Influence of the cutting tool compliance on the workpiece surface shape in face milling of workpiece compounds

Show simple item record

dc.identifier.uri Denkena, Berend Hasselberg, E. 2016-12-16T07:50:11Z 2016-12-16T07:50:11Z 2015
dc.identifier.citation Denkena, B.; Hasselberg, E.: Influence of the cutting tool compliance on the workpiece surface shape in face milling of workpiece compounds. In: Procedia CIRP 31 (2015), S. 7-12. DOI:
dc.description.abstract A currently common method to design high-performance workpieces is to combine two or more materials to one compound. In this way, workpieces can be composed of the most qualified materials according to local loads. When machining high-performance workpiece compounds high quality requirements concerning the accuracy of dimension and shape as well as surface roughness must be fulfilled. However, in case of parallel machining, where the cutting edge moves from one material into the other within one cutting tool revolution, unequal cutting properties have a significant negative influence on tool wear and surface quality. Shape deviations of the surface occur, which are not detected when machining the single materials. The four most significant shape deviations that affect the workpiece quality are the material height deviation, transition deviation at the material joint as well as surface roughness deviation. This paper contains new approaches on the prediction of the surface shape that is generated by a face milling process. The focus is on the transition deviation at the material joint. It arises from a force impulse that is applied on the cutting tool and creates a wavy surface on the workpiece. This shape is predicted via cutting force prediction as well as frequency response analysis of the cutting tool and workpiece in relation to different tool holders. Furthermore, deviations between calculated surface shapes and measured surface shapes subsequent to machining tests are evaluated. eng
dc.description.sponsorship DFG/DE 447/113-1
dc.language.iso eng
dc.publisher Amsterdam : Elsevier
dc.relation.ispartofseries Procedia CIRP 31 (2015)
dc.rights CC BY-NC-ND 4.0 Unported
dc.subject Milling eng
dc.subject Workpiece compound eng
dc.subject Frequency response eng
dc.subject Lunar surface analysis eng
dc.subject Machining centers eng
dc.subject Milling (machining) eng
dc.subject Surface analysis eng
dc.subject Surface roughness eng
dc.subject Cutting edges eng
dc.subject Cutting forces eng
dc.subject Cutting properties eng
dc.subject Frequency response analysis eng
dc.subject Machining test eng
dc.subject New approaches eng
dc.subject Shape deviations eng
dc.subject Workpiece eng
dc.subject Cutting tools eng
dc.subject.classification Konferenzschrift ger
dc.subject.ddc 600 | Technik ger
dc.title Influence of the cutting tool compliance on the workpiece surface shape in face milling of workpiece compounds eng
dc.type Article
dc.type Text
dc.relation.issn 22128271
dc.bibliographicCitation.volume 31
dc.bibliographicCitation.firstPage 7
dc.bibliographicCitation.lastPage 12
dc.description.version publishedVersion
tib.accessRights frei zug�nglich

Files in this item

This item appears in the following Collection(s):

Show simple item record


Search the repository


My Account

Usage Statistics