Auflistung Fakultät für Maschinenbau nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation 
    Klauer, Katja; Eifler, Matthias; Kirsch, Benjamin; Böß, Volker; Seewig, Jörg; Aurich, Jan C. (London : Springer, 2021)
    The calibration of areal surface topography measuring instruments is of high relevance to estimate the measurement uncertainty and to guarantee the traceability of the measurement results. Calibration structures for optical ...
  • Analysis of LED arrangement in an array with respect to lens geometry 
    Ley, Peer-Phillip; Held, Marcel Philipp; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2018)
    Highly adaptive light sources such as LED arrays have been surpassing conventional light sources (halogen, xenon) for automotive applications. Individual LED arrangements within the array, high durability and low energy ...
  • Analysis of machine influence on process stability in sheet bulk metal forming 
    Salfeld, Valerian; Matthias, Tim; Krimm, Richard; Behrens, Bernd-Arno (Amsterdam : Elsevier BV, 2012)
    This contribution deals with the process-machine interaction while forming parts by sheet-bulk metal forming. The goal of this process is to form complex functional elements, such as gearing and carrier elements, by means ...
  • Analysis of the impact of data compression on condition monitoring algorithms for ball screws 
    Hinrichs, Reemt; Schmidt, Alexander; Koslowski, Julian; Bergmann, Benjamin; Denkena, Berend; Ostermann, Jörn (Amsterdam [u.a.] : Elsevier, 2021)
    The overall equipment effectiveness (OEE) is a management ratio to evaluate the added value of machine tools. Unplanned machine downtime reduces the operational availability and therefore, the OEE. Increased machine costs ...
  • Analytic roughness prediction by deep rolling 
    Denkena, B.; Abrão, A.; Krödel, A.; Meyer, K. (Heidelberg : Springer, 2020)
    Deep rolling is a widely applied mechanical surface and subsurface treatment method. It is typically used after conventional machining to improve the roughness, increase the surface hardness and to induce compressive ...
  • Anforderungen an die Ausleuchtung von Lichtmodulatoren 
    Held, Marcel Philipp; Ley, Peer-Phillip; Wolf, Alexander; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-18)
    Hochaufgelöste Beleuchtungssysteme erfordern für einen effizienten und lichtstarken Betrieb eine möglichst exakte Ausleuchtung der lichtmodulierenden Fläche. In diesem Paper werden relevante Technologien gegenübergestellt ...
  • Anisotropic characteristics analysis of 3D-printed optics 
    Grabe, Tobias; Biermann, Tobias; Bayerl, Maximilian; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2020)
    The Additive Manufacturing of transparent materials enables cost efficient rapidprototyping of optically transparent components. The components are built layer-by-layer which can cause anisotropic optical properties. We ...
  • Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021 
    Schüppstuhl, Thorsten; Tracht, Kirsten; Raatz, Annika (Cham : Springer Nature, 2022)
    This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and ...
  • Anticipatory Online Compensation of Tool Deflection Using a Priori Information from Process Planning 
    Denkena, Berend; Bergmann, Benjamin; Schumacher, Tim (Basel : MDPI, 2021)
    Removing excess material from build-up welding by milling is a critical step in the repair of blades from aircraft engines. This so-called recontouring is a very challenging machining task. Shape deviations often result ...
  • Antioxidant flavonoid-loaded nano-bioactive glass bone paste: in vitro apatite formation and flow behavior 
    Sohrabi, Mehri; Hesaraki, Saeed; Shahrezaee, Mostafa; Shams-Khorasani, Alireza; Roshanfar, Fahimeh; Glasmacher, Brigit; Heinemann, Sascha; Xu, Yi; Makvandi, Pooyan (Cambridge : Royal Society of Chemistry, 2024)
    Non-cement pastes in the form of injectable materials have gained considerable attention in non-invasive regenerative medicine. Different osteoconductive bioceramics have been used as the solid phase of these bone pastes. ...
  • Antriebsstrang 2025 : „Energieeffiziente Prozessketten zur Herstellung eines reibungs-, gewichts- und lebensdaueroptimierten Antriebsstrangs“ 
    Denkena, Berend; Poll, Gerhard; Dinkelacker, Friedrich; Handrup, Miriam; Katzsch, Daniel; Meyer, Kolja; Pillkahn, Philipp; Reuter, Leon; Schmidt, Christopher; Stelljes, Frederik (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023)
    Abschlussbericht zum BMWK-Verbundprojekt "Antriebsstrang 2025". Laufzeit 01.09.2018 - 28.02.2022.
  • Application of Decentralized and Self-Regulating Knowledge Bases for Assembly Design Automation 
    Plappert, Stefan; Becker, Christian; Gembarski, Paul Christoph; Lachmayer, Roland (Novi Sad : University of Novi Sad - Faculty of Technical Sciences, 2022)
    During product development, changes to parts that are already built into assemblies usually lead to the need to check the function and consistency of the assembly. This procedure is very time-consuming and has to be performed ...
  • Application of system dynamics for holistic product-service system development 
    Kloock-Schreiber, Daniel; Gembarski, Paul Christoph; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier, 2020)
    In order to develop Product Service Systems (PSS), a holistic view on the system and a coequal development of service and product parts is necessary. Particularly for the beginning of the development of PSS, existing ...
  • Application of the Computational Design Synthesis framework for individualized car seats 
    Steinnagel, Carl; Bastimar, Cem; Gembarski, Paul Christoph; Plappert, Stefan; Müller, Patrik; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier, 2023)
    The manufacturing capabilities of additive manufacturing allow great design freedom for mass customization of different products. This new solution space needs to be explored and served by engineers when designing individual ...
  • Application preparation of rod-shaped corundum grinding wheels 
    Denkena, Berend; Bergmann, Benjamin; Schulz, Alexander (Düsseldorf : VDI Fachmedien, 2023)
    Grinding processes are predominantly used to machine the final contour of workpieces. However, due to high thermal and mechanical load on the workpiece and tool, these processes are limited to low removal rates. The ...
  • Application-inspired additive manufacturing of Raman optics 
    Grabe, Tobias; Biermann, Tobias; Wolf, Alexander; Al-Nuwaider, Jassim; Krauss, Henrik; August, Jannes; Yu, Weijia; Heinz, Jannis Ben; Bayerl, Maximilian; Xu, Ke; Wang, Qiang; Wu, Junjun; Roth, Bernhard; Ren, Wei; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier Science, 2023)
    While additive manufacturing (AM) enables the production of versatile optical components, the limited knowledge of manufacturing processes makes the development of accurate simulation tools and evaluation criteria challenging. ...
  • Applications of Machine Learning in Manufacturing from a Job Order and Product Perspective : An Overview 
    Denkena, Berend; Dittrich, Marc-André; Noske, Hendrik; Kramer, Kathrin; Schmidt, Matthias (Berlin : de Gruyter, 2021)
    Machine learning as a subfield of artificial intelligence can contribute to accelerating the design of processes in manufacturing, reducing cycle times, improving quality, and making better use of production capacities. ...
  • Applying membrane mode enhanced cohesive zone elements on tailored forming components 
    Töller, Felix; Löhnert, Stefan; Wriggers, Peter (Basel : MDPI AG, 2020)
    Forming of hybrid bulk metal components might include severe membrane mode deformation of the joining zone. This effect is not reflected by common Traction Separation Laws used within Cohesive Zone Elements that are usually ...
  • Approach for Increasing the Resource Efficiency for the Production Process of Titanium Structural Components 
    Denkena, Berend; Jacob, Stefan (Amsterdam : Elsevier, 2015)
    Titanium structural components for the aircraft industry are usually manufactured from ingots of primary material. The process chain for the fabrication of these components consists of the production of titanium sponge, ...
  • Approach for modelling the Taylor-Quinney coefficient of high strength steels 
    Behrens, Bernd-Arno; Chugreev, Alexander; Bohne, Florian; Lorenz, Ralf (Amsterdam : Elsevier B.V., 2019)
    Precise knowledge of the temperature that arises in the material during plastic forming is of crucial importance, as it has a significant influence on material behaviour and therefore on the forming process. In order to ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken