Auflistung Fakultät für Maschinenbau nach Publikationstyp

Auflistung Fakultät für Maschinenbau nach Publikationstyp

Sortiert nach: Sortierung: Ergebnisse:

  • Frequency Domain Model Selection for Servo Systems ensuring Practical Identifiability 
    Tantau, Mathias; Wielitzka, Mark; Ortmaier, Tobias; Perner, Lars (Piscataway, NJ : IEEE, 2020-10-13)
    Physically motivated models of servo control systems with coupled mechanics are required for control design, simulation etc. Often, however, the effort of modelling prohibits, these model-based methods in industrial ...
  • Fuel Consumption Due to Shaft Power Off-Takes from the Engine 
    Scholz, Dieter; Seresinhe, Ravinka; Staack, Ingo; Lawson, Craig (Aachen : Shaker, 2013)
    This paper looks at fuel consumption due to shaft power off-takes from the engine and the related increase in the aircraft’s fuel consumption. It presents a review and comparison of published and unpublished data on this ...
  • Functional integration for additively manufactured reflectors 
    Leuteritz, Georg; Rohling, Markus; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-23)
    This work investigates the possibilities of functional integration for reflective optics that are manufactured via Selective Laser Melting. A method for identifying a broad range of technical functions and concepts that ...
  • High-resolution headlamps: An innovative concept for the next-generation 
    Li, Yang; Knöchelmann, Marvin; Lachmayer, Roland (The 8th International Forum on Automotive Lighting (IFAL 2020) : Institut für Produktentwicklung und Gerätebau, Leibniz Universität Hannover, Deutschland, 2020-06-18)
    Headlamp systems have been undergoing rapid developments in recent years to enhance traffic safety and comfort, with the trend of having a higher resolution. This higher resolution brings forth functionalities such as ...
  • High-resolution headlamps: Innovative functionalities and the potential of using laser diodes as light sources 
    Li, Yang; Knöchelmann, Marvin; Lachmayer, Roland (2019-06-25)
    High-resolution headlamp systems are increasingly attracting attentions from OEMs and researchers, while plenty of innovative lighting functionalities such as precisely glare avoidance of high beam, fully adaptive driving ...
  • Highlighting New Possibilities: A Comparison of SLOT and CT in the Analysis of 3D Printed Optical Elements 
    Hill, Ole; Biermann, Tobias; Eckert, Gerrit; Sleiman, Khodor; Mesecke, Lennart; Rettschlag, Katharina; Jäschke, Peter; Kaierle, Stefan; Bigall, Nadja C.; Ripken, Tammo; Lachmayer, Roland; Wollweber, Merve (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2024)
    Novel printing techniques for optical elements produce characteristics in these optical elements which can sometimes not be resolved with classic testing or imaging methods. As highly individualized components often have ...
  • Hybrid Ray Tracing 
    Ley, Peer-Phillip; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2020)
    Nowadays optical systems are predominantly developed using conventional ray tracing methods such as sequential and non-sequential ray tracing. Sequential ray tracing is used in particular to design and optimize imaging ...
  • Hybrid simulation of thermo-optical effects in laser-based white light sources 
    Wolf, Alexander; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2016)
    Laser based remote phosphor light sources offer a very high brightness but are significantly influenced by the temperature of the phosphor conversion ceramic as well as self-absorption effects. This paper discusses both ...
  • Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading 
    Mimic, Dajan; Jätz, Christoph; Sauer, Philipp; Herbst, Florian (Zug : Global Power and Propulsion Society, 2018)
    Increasing the pressure recovery in diffusers is an ongoing endeavour in engineering. In this paper, we analyse, based on extensive numerical simulations and experiments conducted for a wide range of half-opening angles, ...
  • Investigation on an AC Grid Failure Handling of Industrial DC Microgrids with an Energy Storage 
    Männel, Alexander; Tappe, Svenja; Knöchelmann, Elias; Ortmaier, Tobias (Piscataway, NJ : IEEE, 2019)
    A new approach for more energy efficient industrial production processes are smart industrial direct current (DC) microgrids with one or more connections to the alternative current (AC) grid. The advantage of the DC-technology ...
  • Investigation on the role of atomization air mixing on the spray characteristics of air assisted atomizer 
    Kawaharada, Noritsune; Höltermann, Markus; Wichmar, Jan; Dinkelacker, Friedrich (Valencia : Editorial Universitat Politècnica de València, 2017)
    Air assisted atomizers are widely used for various purposes, for example coating processes, medical processes, and sprinkler. However, the spray development processes, especially the breakup phenomena are not fully understood ...
  • Joining TWIP-Steel Simulation Models 
    Folgar Ribadas, H.; Böddeker, T.; Chergui, A.; Ivanjko, M.; Gili, F.; Behrens, S. (Amsterdam : Elsevier, 2017)
    JoiningTWIP project aims to support the introduction of TWIP-steels for automotive applications (in cars, trucks and buses) by identifying possible applications and further developing mechanical and low-heat joining ...
  • Konzepte für hochauflösende Fahrzeugscheinwerfer unter Berücksichtigung der Étendue 
    Ley, Peer-Phillip; Held, Marcel Philipp; Wolf, Alexander; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2017-08-02)
    Die Auslegung effizienter Beleuchtungssysteme stellt eine zentrale Herausforderung bei der Entwicklung hochauflösender Fahrzeugscheinwerfer dar. In diesem Paper werden unterschiedliche Konzepte von Weißlichtquellen für ...
  • Konzepte zur Beleuchtung von Lichtmodulatoren 
    Ley, Peer-Phillip; Held, Marcel Philipp; Wolf, Alexander; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-18)
    Hochauflösende Pixellichtsysteme werden mithilfe verschiedener Modulatortechnologien in unterschiedlichen Anwendungsbereichen eingesetzt. Zur Umsetzung wirkungsgradstarker Systeme sind geeignete Beleuchtungskonzepte der ...
  • Laser-Surface-Treatment for Photovoltaic Applications 
    Horn, Alexander; Kalmbach, Cay-Christian; González Moreno, Javier; Schütz, Viktor; Stute, Uwe; Overmeyer, Ludger (Amsterdam : Elsevier, 2012)
    To increas the overall efficiency of photovoltaic systems, such as solar cells or modules, different laser surface treatments have been adopted. In this article laser processing is applied to reduce the reflectivity on ...
  • Lichtmodule auf Basis von laseraktiviertem Leuchtstoff für den Einsatz als Zusatzfernlicht 
    Lachmayer, Roland; Wolf, Alexander; Kloppenburg, Gerolf (Düsseldorf : VDI-Verlag, 2014)
    Helle, weiße LEDs kommen zunehmend in Neuentwicklungen von Fahrzeugscheinwerfern als Ersatz für klassische Xenon- und Halogen-Lichtquellen zum Einsatz. Einen nächsten Schritt in dieser Entwicklung stellen Lichtquellen auf ...
  • Load Profile Cycle Recognition for Industrial DC Microgrids with Energy Storage Systems 
    Männel, Alexander; Müller, Kevin; Knöchelmann, Elias; Ortmaier, Tobias (Piscataway, NJ : Institute of Electrical and Electronics Engineers Inc., 2020)
    Many consumers in production plants like industrial robots or tool machines perform repetitive movements, which lead to a cyclic load demand. However, these load profiles can usually only be roughly estimated at the planning ...
  • Map Management Approach for SLAM in Large-Scale Indoor and Outdoor Areas 
    Ehlers, Simon F. G.; Stuede, Marvin; Nuelle, Kathrin; Ortmaier, Tobias (Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc., 2020)
    This work presents a semantic map management approach for various environments by triggering multiple maps with different simultaneous localization and mapping (SLAM) configurations. A modular map structure allows to add, ...
  • Methodische Entwicklung eines opto-mechatronischen Systems am Beispiel eines hochadaptiven Fahrzeugscheinwerfers 
    Knöchelmann, Marvin; Ley, Peer-Phillip; Kloppenburg, Gerolf; Mozgova, Iryna; Lachmayer, Roland (Paderborn : Universität Paderborn, 2019-09-28)
    Für die Entwicklung optomechatronischer Produkte aus dem Bereich der Beleuchtungstechnik für Fahrzeuge kann das V-Modell der VDI 2206 angewandt werden. Als Anwendungsbeispiel wird die methodische Entwicklung eines hochadaptiven ...
  • Modeling and experimental validation of the influence of robot temperature on its energy consumption 
    Eggers, Kai; Knöchelmann, Elias; Tappe, Svenja; Ortmaier, Tobias (Piscataway, NJ : Institute of Electrical and Electronics Engineers Inc., 2018)
    This paper presents an approach to significantly improve modeling accuracy for the power and energy demands of industrial robots. This is achieved by taking the temperature dependency of the joint's viscuous friction ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken