dc.identifier.uri |
http://dx.doi.org/10.15488/908 |
|
dc.identifier.uri |
http://www.repo.uni-hannover.de/handle/123456789/932 |
|
dc.contributor.author |
Abrão, A.M.
|
|
dc.contributor.author |
Denkena, Berend
|
|
dc.contributor.author |
Köhler, Jens
|
|
dc.contributor.author |
Breidenstein, Bernd
|
|
dc.contributor.author |
Mörke, Tobias
|
|
dc.date.accessioned |
2016-12-21T13:00:33Z |
|
dc.date.available |
2016-12-21T13:00:33Z |
|
dc.date.issued |
2014 |
|
dc.identifier.citation |
Abrão, A.M.; Denkena, B.; Köhler, J.; Breidenstein, B.; Mörke, T.: The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel. In: Procedia CIRP 13 (2014), S. 31-36. DOI: https://doi.org/10.1016/j.procir.2014.04.006 |
|
dc.description.abstract |
The aim of this work is to study the influence of selected deep rolling parameters (rolling pressure and number of passes) on the surface integrity of fully annealed AISI 1060 high carbon steel. In addition to the mechanical properties, a comprehensive investigation on surface integrity is carried out. The findings indicate that despite the increase in surface hardness and ultimate tensile stress, deep rolling can negatively affect the yield strength. The amplitude and functional roughness parameters show a considerable reduction after deep rolling, however, increasing rolling pressure and number of passes leads to poorer surface finish. Finally, the tensile residual stress generated by turning shifts to compressive values after deep rolling and the microhardness and microstructure analyses indicate that the depth of the layer affected by deep rolling depends on both the rolling pressure and number of passes. |
eng |
dc.description.sponsorship |
DFG/CRC/653 |
|
dc.description.sponsorship |
CAPES Foundation, Ministry of Education of Brazil |
|
dc.language.iso |
eng |
|
dc.publisher |
Amsterdam : Elsevier |
|
dc.relation.ispartofseries |
Procedia CIRP 13 (2014) |
|
dc.rights |
CC BY-NC-ND 3.0 Unported |
|
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/3.0/ |
|
dc.subject |
Deep rolling |
eng |
dc.subject |
Integrity |
eng |
dc.subject |
Residual stress |
eng |
dc.subject |
Mechanical properties |
eng |
dc.subject |
Rolling resistance |
eng |
dc.subject |
High carbon steels |
eng |
dc.subject |
Microhardness and microstructure |
eng |
dc.subject |
Roughness parameters |
eng |
dc.subject |
Surface integrity |
eng |
dc.subject |
Tensile residual stress |
eng |
dc.subject |
Ultimate tensile stress |
eng |
dc.subject |
Carbon steel |
eng |
dc.subject.classification |
Konferenzschrift |
ger |
dc.subject.ddc |
600 | Technik
|
ger |
dc.subject.ddc |
620 | Ingenieurwissenschaften und Maschinenbau
|
ger |
dc.title |
The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel |
eng |
dc.type |
Article |
|
dc.type |
Text |
|
dc.relation.issn |
22128271 |
|
dc.relation.doi |
https://doi.org/10.1016/j.procir.2014.04.006 |
|
dc.bibliographicCitation.volume |
13 |
|
dc.bibliographicCitation.firstPage |
31 |
|
dc.bibliographicCitation.lastPage |
36 |
|
dc.description.version |
publishedVersion |
|
tib.accessRights |
frei zug�nglich |
|