Auflistung Fakultät für Maschinenbau nach Schlagwörtern (GND)

Auflistung Fakultät für Maschinenbau nach Schlagwörtern (GND)

Sortiert nach: Sortierung: Ergebnisse:

  • 2019 International Aircraft Cabin Air Conference : Conference Proceedings – Presentations 
    Global Cabin Air Quality Executive (GCAQE) (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019-09-17)
    The International Aircraft Cabin Air Conferences are developing into a series of conferences organized every two years. The conferences are mapping the business, regulatory and technical solutions to aircraft cabin air ...
  • 2021 International Aircraft Cabin Air Conference: Conference Proceedings 
    Global Cabin Air Quality Executive (GCAQE) (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2021-03-15)
    The International Aircraft Cabin Air Conferences have developed into a series of conferences that were organized so far in 2017, 2019 and 2021. The conferences are mapping the business, regulatory and technical solutions ...
  • Aerodynamic Analysis with Athena Vortex Lattice (AVL) 
    Budziak, Kinga (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2015)
    This project evaluates the sutability and practicality of the program Athena Vortex Lattice (AVL) by Mark Drela. A short user guide was written to make it easier (especially for stu-dents) to get started with the program ...
  • Aircraft Fuel Consumption – Estimation and Visualization 
    Burzlaff, Marcus (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2017-12-13)
    In order to uncover the best kept secret in today’s commercial aviation, this project deals with the calculation of fuel consumption of aircraft. With only the reference of the aircraft manufacturer’s information, given ...
  • Aircraft Recycling – A Literature Review 
    Maaß, Svenja (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2020)
    Purpose - The report summarizes the state-of-the-art in aircraft end-of-life strategies. A focus is on latest aircraft types with a high percentage of composite materials. --- Methodology - A literature review is the basic ...
  • Analyse der neuen LTH-Methode zur Massenschätzung von Flugzeugbaugruppen 
    Pape, Arlind (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2018)
    In dieser Projektarbeit geht es um die Abschätzung von Massen der Hauptbaugruppen großer ziviler Verkehrsflugzeuge (MTOM > 40 t), sowie um die Abschätzung der Betriebsleermasse. Die Projektarbeit analysiert die 2013 im ...
  • Ausgewählte statistische Betrachtungen im Flugzeugentwurf: Superkritische Profile und Fahrwerk 
    Gulla, Duncan (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Kenntnisse über Parametereigenschaften und Charakteristiken von Flugzeugkomponenten sind eine wesentliche Grundlage für Methoden des Flugzeugentwurfs. Daher ist Ziel dieser Arbeit, statistische Merkmale und Kenngrößen einer ...
  • Basic Comparison of Three Aircraft Concepts: Classic Jet Propulsion, Turbo-Electric Propulsion and Turbo-Hydraulic Propulsion 
    Rodrigo, Clinton (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - This thesis presents a comparison of aircraft design concepts to identify the superior propulsion system model among turbo-hydraulic, turbo-electric and classic jet propulsion with respect to Direct Operating ...
  • Characteristics of the Specific Fuel Consumption for Jet Engines 
    Bensel, Artur (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2018)
    Purpose of this project is a) the evaluation of the thrust specific fuel consumption (TSFC) of jet engines in cruise as a function of flight altitude, speed and thrust and b) the determination of the optimum cruise speed ...
  • Continuous Open Access Special Issue "Aircraft Design": Number 2/2020 
    Scholz, Dieter; Torenbeek, Egbert; CEAS Technical Committee Aircraft Design (TCAD); Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences (Basel : MDPI, 2020-12-31)
    Following the successful initial Special Issue on “Aircraft Design (SI-1/2017)”, this is already the second SI “Aircraft Design (SI-2/2020)”. Activities in the past showed that aircraft design may be a field too small to ...
  • Continuous Open Access Special Issue "Aircraft Design": Number 3/2021 
    Scholz, Dieter; Torenbeek, Egbert; CEAS Technical Committee Aircraft Design (TCAD); Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences (Basel : MDPI, 2021-12-31)
    Following the successful initial Special Issue on "Aircraft Design (SI-1/2017)" and the relaunch with "Aircraft Design (SI-2/2020)", this is already the third SI in sequence named "Aircraft Design (SI 3/2021)". Activities ...
  • Dynamic Cabin Air Contamination Calculation Theory 
    Lakies, Marcel (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    In this report an equation is derived to calculate the dynamic effect of primary and secondary aircraft cabin air contamination. The equation is applied in order to understand implications and hazards. Primary contamination ...
  • Environmental Information for Aviation Passengers 
    Ridao Velasco, Alejandro (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2020)
    Purpose - Review of tools that inform passengers about the environmental impact of their flight. Review of tools that allow passengers to compare flying with other means of transportation. Improve already existing tools ...
  • Evaluating Aircraft with Electric and Hybrid Propulsion 
    Scholz, Dieter (Dorking, Surrey, UK : UKIP Media & Events, 2018)
    Purpose – This presentation takes a critical look at various electric air mobility concepts. With a clear focus on requirements and first principles applied to the technologies in question, it tries to bring inflated ...
  • Evaluation of the Hybrid-Electric Aircraft Project Airbus E-Fan X 
    Benegas Jayme, Diego (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - This master thesis evaluates the hybrid-electric aircraft project E-FAN X with respect to its economical and environmental performance in comparison to its reference aircraft, the BAe 146-100. The E-FAN X is ...
  • Fallbeispiele zum Reverse Engineering im Passagierflugzeugentwurf 
    Cheema, John Singh (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Zweck – In dieser Bachelorarbeit werden die öffentlich nicht zugänglichen Technologieparameter von Passagierflugzeugen näherungsweise bestimmt. Das sind maximaler Auftriebsbeiwert bei Start und Landung, maximale Gleitzahl ...
  • Flutter Characteristics of Typical Wing Sections of a Box Wing Aircraft Configuration 
    Fazelzadeh, S. Ahmad; Scholz, Dieter; Mazidi, Abbas; Friswell, Michael I. (Paris : Association Aéronautique et Astronautique de France (3AF), 2018)
    In this paper, the aeroelastic modeling and conceptual flutter analysis of a simple 2-D box wing is investigated. For each wing the torsion and bending elasticity is simulated by two torsional and longitudinal springs at ...
  • Die Genauigkeit einer vereinfachten Berechnung der Steigzeit von Flugzeugen 
    Mutschall, Marcel (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2018)
    Ziel – Die Zeit die ein Flugzeug benötigt, um auf eine bestimmte Höhe zu steigen (die Steigzeit) kann mit einer Formel berechnet werden, die vereinfachend annimmt, dass die Steiggeschwindigkeit über dem gesamten Steigflug ...
  • Health Monitoring for Aircraft Systems using Decision Trees and Genetic Evolution 
    Gerdes, Mike (Luleå, Sweden : Luleå University of Technology, Graphic Production, 2019)
    Reducing unscheduled maintenance is important for aircraft operators. There are significant costs if flights must be delayed or cancelled, for example, if spares are not available and have to be shipped across the world. ...
  • Kraftstoffverbrauch durch Entnahme von Zapfluft und Wellenleistung von Strahltriebwerken 
    Ahlefelder, Sebastian (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2006)
    Zapfluft und Wellenleistung wird den Triebwerken entnommen, um die Energie für beispielsweise die Kraftstoffpumpen, das Inflight Entertainment oder die Flügelvorderkantenenteisung zu erzeugen. Diese Energiegenerierung, hat ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken