Auflistung Fakultät für Maschinenbau nach Publikationstyp

Auflistung Fakultät für Maschinenbau nach Publikationstyp

Sortiert nach: Sortierung: Ergebnisse:

  • Basic Comparison of Three Aircraft Concepts: Classic Jet Propulsion, Turbo-Electric Propulsion and Turbo-Hydraulic Propulsion 
    Rodrigo, Clinton (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - This thesis presents a comparison of aircraft design concepts to identify the superior propulsion system model among turbo-hydraulic, turbo-electric and classic jet propulsion with respect to Direct Operating ...
  • Comparative analysis of simulated and experimentally fabricated self-written waveguides 
    Baran, Murat (Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2021-04-15)
    In the last decades, the optical adhesives have become highly promising due to their widespread applications in the numerous optical fields. There are outnumbered research studies about them and their numerous fields of ...
  • Conditions for Passenger Aircraft Minimum Fuel Consumption, Direct Operating Costs and Environmental Impact 
    Caers, Brecht (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose – Find optimal flight and design parameters for three objectives: minimum fuel consumption, Direct Operating Costs (DOC), and environmental impact of a passenger jet aircraft. --- Approach – Combining multiple ...
  • Definition of an Ecolabel for Aircraft 
    Van Endert, Lynn (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2017)
    In attempting to increase the environmental awareness in the aviation sector and to eliminate the green washing phenomenon, an investigation was done into the development and definition of an ecolabel for aircraft. Based ...
  • Entwurf einer adaptiven Vorsteuerung für mechatronische Systeme basierend auf differentieller Flachheit 
    Schappler, Moritz (Hannover : Gottfried Wilhelm Leibniz Universität, 2014)
    Im Rahmen dieser Arbeit werden für einen Linearachsprüfstand modellbasierte Vorsteuerungen vorgestellt, experimentell umgesetzt und mit bestehenden Ansätzen verglichen. Für die modellbasierte Berechnung wird die Methode ...
  • Evaluation of the Hybrid-Electric Aircraft Project Airbus E-Fan X 
    Benegas Jayme, Diego (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - This master thesis evaluates the hybrid-electric aircraft project E-FAN X with respect to its economical and environmental performance in comparison to its reference aircraft, the BAe 146-100. The E-FAN X is ...
  • Experimental and Theoretical Studies on Design Calculations for Latent Heat Storage 
    Lindemann, Dieter (West Lafayette, Indiana, USA : School of Mechanical Engineering, Purdue University, 1987)
    Research was conducted to obtain design data of latent heat-of-fusion thermal energy storage (LHTES) devices. The devices studied utilize a porous medium (PM) to increase the effective conductivity of the storage system. ...
  • Förderung der interkulturellen Kompetenz durch die Verlagerung von Studienanteilen ins Ausland 
    Thiem, Silke (Hannover : Gottfried Wilhelm Leibniz Universität, 2019)
    Mit der voranschreitenden Europäisierung des Wirtschafts- und Bildungsraumes sehen sich Lehrkräfte damit konfrontiert, ihre Schülerinnen und Schüler mit der Vermittlung von interkulturellen Kompetenzen auf veränderte ...
  • Reverse Engineering of Passenger Jets – Classified Design Parameters 
    De Grave, Emiel (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2017)
    This thesis explains how the classified design parameters of existing passenger jets can be determined. The classified design parameters are; the maximum lift coefficient for landing and take-off, the maximum aerodynamic ...
  • Simulation of the Particle Distribution and Resulting Laser Processing of Selective Laser Melting Processes 
    Bode, Tobias (Hannover : Gottfried Wilhelm Leibniz Universität, 2017)
    Selective Laser Melting (SLM) is a 3D printing technology which is suited for additively manufacturing of metals and polymers. The main barriers of this process are the lack of reproducibility and the control of the influence ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken