Auflistung An-Institute nach Dewey Decimal Classification

Auflistung An-Institute nach Dewey Decimal Classification

Sortiert nach: Sortierung: Ergebnisse:

  • A combined method for correlative 3D imaging of biological samples from macro to nano scale 
    Kellner, Manuela; Heidrich, Marko; Lorbeer, Raoul-Amadeus; Antonopoulos, Georgios C.; Knudsen, Lars; Wrede, Christoph; Izykowski, Nicole; Grothausmann, Roman; Jonigk, Danny; Ochs, Matthias; Ripken, Tammo; Kühnel, Mark P.; Meyer, Heiko (London : Nature Publishing Group, 2016)
    Correlative analysis requires examination of a specimen from macro to nano scale as well as applicability of analytical methods ranging from morphological to molecular. Accomplishing this with one and the same sample is ...
  • Additive manufacturing of glass: CO2-Laser glass deposition printing 
    Von Witzendorff, Philipp; Pohl, Leonhard; Suttmann, Oliver; Heinrich, Peter; Heinrich, Achim; Zander, Jörg; Bragard, Holger; Kaierle, Stefan (Amsterdam : Elsevier B.V., 2018)
    Additive manufacturing is used in several industrial sectors where polymers and metals are established materials. Different academic studies prove that additive manufacturing methods can be applied on glass materials using ...
  • Advanced high pressure turbine blade repair technologies 
    Alfred, Irene; Nicolaus, Martin; Hermsdorf, Jörg; Kaierle, Stefan; Möhwald, Kai; Maier, Hans Jürgen; Wesling, Volker (Amsterdam : Elsevier B.V., 2018)
    Components in aircraft engines and gas turbines are exposed to extreme conditions in order to increase performance and efficiency of the overall engine, hence there is an increasing need for cost-effective and time-efficient ...
  • Advances in powder bed based Additive Manufacturing of metal-glass-hybrid-components 
    Abel, Arvid; Sayilgan, Vurgun; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2022)
    As powder bed based additive manufacturing (AM) is gaining more traction in the research and industry, significant efforts are made to expand the capability of AM in combining different materials. Conventionally, multiple ...
  • Assembly cell for the manufacturing of flexible solar modules in building integrated photovoltaics 
    Blankemeyer, Sebastian; Schulte-Huxel, Henning; Wirtz, Wiebke; Raatz, Annika (Amsterdam [u.a.] : Elsevier, 2024)
    The current use of photovoltaics is often limited to the utilization of roof surfaces or ground-mounted systems. In particular, building integrated photovoltaics (BIPV) have enormous potential to make energy production ...
  • Atmospheric components and dopant carry-over influence during laser ablation 
    Schütz, Viktor; Haupt, Oliver; Stute, Uwe (London : Elsevier Ltd., 2011)
    In order to improve the efficiency of multi-crystalline (mc)-silicon solar cells, laser ablation as a non-contact tool is highly suitable for various processes. Apart from the laser and scanning parameters frequently ...
  • Calcium phosphate blossom for bone tissue engineering 
    Popov, Vladimir K.; Komlev, Vladimir S.; Chichkov, Boris (Amsterdam : Elsevier B.V., 2014)
    [No abstract available]
  • CO2 laser based welding of borosilicate glass by Laser Glass Deposition 
    Sleiman, Khodor; Legutko, Martin; Rettschlag, Katharina; Jäschke, Peter; Overmeyer, Ludger; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    Due to its thermal and chemical resistance, borosilicate glass finds a wide range of applications in optics, chemical laboratories and in glass apparatus engineering. For the manufacturing of complex glass components, the ...
  • Contactless quasi-steady-state photoconductance (QSSPC) characterization of metal halide perovskite thin films 
    Grimm, Benjamin; Wolter, Sascha J.; Schmidt, Jan ([London] : Macmillan Publishers Limited, part of Springer Nature, 2023)
    We apply the contactless quasi-steady-state photoconductance (QSSPC) method to co-evaporated methyl ammonium lead iodide (MAPbI3) perovskite thin-films. Using an adapted calibration for ultralow photoconductances, we extract ...
  • Crack repair of single crystal turbine blades using laser cladding technology 
    Rottwinkel, Boris; Nölke, Christian; Kaierle, Stefan; Wesling, Volker (Amsterdam : Elsevier B.V., 2014)
    The formation of cracks in single crystal (SX) turbine blades is a common problem for aero-engines. To repair cracks, which are located under the tip-area, a new method is to clad with single-crystal-technology. This ...
  • Demonstration of Feeding Vehicle-Integrated Photovoltaic-Converted Energy into the High-Voltage On-Board Network of Practical Light Commercial Vehicles for Range Extension 
    Peibst, Robby; Fischer, Hilke; Brunner, Manuel; Schießl, Andreas; Wöhe, S.; Wecker, Reinhard; Haase, Felix; Schulte-Huxel, Henning; Blankemeyer, Susanne; Köntges, Marc; Hollemann, Christina; Brendel, Rolf; Wetzel, Gustav; Krügener, Jan; Nonnenmacher, Hermann; Mehlich, Heiko; Salavei, Andrei; Ding, Kaining; Lambertz, Andreas; Pieters, Bart; Janke, Stefan; Stannowski, Bernd; Korte, Lars (Weinheim : Wiley-VCH, 2021)
    The setting up of a practical electrically driven light commercial demonstration vehicle with integrated photovoltaics (PV) is reported. The demonstrator vehicle is equipped with 15 modules based on the crystalline ...
  • Design of additively manufacturable injection molds with conformal cooling 
    Wahl, Jan Philipp; Niedermeyer, Jens; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    Additive manufacturing enables the production of intricate geometries including internal structures. This design freedom can be used advantageously to enhance heat transfer in injection molds by means of conformal cooling. ...
  • Determination of optimum process parameters for different Ti-6Al-4V powders processed by Laser-based Powder Bed Fusion 
    Emminghaus, Nicole; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    The PBF-LB (laser-based powder bed fusion) process is subject to a large number of variables, including the characteristics of the processed powder. Since a powder with a given specification can be supplied by various ...
  • Development of a laser powder bed fusion process tailored for the additive manufacturing of high-quality components made of the commercial magnesium alloy WE43 
    Julmi, Stefan; Abel, Arvid; Gerdes, Niklas; Hoff, Christian; Hermsdorf, Jörg; Overmeyer, Ludger; Klose, Christian; Maier, Hans Jürgen (Basel : MDPI AG, 2021)
    Additive manufacturing (AM) has become increasingly important over the last decade and the quality of the products generated with AM technology has strongly improved. The most common metals that are processed by AM techniques ...
  • Dialogleitfaden : Unterstützung zur Anwendung des Digitalisierungs-Checks 
    Kompetenzzentrum Digitales Handwerk (Hannover : Gottfried Wilhelm Leibniz Universität, 2018)
    Der digitale Wandel ist ein globaler Innovationsprozess, der massive Auswirkungen auf alle Bereiche der Wirtschaft und Gesellschaft hat. Unter dem Begriff Industrie 4.0 wird die Digitalisierung und Vernetzung der ...
  • Diode Factor in Solar Cells with Metastable Defects and Back Contact Recombination 
    Wang, Taowen; Ehre, Florian; Weiss, Thomas Paul; Veith‐Wolf, Boris; Titova, Valeriya; Valle, Nathalie; Melchiorre, Michele; Ramírez, Omar; Schmidt, Jan; Siebentritt, Susanne (Weinheim : Wiley-VCH, 2022)
    To achieve a high fill factor, a small diode factor close to 1 is essential. The optical diode factor determined by photoluminescence is the diode factor from the neutral zone of the solar cell and thus a lower bound for ...
  • Discoloration of AISI 420 stainless steel in dependence of inter layer time during Laser-based Powder Bed Fusion 
    Wahl, Jan Philipp; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan (Amsterdam [u.a.] : Elsevier, 2022)
    Parts built by laser-based powder bed fusion (PBF-LB) experience intervals of heating and cooling during the powder deposition and the selective melting of successive layers. Short time intervals of cooling can lead to ...
  • Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting 
    Gruene, Martin; Unger, Claudia; Koch, Lothar; Deiwick, Andrea; Chichkov, Boris (London : Biomed Central, 2011)
    Background: Laser-assisted bioprinting of multi-cellular replicates in accordance with CAD blueprint may substantially improve our understandings of fundamental aspects of 3 D cell-cell and cell-matrix interactions in ...
  • Ergebnisse des Digitalisierungs-Checks. Das Handwerk hat gesprochen 
    Kompetenzzentrum Digitales Handwerk, HPI (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2019)
    Die Digitalisierung verändert die Wirtschaft und ihre Wertschöpfungsprozesse grundlegend. Daraus entstehen innovative Möglichkeiten, aber auch viele neue Anforderungen an Handwerksbetriebe. Das Kompetenzzentrum Digitales ...
  • Ergebnisse des Digitalisierungs-Checks. Schwerpunkte und Entwicklungspotentiale im Handwerk 
    Wietfeld, Hans-Heinrich; Pirk, Walter; Pook, Hermann (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2021)
    Die Digitalisierung bleibt eine zentrale Herausforderung für die Wirtschaft, zugleich bietet sie viele Potenziale für eine zukunftsgerichtete Entwicklung. Gerade für das Handwerk ergeben sich dadurch neue Perspektiven. ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken