- Startseite
- →
- Weitere Einrichtungen
- →
- An-Institute
- →
- Dokumentanzeige
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.identifier.uri | http://dx.doi.org/10.15488/4470 | |
| dc.identifier.uri | https://www.repo.uni-hannover.de/handle/123456789/4510 | |
| dc.contributor.author | Haschke, Jan
|
|
| dc.contributor.author | Chen, Yi-Yang
|
|
| dc.contributor.author | Gogolin, Ralf
|
|
| dc.contributor.author | Mews, Mathias
|
|
| dc.contributor.author | Mingirulli, Nicola
|
|
| dc.contributor.author | Korte, Lars
|
|
| dc.contributor.author | Rech, Bernd
|
|
| dc.date.accessioned | 2019-03-06T09:34:00Z | |
| dc.date.available | 2019-03-06T09:34:00Z | |
| dc.date.issued | 2013 | |
| dc.identifier.citation | Haschke, J.; Chen, Y.-Y.; Gogolin, R.; Mews, M.; Mingirulli, N. et al.: Approach for a simplified fabrication process for IBC-SHJ solar cells with high fill factors. In: Energy Procedia 38 (2013), S. 732-736. DOI: https://doi.org/10.1016/j.egypro.2013.07.340 | |
| dc.description.abstract | In this paper, interdigitated back contacted silicon heterojunction (IBC-SHJ) solar cell results as well as two dimensional device simulations are presented. The simulation indicates that for the minority contact (emitter) the coverage of the metallisation should be nearly 100%, while this is less critical for the majority contact (BSF). We present experimental results for an IBC-SHJ solar cell with a metallisation fraction of 100% for the emitter and approximately 65% for the BSF, with a high fill factor of 77.7% and an independently confirmed energy conversion efficiency of 19.4%. | eng |
| dc.language.iso | eng | |
| dc.publisher | London : Elsevier Ltd. | |
| dc.relation.ispartofseries | Energy Procedia 38 (2013) | |
| dc.rights | CC BY-NC-ND 3.0 Unported | |
| dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/3.0/ | |
| dc.subject | Back contacted | eng |
| dc.subject | Contact separation | eng |
| dc.subject | Silicon heterojunction | eng |
| dc.subject | Simulation | eng |
| dc.subject.classification | Konferenzschrift | ger |
| dc.subject.ddc |
620 | Ingenieurwissenschaften und Maschinenbau
|
ger |
| dc.title | Approach for a simplified fabrication process for IBC-SHJ solar cells with high fill factors | |
| dc.type | Article | |
| dc.type | Text | |
| dc.relation.issn | 1876-6102 | |
| dc.relation.doi | https://doi.org/10.1016/j.egypro.2013.07.340 | |
| dc.bibliographicCitation.volume | 38 | |
| dc.bibliographicCitation.firstPage | 732 | |
| dc.bibliographicCitation.lastPage | 736 | |
| dc.description.version | publishedVersion | |
| tib.accessRights | frei zug�nglich |
Die Publikation erscheint in Sammlung(en):
-
An-Institute
Frei zugängliche Publikationen aus An-Instituten der Leibniz Universität Hannover