 2022)
    During product development, changes to parts that are already built into assemblies usually lead to the need to check the function and consistency of the assembly. This procedure is very time-consuming and has to be performed ...
  • Assembly of Micro Systems with the High Precision Robot Parvus 
    Burisch, Arne; Degen, Reinhard; Hesselbach, Jürgen; Raatz, Annika (Berlin [u.a.] : VDE-Verlag, 2007)
    In recent years, the development of micro systems has been widely discussed in research articles concerning a decrease in size, an increase of complexity and the variety of materials used. In contrast, manufacturing and ...
  • Automated Assembly of Hybrid Microsystems 
    Schöttler, Kerstin; Rathmann, Sven; Raatz, Annika; Hesselbach, Jürgen (Bedford : Euspen (European Society for Precision Engineering and Nanotechnology), 2007)
    The paper describes the design of a system for the automated assembly of hybrid microsystems and the accuracies of the components. The influences on the accuracy will be analyzed on the basis of an example for an automated ...
  • Automated method for structural segmentation of nasal airways based on cone beam computed tomography 
    Tymkovych, Maksym Yu; Avrunin, Oleg G.; Paliy, Victor G.; Filzow, Maksim; Gryshkov, Oleksandr; Glasmacher, Birgit; Omiotek, Zbigniew; Dzierlak, Roza; Smailova, Saule; Kozbekova, Ainur (Bellingham, Wash. : SPIE, 2017)
    The work is dedicated to the segmentation problem of human nasal airways using Cone Beam Computed Tomography. During research, we propose a specialized approach of structured segmentation of nasal airways. That approach ...
  • Automatisierung der flexiblen Handhabung schmiedewarmer Tailored Forming Bauteile 
    Ince, Caner-Veli; Raatz, Annika (Darmstadt : VDI, 2022)
    Universalgreifer sind flexibel einsetzbar und können sich an verschiedene Situationen und Objekte anpassen. Aktuelle formvariable Universalgreifer bestehen überwiegend aus monolithischen polymeren Werkstoffen, deren ...
  • Autonomous Sensing and Localization of a Mobile Robot for Multi-Step Additive Manufacturing in Construction 
    Lachmayer, L.; Recker, T.; Dielemans, G.; Dörfler, K.; Raatz, A. (Katlenburg-Lindau : Copernicus Publications, 2022)
    In contrast to stationary systems, mobile robots have an arbitrarily expandable workspace. As a result, the spatial dimensioning of the task to be mastered plays only a subordinate role and can be scaled as desired. For ...
  • Backlash Identification in Industrial Positioning Systems Aided by a Mobile Accelerometer Board with Wi-Fi 
    Tantau, Mathias; Perner, Lars; Wielitzka, Mark; Ortmaier, Tobias (Prague : SciTePress, 2020)
    In electromechanical motion systems performance measures such as positioning accuracy, dynamic stiffness and control bandwidth are severely limited by backlash. Several control schemes based on backlash compensation or ...
  • Eine batchfähige Verbindungstechnik auf Basis von Schmelzklebstoffen 
    Hemken, Gregor; Böhm, Stefan; Dilger, Klaus; Raatz, Annika; Rathmann, Sven (Berlin [u.a.] : VDE-Verlag, 2008)
    Die hier vorgestellten Arbeiten des Teilprojekts B8 aus dem SFB 516 „Konstruktion und Fertigung aktiver Mikrosysteme“ befassen sich mit der Montage aktiver Mikrosysteme. Dabei werden sensorgeführte Montageprozes se sowie ...
  • Behavior-Tree-Based Person Search for Symbiotic Autonomous Mobile Robot Tasks 
    Stuede, Marvin; Lerche, Timo; Petersen, Martin Alexander; Spindeldreier, Svenja (Piscataway, NJ : IEEE, 2021-10-08)
    We consider the problem of people search by a mobile social robot in case of a situation that cannot be solved by the robot alone. Examples are physically opening a closed door or operating an elevator. Based on the Behavior ...
  • Calculation comparison of an additive and subtractive light modulator for high-resolution pixellight headlamps 
    Held, Marcel Philipp; Ley, Peer-Phillip; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2018)
    High-resolution vehicle headlamps represent a future-oriented technology that increases traffic safety and driving comfort in the dark. A further development to current matrix beam headlamps are LED-based pixellight systems ...
  • Challenges in the development of the Laser Metal Deposition process for use in microgravity at the Einstein-Elevator 
    Raupert, Marvin; Tahtali, Emre; Sperling, Richard; Heidt, Alexander; Lotz, Christoph; Overmeyer, Ludger ([Hannover] : Wissenschaftliche Gesellschaft Lasertechnik und Photonik e.V. (WLT), 2023-09-28)
    This paper is about the challenges in developing the Laser Metal Deposition process with metal powder for use in microgravity. The modified gravitational conditions are set up for a few seconds using a drop tower, the ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken