Auflistung Fakultät für Maschinenbau nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Augmenting Milling Process Data for Shape Error Prediction 
    Denkena, Berend; Dittrich, Marc-André; Uhlich, Florian (Amsterdam : Elsevier B.V., 2016)
    New integrated sensors and connected machine tools generate a tremendous amount of in-depth process data. The continuous transformation of the obtained data into deployable machining knowledge allows for faster ramp-ups, ...
  • Ausgewählte statistische Betrachtungen im Flugzeugentwurf: Superkritische Profile und Fahrwerk 
    Gulla, Duncan (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Kenntnisse über Parametereigenschaften und Charakteristiken von Flugzeugkomponenten sind eine wesentliche Grundlage für Methoden des Flugzeugentwurfs. Daher ist Ziel dieser Arbeit, statistische Merkmale und Kenngrößen einer ...
  • Auslegung partikelgedämpfter Strukturbauteile für die Additive Fertigung 
    Ehlers, Tobias (Hannover : Institutionelles Repositorium der Gottfried Wilhelm Leibniz Universität, 2023)
    Das kontinuierliche Streben, Strukturbauteile immer ressourcenschonender und effizienter zu gestalten, führt zu einer Reduktion der Bauteilmasse, aber auch der Dämpfung. Allerdings stellen Dämpfungsmechanismen einen ...
  • Auslegung von Reibelementen zur Schwingungsdämpfung von Turbinenschaufeln 
    Panning, Lars (Hannover : Universität, 2005)
    [no abstract]
  • Ausmischverluste und instationärer Arbeitsumsatz in Turbinen 
    Biester, Marc Heinz-Otto (Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2016)
    [no abstract]
  • Auto-tuning of PID Controllers for Robotic Manipulators Using PSO and MOPSO 
    Zidan, Ahmed; Tappe, Svenja; Ortmaier, Tobias (Cham : Springer, 2019)
    This work proposes two approaches to automatic tuning of PID position controllers based on different global optimization strategies. The chosen optimization algorithms are PSO and MOPSO, i. e. the problem is handled as a ...
  • Automated Assembly of Hybrid Microsystems 
    Schöttler, Kerstin; Rathmann, Sven; Raatz, Annika; Hesselbach, Jürgen (Bedford : Euspen (European Society for Precision Engineering and Nanotechnology), 2007)
    The paper describes the design of a system for the automated assembly of hybrid microsystems and the accuracies of the components. The influences on the accuracy will be analyzed on the basis of an example for an automated ...
  • Automated control of the laser welding process of heart valve scaffolds 
    Weber, Moritz; Hoheisel, Anna L.; Glasmacher, Birgit (Berlin, Boston : De Gruyter, 2016)
    Using the electrospinning process the geometry of a heart valve is not replicable by just one manufacturing process. To produce heart valve scaffolds the heart valve leaflets and the vessel have to be produced in separated ...
  • Automated design of multi-stage forging sequences for die forging 
    Hedicke-Claus, Yorck; Kriwall, Mareile; Stonis, Malte; Behrens, Bernd-Arno (Berlin ; Heidelberg : Springer, 2023)
    Forgings are produced in several process steps, the so-called forging sequence. The design of efficient forging sequences is a very complex and iterative development process. In order to automate this process and to reduce ...
  • Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures 
    Denkena, Berend; Schmidt, Carsten; Weber, Patricc (Amsterdam [u.a.] : Elsevier, 2016)
    In the research project “High-performance Production of CFRP Structures” (HP CFK) a new automated fiber placement (AFP) system for laying thermoset CFRP (carbon fiber-reinforced plastic) slit tapes was developed. Its novel, ...
  • Automated fiber placement: The impact of manufacturing constraints on achieving structural property targets for CFRP-stiffeners 
    Denkena, Berend; Horst, Peter; Heimbs, Sebastian; Schmidt, Carsten; Reichert, Lisa; Tiemann, Tim (Amsterdam [u.a.] : Elsevier, 2023)
    The use of automated fiber placement (AFP) to manufacture integrated CFRP stiffening structures leads to a conflict between structural requirements and process limitations in early design stages. In order to avoid costly ...
  • Automated geometry measurement and deep rolling of butt welds 
    Heide, Klaas Maximilian; Heikebrügge, Steffen; Dänekas, Christian; Breidenstein, Bernd; Schaumann, Peter (Heidelberg : Springer, 2022)
    During the joining of two metal sheets by welding, a process-specific geometry of the weld is created. The local geometry of the created weld has a decisive influence on its fatigue strength. This is due to stress concentration ...
  • Automated method for structural segmentation of nasal airways based on cone beam computed tomography 
    Tymkovych, Maksym Yu; Avrunin, Oleg G.; Paliy, Victor G.; Filzow, Maksim; Gryshkov, Oleksandr; Glasmacher, Birgit; Omiotek, Zbigniew; Dzierlak, Roza; Smailova, Saule; Kozbekova, Ainur (Bellingham, Wash. : SPIE, 2017)
    The work is dedicated to the segmentation problem of human nasal airways using Cone Beam Computed Tomography. During research, we propose a specialized approach of structured segmentation of nasal airways. That approach ...
  • Automated process planning in milling of hybrid components 
    Denkena, Berend; Wichmann, Marcel; Heide, Klaas Maximilian; Wiesener, Frederik; Nguyen, Hai Nam (Berlin, Heidelberg : Springer, 2023)
    Hybrid material composites can meet the increasing demands for high strength and low weight due to their different workpiece properties. Usually, hybrid components require post-machining after their fabrication. Due to the ...
  • Automated production data feedback for adaptive work planning and production control 
    Denkena, Berend; Dittrich, Marc-André; Wilmsmeier, Sören (Amsterdam : Elsevier B.V., 2019)
    Higher customer's expectations and new technological developments have resulted in an increased complexity of manufacturing systems. Consequently, work planning and production control have become more crucial than ever to ...
  • Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries 
    Behrens, Bernd-Arno; Raatz, Annika; Hübner, Sven; Bonk, Christian; Bohne, Florian; Bruns, Christian; Micke-Camuz, Moritz (Amsterdam : Elsevier, 2017)
    This research describes the development of a fully automated forming process of continuous FRP to assemble a down scaled battery tray for a plug-in-hybrid automobile. The paper presents the results of forming experiments ...
  • Automatic generation of task-specific serial mechanisms using combined structural and dimensional synthesis 
    Ramirez Rodriguez, Daniel Andres (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2018)
    Although the diversity of robot kinematic structures that are used in industry has increased in the recent years, robot manufacturers still offer only a limited number of architectures. As most of the robots, especially ...
  • Automatic re-contouring of repair-welded tool moulds 
    Denkena, Berend; Dittrich, Marc-Andre; Heide, Klaas Maximilian (Amsterdam [u.a.] : Elsevier, 2019)
    The process of repairing damaged tool moulds is conducted manually in the industry. This results in long process times as well as a high dependence of the repair result on the experience of the worker. After a visual ...
  • Automatic Regeneration of Cemented Carbide Tools for a Resource Efficient Tool Production 
    Denkena, Berend; Dittrich, Marc-André; Liu, Yanwei; Theuer, Mirko (Amsterdam : Elsevier B.V., 2018)
    Cemented carbide tools have become widely established in machining of metallic materials in recent decades. However, due to rising prices of cemented carbide and an imminent scarcity of resources, there is a growing need ...
  • Automation concepts and gripping solutions for bonding with reactive multilayer systems 
    Heyn, J.; Blumenthal, P.; Hemken, G.; Fiedler, S.; Walz, C.; Raatz, Annika; Dröder, Klaus (Amsterdam : Elsevier, 2014)
    Reactive multilayer systems (RMS) represent an innovative heat source for the establishment of solder joints. They offer fast bonding processes that introduce very little thermal input and internal stress on the bonded ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken