Investigation of the skive hobbing process by applying a dexel-based cutting simulation

Show simple item record

dc.identifier.uri http://dx.doi.org/10.15488/824
dc.identifier.uri http://www.repo.uni-hannover.de/handle/123456789/848
dc.contributor.author Böß, Volker
dc.contributor.author Denkena, Berend
dc.contributor.author Henning, S.
dc.date.accessioned 2016-12-16T07:23:11Z
dc.date.available 2016-12-16T07:23:11Z
dc.date.issued 2015
dc.identifier.citation Böß, V.; Denkena, B.; Henning, S.: Investigation of the skive hobbing process by applying a dexel-based cutting simulation. In: Procedia CIRP 37 (2015), S. 182-187. DOI: https://doi.org/10.1016/j.procir.2015.08.062
dc.description.abstract In this paper, a novel approach for cutting simulation of skive hobbing is presented. Skive hobbing is a process applied for finishing of already hardened gears. The process is characterized by varying tool engagements and very small chip thicknesses. The paper describes the process-modeling and the analysis of the workpiece-tool contact. For efficient modeling, a novel dexel-based method is presented for the description of a gear segment with discretized stock allowance. Characteristic of the method is an analytical description of the target workpiece contour which allows to describe points of the surface by Cartesian coordinates on the winding off. Dexel are oriented orthogonal to the surface of the final workpiece contour. The initial lengths of the dexel describe the stock allowance. By cutting these dexel with a tool, a time- and position-dependent prediction of material removal values, e.g. width of undeformed chip or undeformed chip thickness, is possible. Selected results are presented and interpreted. eng
dc.description.sponsorship DFG/BO 3523/2-1
dc.language.iso eng
dc.publisher Amsterdam : Elsevier
dc.relation.ispartof 4th CIRP Global Web Conference, CIRPe 2015, 29th September - 1st October 2015
dc.relation.ispartofseries Procedia CIRP 37 (2015)
dc.rights CC BY-NC-ND 4.0 Unported
dc.rights.uri https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject cutting simulation eng
dc.subject dexel-based approach eng
dc.subject skive hobbing eng
dc.subject Life cycle eng
dc.subject Machining eng
dc.subject Analytical description eng
dc.subject Cartesian coordinate eng
dc.subject Cutting simulation eng
dc.subject dexel-based approach eng
dc.subject Hobbing eng
dc.subject Position dependents eng
dc.subject Process Modeling eng
dc.subject Undeformed chip thickness eng
dc.subject Gears eng
dc.subject.ddc 600 | Technik ger
dc.title Investigation of the skive hobbing process by applying a dexel-based cutting simulation
dc.type article
dc.type conferenceObject
dc.type Text
dc.relation.issn 22128271
dc.relation.doi https://doi.org/10.1016/j.procir.2015.08.062
dc.bibliographicCitation.volume 37
dc.bibliographicCitation.firstPage 182
dc.bibliographicCitation.lastPage 187
dc.description.version publishedVersion
tib.accessRights frei zug�nglich


Files in this item

This item appears in the following Collection(s):

Show simple item record

 

Search the repository


Browse

My Account

Usage Statistics