Auflistung An-Institute nach Schlagwörtern (GND)

Sortiert nach: Sortierung: Ergebnisse:

  • Kasewieter, Jörg; Haase, Felix; Larrodé, Marta Haro; Köntges, Marc (London : Elsevier Ltd., 2014)
    We investigate the mechanisms leading to electrically insulated cell parts in a photovoltaic module under mechanical load. For this we measure the resistances across a crack in a laminated solar cell during bending that ...
  • Kajari-Schröder, Sarah; Kunze, Iris; Köntges, Marc (London : Elsevier Ltd., 2012)
    The evaluation of cracks in PV modules is a difficult task: cracks do not necessarily lead to a strong degradation in the power output of the module directly after the crack initiation. However, PV modules with cracks ...
  • Gong, Xuefei; Lau, Yun-Kau; Xu, Shengnian; Amaro-Seoane, Pau; Bai, Shan; Bian, Xing; Cao, Zhoujian; Chen, Gerui; Chen, Xian; Ding, Yanwei; Dong, Peng; Gao, Wei; Heinzel, Gerhard; Li, Ming; Li, Shuo; Liu, Fukun; Luo, Ziren; Shao, Mingxue; Spurzem, Rainer; Sun, Baosan; Tang, Wenlin; Wang, Yan; Xu, Peng; Yu, Pin; Yuan, Yefei; Zhang, Xiaomin; Zhou, Zebing (Bristol : Institute of Physics Publishing, 2015)
    The present work reports on a feasibility study commissioned by the Chinese Academy of Sciences of China to explore various possible mission options to detect gravitational waves in space alternative to that of the eLISA/LISA ...
  • Wahl, Jan Philipp; Niedermeyer, Jens; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    Additive manufacturing enables the production of intricate geometries including internal structures. This design freedom can be used advantageously to enhance heat transfer in injection molds by means of conformal cooling. ...
  • Terekhov, P.D.; Baryshnikova, K.V.; Evlyukhin, A.B.; Shalin, A.S. (Bristol : IOP Publishing Ltd., 2017)
    We demonstrate numerically the possibility of multipole interference in the TiO2 (titanium dioxide) microcylinders and microfrustums in the wavelength range 210-300 μm. Resonantly strong destructive interference between ...
  • Bluemel, S.; Staehr, R.; Jaeschke, P.; Stute, U. (Amsterdam : Elsevier B.V., 2013)
    Laser cutting of carbon fiber reinforced plastics as a thermal process results in a thermal load on the material. Due to the high thermal conductivity of carbon fibers, residual heat is conducted along the fibers, away ...
  • Emminghaus, Nicole; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    The PBF-LB (laser-based powder bed fusion) process is subject to a large number of variables, including the characteristics of the processed powder. Since a powder with a given specification can be supplied by various ...
  • Kranz, Christopher; Lim, Bianca; Baumann, Ulrike; Dullweber, Thorsten (London : Elsevier Ltd., 2015)
    Next-generation industrial PERC solar cells typically include local laser contact opening (LCO) of a dielectric passivation layer stack at the rear side and subsequent full-area aluminum screen printing and firing. In this ...
  • Giovannetti, Federico; Kirchner, Maik; Kliem, Francis; Hoeltje, Torben (London : Elsevier Ltd., 2014)
    Insulated glass solar thermal collectors result from the insertion of a solar absorber into the outer gap of a multiple glazed unit. Taking advantages from the manufacturing technology of the glass and window industry, a ...
  • Wahl, Jan Philipp; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    Parts built by laser-based powder bed fusion (PBF-LB) experience intervals of heating and cooling during the powder deposition and the selective melting of successive layers. Short time intervals of cooling can lead to ...
  • Bergmann, J.P.; Bielenin, M.; Stambke, M.; Feustel, T.; Witzendorff, P.V.; Hermsdorf, J. (Amsterdam : Elsevier B.V., 2013)
    Pulsed laser welding of thin aluminum sheets is common for housing, where welding defects are detrimental especially in terms of hermetic packaging as well as electromagnetic compatibility. This paper shows investigations ...
  • Giovannetti, Federico; Kirchner, Maik; Sass, Rodja; Rockendorf, Gunter (London : Elsevier Ltd., 2016)
    The paper presents a novel concept of solar thermal panel specifically intended for building integration, aiming at a higher architectural quality and at a reduction of installation costs. The panel consists of a low-emissivity ...
  • Wippo, V.; Devrient, M.; Kern, M.; Jaeschke, P.; Frick, T.; Stute, U.; Schmidt, M.; Haferkamp, H. (Amsterdam : Elsevier B.V., 2012)
    An on-axis pyrometric-based temperature measurement method suitable for different laser transmission welding techniques is presented. A temperature detection during contour and quasi-simultaneous welding is demonstrated ...
  • Tröbs, M.; Chwalla, M.; Danzmann, K.; Fernández, Barránco, G.; Fitzsimons, E.; Gerberding, O.; Heinzel, G.; Killow, C.J.; Lieser, M.; Perreur-Lloyd, M.; Robertson, D.I.; Schuster, S.; Schwarze, T.S.; Ward, H.; Zwetz, M. (Bellingham : SPIE, 2017)
    Angular misalignment of one of the interfering beams in laser interferometers can couple into the interferometric length measurement and is called tilt-to-length (TTL) coupling in the following. In the noise budget of the ...
  • Devrient, M.; Kern, M.; Jaeschke, P.; Stute, U.; Haferkamp, H.; Schmidt, M. (Amsterdam : Elsevier B.V., 2013)
    Laser transmission welding is known for high flexibility, extraordinary potential for process automation and outstanding weld seam properties. Problems may occur due to the poor gap-bridging capability of contour welding. ...
  • Kuklik, Julian; Mente, Torben; Wippo, Verena; Jaeschke, Peter; Kaierle, Stefan; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2022)
    Laser transmission welding (LTW) is a known technique to join conventionally produced thermoplastic parts, e.g. injected molded parts. When using LTW for additively manufactured parts (usually prototypes, small series), ...
  • Jack, Steffen; Parzefall, Johannes; Luttmann, Thomas; Janßen, Philipp; Giovannetti, Federico (London : Elsevier Ltd., 2014)
    This paper presents a new flat plate collector technology based on heat pipes. The use of heat pipes can lead to several advantages over direct flow collectors: A simple hydraulic interconnection, an inherently limited ...
  • Föste, Sebastian; Pazidis, Alexandra; Reineke-Koch, Rolf; Hafner, Bernd; Mercs, David; Delord, Christine (London : Elsevier Ltd., 2016)
    Thermochromic absorber coatings, which switch their emissivity for thermal radiation depending on temperature, are developed to reduce the stagnation temperature of solar thermal collectors: In the operating range of the ...
  • Armano, M.; Audley, H.; Auger, G.; Baird, J.; Binetruy, P.; Born, M.; Bortoluzzi, D.; Brandt, N.; Bursi, A.; Caleno, M.; Cavalleri, A.; Cesarini, A.; Cruise, M.; Cutler, C.; Danzmann, K.; Diepholz, I.; Dolesi, R.; Dunbar, N.; Ferraioli, L.; Ferroni, V.; Fitzsimons, E.; Freschi, M.; Gallegos, J.; Marirrodriga, C.G.; Gerndt, R.; Gesa, L.; Gibert, F.; Giardini, D.; Giusteri, R.; Grimani, C.; Harrison, I.; Heinzel, G.; Hewitson, M.; Hollington, D.; Hueller, M.; Huesler, J.; Inchauspé, H.; Jennrich, O.; Jetzer, P.; Johlander, B.; Karnesis, N.; Kaune, B.; Korsakova, N.; Killow, C.; Lloro, I.; Maarschalkerweerd, R.; Madden, S.; Maghami, P.; Mance, D.; Martín, V.; Martin-Porqueras, F.; Mateos, I.; McNamara, P.; Mendes, J.; Mendes, L.; Moroni, A.; Nofrarias, M.; Paczkowski, S.; Perreur-Lloyd, M.; Petiteau, A.; Pivato, P.; Plagnol, E.; Prat, P.; Ragnit, U.; Ramos-Castro, J.; Reiche, J.; Perez, J.A.R.; Robertson, D.; Rozemeijer, H.; Russano, G.; Sarra, P.; Schleicher, A.; Slutsky, J.; Sopuerta, C.F.; Sumner, T.; Texier, D.; Thorpe, J.; Trenkel, C.; Tu, H.B.; Vetrugno, D.; Vitale, S.; Wanner, G.; Ward, H.; Waschke, S.; Wass, P.; Wealthy, D.; Wen, S.; Weber, W.; Wittchen, A.; Zanoni, C.; Ziegler, T.; Zweifel, P. (Bristol : Institute of Physics Publishing, 2015)
    The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will ...
  • Wesang, K.; Von Witzendorff, P.; Hohnholz, A.; Suttmann, O.; Kaierle, S.; Overmeyer, L. (Amsterdam : Elsevier B.V., 2018)
    Often Glass products achieve their component functionality only by a specific surface finishing, such as coating or patterning. Compared to vacuum based CVD and PVD coating techniques, the equipment for wet-chemical ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken