Auflistung Fakultät für Maschinenbau nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Furtmann, Alexander (Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2017)
    [no abstract]
  • Denkena, Berend; Köhler, Jens; Breidenstein, Bernd; Mörke, Tobias (Amsterdam : Elsevier BV, 2011)
    In order to qualify residual stress relaxation as an indicator of mechanical overloading of machined parts, an individually designed residual stress profile has to be allocated. Even though numerous investigations have ...
  • Sajadifar, Seyed Vahid; Maier, Hans Jürgen; Niendorf, Thomas; Yapici, Guney Guven (Basel : MDPI, 2023)
    In the present work, the elevated-temperature deformation characteristics and microstructural evolution of a Ti-5V-5Mo-5Cr-4Al alloy in solution-treatment conditions were studied under a tensile load at temperatures in the ...
  • Schneider, Volker; Liu, Hai-Chao; Bader, Norbert; Furtmann, Alexander; Poll, Gerhard (Amsterdam [u.a.] : Elsevier Science, 2020-10-19)
    Electrical bearing capacitance plays an important role in the prediction of harmful bearing currents, which could lead to premature failure of the bearing and the entire drive system. The effect of rolling speed, force, ...
  • Görke, Matthias; Bellmann, Vivian; Busch, Jan; Nyhuis, Peter (Amsterdam : Elsevier BV, 2017)
    Global competition and individual customer requirements generate challenges for manufacturing companies. To cope with these challenges, companies require an increased level of flexibility. In the first place, this flexibility ...
  • Denkena, Berend; Lepper, Thomas (Amsterdam : Elsevier, 2015)
    This paper focuses on a cost-effective manufacturing of large frame parts for aerospace industries with an industrial robot. The main challenge is the low stiffness of a serial kinematic, resulting in positioning errors ...
  • Breidenstein, B.; Denkena, Berend; Grove, T.; Hockauf, R. (Amsterdam : Elsevier, 2016)
    The machining process affects quality and function of components. For this reason, it is an important key competence of the manufacturer. Over the past years, counterfeit products have been threatening the user and damaged ...
  • Gryshkov, Oleksandr; Pogozhykh, Denys; Hofmann, Nicola; Pogozhykh, Olena; Müller, Thomas; Glasmacher, Birgit (San Francisco : Public Library of Science, 2014-09-26)
    Alginate cell-based therapy requires further development focused on clinical application. To assess engraftment, risk of mutations and therapeutic benefit studies should be performed in an appropriate non-human primate ...
  • Kundrat, Dennis; Fuchs, Alexander; Schoob, Andreas; Kahrs, Lüder Alexander; Ortmaier, Tobias (Bellingham, Wash. : SPIE, 2016)
    The introduction of Er:YAG lasers for soft and hard tissue ablation has proven promising results over the last decades due to strong absorption at 2.94 μm wavelength by water molecules. An extension to endoluminal applications ...
  • Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2015)
    Sheet-bulk metal forming is a new production process capable of performing deep-drawing and massive forming steps in a single operation. However, due to the high forming forces of the forming process, continuous process ...
  • Eggers, Kai Benjamin (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2019)
    Beim Erwerb eines Industrieroboters werden heutzutage nicht mehr nur klassische Faktoren wie die minimal erreichbare Taktzeit und die Anschaffungskosten als Kaufkriterien betrachtet, sondern auch der Leistungs- und ...
  • Rehe, M.; Denkena, Berend; Wagener, C. (Amsterdam : Elsevier B.V., 2018)
    Modern production environments require transparency regarding production status to detect the optimization potential. One of the indicators to identify this potential is the Overall Equipment Effectiveness (OEE). It is ...
  • Grzesik, Wit; Denkena, Berend; Żak, Krzysztof; Grove, Thilo; Bergmann, Benjamin (London : Springer, 2016)
    In this paper, the contribution of tool wear to the energy balance was determined for precision hard turning using chamfered CBN cutting tools. The tool nose wear VBC and the corresponding changes of component forces Fc, ...
  • Heiden, Bernhard; Koren, Christian; Alieksieiev, Volodymyr; Tonino-Heiden, Bianca (Setúbal : SciTePress - Science and Technology Publications, Lda., 2022)
    In this paper, the previously designed and implemented spiderino robot-o, or a robot used to act in a swarm for educational purposes, is investigated regarding his energy-consuming properties. An experimental setup consists ...
  • Fink, Daniel; Shugar, Sean; Ziaukas, Zygimantas; Schweers, Christoph; Trabelsi, Ahmed; Jacob, Hans-Georg (Setúbal : SciTePress - Science and Technology Publications, Lda., 2022)
    Targeting a resource-efficient automotive traffic, modern driver assistance systems include speed optimization algorithms to minimize the vehicle’s energy demand, based on predictive route data. Within these algorithms, ...
  • Denkena, Berend; Dittrich, Marc-André; Jacob, Stefan (Amsterdam : Elsevier, 2016)
    High production costs and material removal rates characterize the manufacturing of aircraft components made of titanium. Due to competitive pressure, the manufacturing processes are highly optimized from an economical ...
  • Denkena, Berend; Abele, Eberhard; Brecher, Christian; Dittrich, Marc-André; Kara, Sami; Mori, Masahiko (Oxford : Elsevier, 2020)
    The growing global energy demand from industry results in significant ecological and economical costs. Aiming to decrease the impact of machining operations, an increasing number of research activities and publications ...
  • Denkena, Berend; Dittrich, Marc-André; Bergmeier, Maik; Handrup, Miriam; Meyer, Kolja; Onken, Laura; Schmidt, Christopher (Amsterdam [u.a.] : Elsevier, 2020)
    Mobility is one of the major drivers of greenhouse gas emissions (GHG). The project Powertrain 2025 addresses this issue through the optimization of selected powertrain components in terms of friction, weight and service ...
  • Denkena, Berend; Möhring, H.-C.; Hesse, P. (London : SAGE Publications Ltd., 2007)
    This paper describes the energy flow in jerk-decoupled translatory feed axes. After an introductory survey on jerk-decoupled feed axes, a system simulation is presented. This system simulation includes a model of the ...
  • Terwey, J.T.; Fourati, M.A.; Pape, F.; Poll, G. (Basel : MDPI AG, 2020)
    Adhesive wear in dry contacts is often described using the Archard or Fleischer model. Both provide equations for the determination of a wear volume, taking the load, the sliding path and a set of material parameters into ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken