Auflistung Weitere Einrichtungen nach Schlagwort "Laser"

Auflistung Weitere Einrichtungen nach Schlagwort "Laser"

Sortiert nach: Sortierung: Ergebnisse:

  • A novel approach for high deposition rate cladding with minimal dilution with an arc - Laser process combination 
    Barroi, A.; Hermsdorf, J.; Prank, U.; Kaierle, S. (Amsterdam : Elsevier B.V., 2013)
    First results of the process development of a novel approach for a high deposition rate cladding process with minimal dilution are presented. The approach will combine the enormous melting potential of an electrical arc ...
  • Adaptable orthopedic shape memory implants 
    Pfeifer, Ronny; Müller, Christian W.; Hurschler, Christof; Kaierle, Stefan; Wesling, Volker; Haferkamp, Heinz (Amsterdam : Elsevier B.V., 2013)
    Apart from biological factors, the bone healing process strongly depends on the mechanical properties of the implant applied. The stiffness of the implant influences the micro-motion, one of the most important stimuli of ...
  • Additive manufacturing of glass: CO2-Laser glass deposition printing 
    Von Witzendorff, Philipp; Pohl, Leonhard; Suttmann, Oliver; Heinrich, Peter; Heinrich, Achim; Zander, Jörg; Bragard, Holger; Kaierle, Stefan (Amsterdam : Elsevier B.V., 2018)
    Additive manufacturing is used in several industrial sectors where polymers and metals are established materials. Different academic studies prove that additive manufacturing methods can be applied on glass materials using ...
  • Concept of a bonding technology for dies below 150 micrometers 
    Gottwald, Simon Nicolas; Reitz, Birger; Albrecht, Daniel; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2020)
    Due to rising demand for electrically contacted bare dies, bonding rates are to be increased. Technically, however, current bonding processes are almost at their limit. The use of continuous and consistent kinematics of ...
  • Influence of the laser and its scan width in the LDNA surfacing process 
    Barroi, A.; Amelia, J.; Hermsdorf, J.; Kaierle, S.; Wesling, V. (Amsterdam : Elsevier B.V., 2014)
    The novel laser-assisted double-wire non-transferred arc (LDNA) surfacing process that melts two consumable wires with an arc between them and uses a laser to guide the process has shown very promising results. Investigations ...
  • Intracochlear near infrared stimulation: Feasibility of optoacoustic stimulation in vivo 
    Baumhoff, Peter; Kallweit, Nicole; Kral, Andrej (Amsterdam : Elsevier B.V., 2019)
    Intracochlear optical stimulation has been suggested as an alternative approach to hearing prosthetics in recent years. This study investigated the properties of a near infrared laser (NIR) induced optoacoustic effect. ...
  • Opto-Thermal simulation model for optimizing laser-excited remote phosphor systems 
    Chatzizyrli, Elisavet; Tinne, Nadine; Lachmayer, Roland; Neumann, Jörg; Kracht, Dietmar (Bellingham, Wash. : SPIE, 2018)
    A new family of lighting products is developed as laser diodes replace LEDs in the remote phosphor configuration. The resulting lighting systems, also known as laser-excited remote phosphor systems, exhibit advanced ...
  • Reduced wear and adhesion forces by laser dispersing of ceramics 
    Nölke, C.; Claußen, S.; Dudziak, S.; Haferkamp, H.; Barcikowski, S. (Amsterdam : Elsevier B.V., 2010)
    Laser dispersing offers a great potential to fabricate layers or tracks with tailored properties threat duce abrasive or adhesive wear at the surface of highly stressed components. Different ceramic powder materials like ...
  • Reliable copper spot welding with ir laser radiation through short prepulsing 
    Moalem, A.; Von Witzendorff, Philipp; Stute, U.; Overmeyer, Ludger (Amsterdam : Elsevier B.V., 2012)
    We demonstrate a technique, which significantly enhances the stability of copper welding with laser radiation. After modelling spot welding stability we conclude that oxide layer morphology typical for native oxide layers ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken