Auflistung Fakultät für Maschinenbau nach Lizenz

Sortiert nach: Sortierung: Ergebnisse:

  • 3D Virtual Elements for Elastodynamic Problems 
    Cihan, Mertcan; Aldakheel, Fadi; Hudobivnik, Blaž; Wriggers, Peter (Weinheim : Wiley-VCH, 2021)
    A virtual element framework for nonlinear elastodynamics is outlined within this work. The virtual element method (VEM) can be considered as an extension of the classical finite element method. While the finite element ...
  • A control system for ultrasound devices utilized for inactivating E. coli in wastewater 
    Ohrdes, H.; Ille, I.; Twiefel, J.; Wallaschek, J.; Nogueira, R.; Rosenwinkel, K.-H. (Amsterdam [u.a.] : Elsevier Science, 2018)
    Sonochemical processes applied to wastewater treatment have an influence on the behavior of ultrasonic systems. This is especially due to the load characteristic of the sonochemical process itself and the temperature ...
  • A cover-based contact detection approach for irregular convex polygons in discontinuous deformation analysis 
    Zhuang, Xioaying; Zheng, Fei; Zheng, Hong; Jiao, Yu-Yong; Rabczuk, Timon; Wriggers, Peter (New York, NY [u.a.] : Wiley, 2021)
    Irregular polygon shapes (eg, with small edges or small angles) are usually encountered in the contact simulation of discrete block systems. Treatment of irregular polygons in contact detection process has critical effects ...
  • A multiscale study of hot-extruded CoNiGa ferromagnetic shape-memory alloys 
    Samothrakitis, Stavros; Buhl Larsen, Camilla; Woracek, Robin; Heller, Luděk; Kopeček, Jaromír; Gerstein, Gregory; Maier, Hans Jürgen; Rameš, Michal; Tovar, Michael; Šittner, Petr; Schmidt, Søren; Strobl, Markus (Amsterdam [u.a.] : Elsevier Science, 2020)
    Ferromagnetic shape-memory CoNiGa alloys have attracted much scientific interest due to their potential alternative use as high-temperature shape-memory alloys, bearing a high prospect for actuation and damping applications ...
  • A study of grease lubricants under wind turbine pitch bearing conditions 
    Schwack, Fabian; Bader, Norbert; Leckner, Johan; Demaille, Claire; Poll, Gerhard (Amsterdam [u.a.] : Elsevier Science, 2020)
    Pitch bearings in wind turbines are affected by reciprocating motion due to pitch control. The combination of oscillating operation, high loads, and mixed lubrication often leads to wear. Grease lubricants in wind turbine ...
  • A vibration control for disassembly of turbine blades 
    Mullo, Santiago D.; Pruna, Edwin; Wolff, Julius; Raatz, Annika (Amsterdam : Elsevier B.V., 2019)
    Typically, disassembly forces are unknown due to high forces or high temperatures during product operation, where assembly connections solidify. For the regulation of disassembly forces a controller is developed. The ...
  • Ablation and functionalization of flexographic printing forms using femtosecond lasers for additively manufactured polymer-optical waveguides 
    Wienke, A.; Hoffmann, G.-A.; Koch, J.; Jäschke, P.; Overmeyer, Ludger; Kaierle, Stefan (Amsterdam : Elsevier B.V., 2020)
    An efficient and low-cost approach to manufacture Opto-Mechatronic Interconnect Devices will be obligatory to handle the strongly increasing amount of data. The presented approach is based on a flexographic printing process. ...
  • Accelerated ageing of surface modified flax fiber reinforced composites 
    Vellguth, Natalie; Shamsuyeva, Madina; Endres, Hans-Josef; Renz, Franz (Amsterdam : Elsevier, 2021)
    The overall aim of this study is to evaluate application-oriented potential of biocomposites made of surface-modified flax fibers for use in engineering thermoplastics. The scope of the study includes analysis of the effect ...
  • An Active Damping Method for Chatter Vibration in Plunge Grinding Using Electromagnetic Actuators 
    Ahrens, M.; Dagen, M.; Denkena, Berend; Ortmaier, Tobias (Amsterdam : Elsevier, 2016)
    Using conventional grinding wheels, self-excited vibrations are one of the most limiting factors in terms of productivity and process stability in cylindrical plunge grinding. Depending on the dynamic behavior of the ...
  • Adaptive inspection planning using a digital twin for quality assurance 
    Reuter, Leon; Denkena, Berend; Wichmann, Marcel (Amsterdam [u.a.] : Elsevier, 2024)
    The integration of a digital twin into inspection planning enables a novel procedure that reduces avoidable inspection times and costs. This paper shows a method for component-specific adaption of inspection plans by feeding ...
  • Adaptive phase field simulation of quasi-static crack propagation in rocks 
    Zhou, Shuwei; Zhuang, Xiaoying (Amsterdam : Elsevier, 2018)
    In this study, we present an adaptive phase field method (APFM) for modeling quasi-static crack propagation in rocks. Crack initiation due to positive strains is considered, and a numerical simulation is implemented using ...
  • Additive manufacturing of multi-material parts – Design guidelines for manufacturing of 316L/CuCrZr in laser powder bed fusion 
    Meyer, Ina; Oel, Marcus; Ehlers, Tobias; Lachmayer, Roland (London [u.a.] : Elsevier, 2023)
    Additive manufacturing (AM) can be used to produce multi-material parts in which the material can be varied voxel-wise in all three spatial directions. This means that the paradigm of the homogeneous material can be abandoned ...
  • Additive refurbishment of a vibration-loaded structural component 
    Ganter, Nicola Viktoria; Ehlers, Tobias; Gembarski, Paul Christoph; Lachmayer, Roland (Cambridge : Cambridge University Press, 2021)
    In the event of damage to additively manufactured components whose shape cannot be produced by machining, an additive repair can potentially be not only ecologically but also ecologically more favorable than the production ...
  • Advanced Characterization Techniques for Turbine Blade Wear and Damage 
    Schlobohm, Jochen; Bruchwald, Oliver; Frąckowiak, Wojciech; Li, Yinan; Kästner, Markus; Pösch, Andreas; Reimche, Wilfried; Maier, Hans Jürgen; Reithmeier, Eduard (Amsterdam [u.a.] : Elsevier, 2017)
    This paper presents four complementary non-destructive measurement techniques for material characterization and damage detection of turbine blades. The techniques are macroscopic fringe projection with inverse fringe ...
  • Advanced process design for re-contouring using a time-domain dynamic material removal simulation 
    Denkena, Berend; Pape, O.; Grove, T.; Mücke, A. (Amsterdam : Elsevier B.V., 2019)
    The repair of components often requires the removal of excess weld material. This removal is considered as re-contouring. Re-contouring processes have to be designed individually for each case of damage to fulfil the high ...
  • Advances in powder bed based Additive Manufacturing of metal-glass-hybrid-components 
    Abel, Arvid; Sayilgan, Vurgun; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2022)
    As powder bed based additive manufacturing (AM) is gaining more traction in the research and industry, significant efforts are made to expand the capability of AM in combining different materials. Conventionally, multiple ...
  • Aerodynamic Feeding 4.0: A New Concept for Flexible Part Feeding 
    Kolditz, Torge; Raatz, Annika (Amsterdam [u.a.] : Elsevier, 2022)
    In modern production environments, the need for flexible handling systems constantly increases due to increasing uncertainties, shorter product life cycles and higher cost pressure. Part feeding systems are vital to modern ...
  • Aerodynamical and Structural Analysis of Operationally Used Turbine Blades 
    Schwerdt, Lukas; Hauptmann, Thomas; Kunin, Artsem; Seume, Jörg R.; Wallaschek, Jörg; Wriggers, Peter; Panning-von Scheidt, Lars; Löhnert, Stefan (Amsterdam : Elsevier BV, 2017)
    This paper presents an integrated methodology for the analysis of operationally-used turbine blades, incorporating aerodynamic and multiple structural simulations. In jet engines, blade rubbing and erosion lead to deviations ...
  • Agent collaboration in a multi-agent-system for analysis and optimization of mechanical engineering parts 
    Gembarski, Paul Christoph (Amsterdam [u.a.] : Elsevier, 2020)
    In mechanical engineering, designers have to review a designed artefact iteratively with different domain experts, e.g. from manufacturing, to avoid later changes and find a robust, optimized design. To support the designer, ...
  • An approach for choosing the cost effective design for a product-service system while maintaining its desired reliability 
    Schneider, Jannik Alexander; Mozgova, Iryna; Lachmayer, Roland (Cambridge : Cambridge University Press, 2019)
    With the spread of product-service systems as business models the life cycle costs are of increasing importance as a measurement of product cost. A key factor that drives these costs is the desired reliability of the ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken