Rottwinkel, B.; Schweitzer, L.; Noelke, C.; Kaierle, S.; Wesling, V.: Challenges for single-crystal (SX) crack cladding. In: Physics Procedia 56 (2014), S. 301-308. DOI: https://doi.org/10.1016/j.phpro.2014.08.175
Zusammenfassung: | |
The formation of cracks in single-crystal (SX) turbine blades is a common problem for aero-engines. If cracks are located under the tip-area, the blade-repair is not possible. A new method to repair these cracks is to clad with single-crystal-technology. To reduce the loss of material and working time, notches are used to remove the affected crack zone. The used notch geometries must be weldable and also permit the material solidification in the same oriented plane as the original microstructure. For that, a thermal gradient has to be introduced in order to guide the grain growth. The process characteristics of laser cladding, such as small local heat input and controlled material supply, make it an efficient process to fill the notch. However, there are challenges to achieve a SX structure without cracks and pores. The unstable energy distribution may result in a polycrystalline structure. Current achievements and further challenges are presented in this paper. | |
Lizenzbestimmungen: | CC BY-NC-ND 3.0 Unported |
Publikationstyp: | Article |
Publikationsstatus: | publishedVersion |
Erstveröffentlichung: | 2014 |
Die Publikation erscheint in Sammlung(en): | An-Institute |
Pos. | Land | Downloads | ||
---|---|---|---|---|
Anzahl | Proz. | |||
1 | Germany | 60 | 60,61% | |
2 | United States | 21 | 21,21% | |
3 | China | 10 | 10,10% | |
4 | Hong Kong | 2 | 2,02% | |
5 | Vietnam | 1 | 1,01% | |
6 | Taiwan | 1 | 1,01% | |
7 | India | 1 | 1,01% | |
8 | Croatia | 1 | 1,01% | |
9 | United Kingdom | 1 | 1,01% | |
10 | Austria | 1 | 1,01% |
Hinweis
Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.