Auflistung Fakultät für Maschinenbau nach Publikationstyp

Auflistung Fakultät für Maschinenbau nach Publikationstyp

Sortiert nach: Sortierung: Ergebnisse:

  • Additive Manufacturing of Functionalized Silicone Optics 
    Ziebehl, Arved (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023-09-20)
    Infusing highly transparent silicone optics with ferromagnetic particles makes these optical elements susceptible to controllable deformations. Lenses made of silicone can thus shift their focal length. This poster presents ...
  • Additive Manufacturing of Metallic Multi-Material Parts: Local Conductivity Adjustment through Functionally Graded Material Transitions of 316L and CuCrZr 
    Meyer, Ina; Glitt, Leon; Ehlers, Tobias (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023)
    Recently, powder bed-based additive manufacturing has made it possible to produce metallic multi-material parts where the material can be varied within the build plane voxel by voxel. This capability enables the realization ...
  • Anforderungen an die Ausleuchtung von Lichtmodulatoren 
    Held, Marcel Philipp; Ley, Peer-Phillip; Wolf, Alexander; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-18)
    Hochaufgelöste Beleuchtungssysteme erfordern für einen effizienten und lichtstarken Betrieb eine möglichst exakte Ausleuchtung der lichtmodulierenden Fläche. In diesem Paper werden relevante Technologien gegenübergestellt ...
  • Anisotropic characteristics analysis of 3D-printed optics 
    Grabe, Tobias; Biermann, Tobias; Bayerl, Maximilian; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2020)
    The Additive Manufacturing of transparent materials enables cost efficient rapidprototyping of optically transparent components. The components are built layer-by-layer which can cause anisotropic optical properties. We ...
  • Auto-tuning of PID Controllers for Robotic Manipulators Using PSO and MOPSO 
    Zidan, Ahmed; Tappe, Svenja; Ortmaier, Tobias (Cham : Springer, 2019)
    This work proposes two approaches to automatic tuning of PID position controllers based on different global optimization strategies. The chosen optimization algorithms are PSO and MOPSO, i. e. the problem is handled as a ...
  • Comparison of Additive Manufacturing techniques regarding mechanical and optical properties 
    Leuteritz, Georg; Lippert, René Bastian; Rettschlag, Katharina; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-20)
    This article examines whether optical and mechanical components can be additively manufactured with net shape properties. Furthermore various Additive Manufacturing techniques are investigated regarding the suitability for ...
  • Corrosion Behavior of an Additively Manufactured Functionally Graded Material 
    Steinhoff, Timon; Hölscher, Lennart; Klose, Christian; Hassel, Thomas; Maier, Hans Jürgen (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023-09-20)
    Dissimilar metal welds (DMW) combine the high strength and cost benefits of ferritic stainless steels with the high corrosion resistance of austenitic steels, and are thus commonly used in different types of power plants. ...
  • Cost-Optimized Control of DC Microgrids based on Characteristic Diagrams 
    Knöchelmann, Elias; Tappe, Svenja; Ortmaier, Tobias; Männel, Alexander (Piscataway, NJ : Institute of Electrical and Electronics Engineers Inc., 2019)
    This paper presents a novel approach for an energy control of a DC microgrid. It combines decentralized grid management and energy management. For this purpose, the conventional voltage droop curves are extended to a ...
  • Decentralized Cost-Optimized Fuzzy Control of DC Microgrids 
    Knöchelmann, Elias; Männel, Alexander; Goetjes, Björn; Tappe, Svenja; Ortmaier, Tobias (Piscataway, NJ : Institute of Electrical and Electronics Engineers Inc., 2019-05-20)
    This paper presents a novel method for designing a decentralized fuzzy controller for DC microgrids, aiming to reduce operating costs. Therefore, a classical fuzzy control is created for each power supplying grid user based ...
  • Design and Development of a Remote Lab for Hands-On Education in Mechatronics and Control Engineering 
    Zumsande, Johannes; Bosselmann, Steffen; Dagen, Matthias; Ortmaier, Tobias (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023)
    Demonstrators expand the theoretical lectures of control engineering by a practical hands-on experience to teach students the implementation and effects of a control algorithm and demonstrate the range of field starting ...
  • Design of a PI-Controller Based on Time-Domain Specification Utilizing the Parameter Space Approach 
    Popp, Eduard; Tantau, Mathias; Wielitzka, Mark; Giebert, Dennis; Ortmaier, Tobias (Frankfurt ; München [u.a.] : Elsevier, 2020)
    In automotive application PI and PID controllers are widely used. Commonly the controller parametrization is performed in a heuristic manner in the vehicle at different operating points. Model-based approaches offer many ...
  • Designing a methodological framework for the individualization of prosthetic implants: a literature-based approach 
    Müller, Patrik (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023-09-20)
    Despite the considerable advantages associated with product individualization, the utilization of standardized components prevails in medical devices like prosthetic implants. This is primarily due to the laborious and ...
  • Development of a Laser Double-wire Directed Energy Deposition Process for Functionally Graded Materials and In-situ alloying 
    Schwarz, Nick; Hermsdorf, Jörg; Ahlers, Henning; Lachmayer, Roland (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2024)
    Development of a Laser Double-wire Directed Energy Deposition process (LD-DED). Utilizing high material efficiency of the laser wire process for multi-material additive manufacturing. Enabling omnidirectional wire based ...
  • Distinguishability Analysis for Multiple Mass Models of Servo Systems with Commissioning Sensors 
    Tantau, Mathias; Perner, Lars; Wielitzka, Mark (Piscataway, NJ : IEEE, 2021)
    Physically motivated models of electromechanical motion systems enable model-based control theory and facilitate system interpretation. Unfortunately, the effort of modelling restricts the usage of model-based methods ...
  • DMD Based Automotive Lighting Unit 
    Wolf, Alexander; Kloppenburg, Gerolf; Danov, Roman; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2016-08-05)
    In this paper we present a DMD based automotive lighting unit. In order to generate a suitable light distribution a strongly distorting optical system is developed, offering a Hot Spot of 193 lx and a horizontal opening ...
  • Door opening and traversal with an industrial cartesian impedance controlled mobile robot 
    Stuede, Marvin; Nuelle, Kathrin; Tappe, Svenja; Ortmaier, Tobias (Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc., 2019)
    This paper presents a holistic approach for door opening with a Cartesian impedance controlled mobile robot, a KUKA KMR iiwa. Based on a given map of the environment, the robot autonomously detects the door handle, opens ...
  • Doping of Conveyor Belt Materials with Nanostructured Fillers to Adapt Innovative Performance Characteristics 
    Falkenberg, S.; Overmeyer, L. (2009)
    The "conveyor belt" as a product represents a complex high performance component with a wide range of different applications. Further development of these highly complex components demands an integration of new technologies ...
  • Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft 
    Kauth, Felix; Seume, Joerg R.; Mertens, Axel; Narjes, Gerrit; Ponick, Bernd; Müller, Jan-Kaspar (Zug : Global Power and Propulsion Society, 2018)
    This paper gives an overview of the interdisciplinary design process of an electrically-powered high-lift system for future commercial aircraft, with a focus on the mixed-flow compressor performance. Based on the requirements ...
  • Evaluating Aircraft with Electric and Hybrid Propulsion 
    Scholz, Dieter (Dorking, Surrey, UK : UKIP Media & Events, 2018)
    Purpose – This presentation takes a critical look at various electric air mobility concepts. With a clear focus on requirements and first principles applied to the technologies in question, it tries to bring inflated ...
  • Flutter Characteristics of Typical Wing Sections of a Box Wing Aircraft Configuration 
    Fazelzadeh, S. Ahmad; Scholz, Dieter; Mazidi, Abbas; Friswell, Michael I. (Paris : Association Aéronautique et Astronautique de France (3AF), 2018)
    In this paper, the aeroelastic modeling and conceptual flutter analysis of a simple 2-D box wing is investigated. For each wing the torsion and bending elasticity is simulated by two torsional and longitudinal springs at ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken