dc.identifier.uri |
http://dx.doi.org/10.15488/824 |
|
dc.identifier.uri |
http://www.repo.uni-hannover.de/handle/123456789/848 |
|
dc.contributor.author |
Böß, Volker
|
|
dc.contributor.author |
Denkena, Berend
|
|
dc.contributor.author |
Henning, S.
|
|
dc.date.accessioned |
2016-12-16T07:23:11Z |
|
dc.date.available |
2016-12-16T07:23:11Z |
|
dc.date.issued |
2015 |
|
dc.identifier.citation |
Böß, V.; Denkena, B.; Henning, S.: Investigation of the skive hobbing process by applying a dexel-based cutting simulation. In: Procedia CIRP 37 (2015), S. 182-187. DOI: https://doi.org/10.1016/j.procir.2015.08.062 |
|
dc.description.abstract |
In this paper, a novel approach for cutting simulation of skive hobbing is presented. Skive hobbing is a process applied for finishing of already hardened gears. The process is characterized by varying tool engagements and very small chip thicknesses. The paper describes the process-modeling and the analysis of the workpiece-tool contact. For efficient modeling, a novel dexel-based method is presented for the description of a gear segment with discretized stock allowance. Characteristic of the method is an analytical description of the target workpiece contour which allows to describe points of the surface by Cartesian coordinates on the winding off. Dexel are oriented orthogonal to the surface of the final workpiece contour. The initial lengths of the dexel describe the stock allowance. By cutting these dexel with a tool, a time- and position-dependent prediction of material removal values, e.g. width of undeformed chip or undeformed chip thickness, is possible. Selected results are presented and interpreted. |
eng |
dc.description.sponsorship |
DFG/BO 3523/2-1 |
|
dc.language.iso |
eng |
|
dc.publisher |
Amsterdam : Elsevier |
|
dc.relation.ispartofseries |
Procedia CIRP 37 (2015) |
|
dc.rights |
CC BY-NC-ND 4.0 Unported |
|
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/4.0/ |
|
dc.subject |
cutting simulation |
eng |
dc.subject |
dexel-based approach |
eng |
dc.subject |
skive hobbing |
eng |
dc.subject |
Life cycle |
eng |
dc.subject |
Machining |
eng |
dc.subject |
Analytical description |
eng |
dc.subject |
Cartesian coordinate |
eng |
dc.subject |
Cutting simulation |
eng |
dc.subject |
dexel-based approach |
eng |
dc.subject |
Hobbing |
eng |
dc.subject |
Position dependents |
eng |
dc.subject |
Process Modeling |
eng |
dc.subject |
Undeformed chip thickness |
eng |
dc.subject |
Gears |
eng |
dc.subject.classification |
Konferenzschrift |
ger |
dc.subject.ddc |
600 | Technik
|
ger |
dc.title |
Investigation of the skive hobbing process by applying a dexel-based cutting simulation |
|
dc.type |
Article |
|
dc.type |
Text |
|
dc.relation.issn |
22128271 |
|
dc.relation.doi |
https://doi.org/10.1016/j.procir.2015.08.062 |
|
dc.bibliographicCitation.volume |
37 |
|
dc.bibliographicCitation.firstPage |
182 |
|
dc.bibliographicCitation.lastPage |
187 |
|
dc.description.version |
publishedVersion |
|
tib.accessRights |
frei zug�nglich |
|