Browsing Fakultät für Maschinenbau by Title

Browsing Fakultät für Maschinenbau by Title

Sort by: Order: Results:

  • Rizvi, Sadiq; Ley, Peer-Phillip; Knöchelmann, Marvin; Lachmayer, Roland (Bellingham, WA : SPIE - International Society for Optical Engineering, 2018)
    Research reveals that visual information forms the major portion of the received data for driving. At night -owing to the, sometimes scarcity, sometime inhomogeneity of light- the human physiology and psychology experiences ...
  • Stolbchenko, Mykhailo; Grydin, Olexandr; Nürnberger, Florian; Samsonenko, Andrii; Schaper, Mirko (Amsterdam : Elsevier, 2014)
    In the present study experimental results of twin-roll cast aluminium-steel clad strips of a thickness of 2.0 mm using the example of pure aluminium and an austenitic steel are presented. Electron probe measurements of the ...
  • Kloppenburg, Gerolf (Garbsen : TEWISS - Technik und Wissen GmbH, 2017)
    Die Forschung an neuartigen Beleuchtungssystemen für das Fahrzeug zielt darauf ab, dem Fahrer eine optimale Sicht und Ausleuchtung der Umgebung zu ermöglichen. Dies ist insbesondere vor dem Hintergrund relevant, dass der ...
  • Schöler, S.; Yilkiran, D.; Wulff, D.; Özkaya, F.; Möhwald, K.; Behrens, Bernd-Arno; Maier, H.J. (Les Ulis : EDP Sciences, 2018)
    For the realization of liquid lubricant free forming processes different approaches are conceivable. The priority program 1676 "Dry forming - Sustainable production through dry machining in metal forming" addresses this ...
  • Denkena, Berend; Dahlmann, Dominik; Damm, J. (Amsterdam : Elsevier, 2015)
    Modern monitoring systems in machine tools are able to detect process errors promptly. Still, the application of monitoring systems is restricted by the complexity of parameterization for save monitoring. In most cases, ...
  • Denkena, Berend; Dittrich, Marc-André; Uhlich, Florian (Amsterdam : Elsevier, 2016)
    The continuous integration of manufacturing systems and sensory components leads to an increasing amount of available process data. In addition, new database systems and the parallelization of data processing enable to ...
  • Denkena, Berend; Dahlmann, D.; Damm, J. (Amsterdam : Elsevier, 2014)
    Modern monitoring systems in machine tools are able to detect process errors promptly. Still, the application of monitoring systems is restricted by the complexity of parameterization for save monitoring. In most cases, ...
  • Behrens, Bernd-Arno; Chugreev, Alexander; Awiszus, Birgit; Graf, Marcel; Kawalla, Rudolf; Ullmann, Madlen; Korpala, Grzegorz; Wester, Hendrik (Basel : MDPI AG, 2018)
    Increasing product requirements have made numerical simulation into a vital tool for the time- and cost-efficient process design. In order to accurately model hot forging processes with finite, element-based numerical ...
  • Denkena, Berend; Dahlmann, Dominik; Kiesner, Johann (Amsterdam : Elsevier, 2014)
    Failures in workpiece positioning influence the machining conditions and outcome of machine tools directly. Hence, the monitoring by a sensor integrated clamping system to avoid rejects is subject of the presented work. ...
  • Denkena, Berend; Dahlmann, D.; Boujnah, H. (Amsterdam : Elsevier, 2016)
    Several research projects deal with the development of sensory machine components for process monitoring. Especially those components, which are closely located to the process, show acceptable sensitivities to process loads ...
  • Mroz, G.; Reimche, W.; Frackowiak, W.; Bruchwald, O.; Maier, Hans Jürgen (Amsterdam : Elsevier, 2014)
    Problematic requirements, regarding the assessment of the integrity of highly loaded components require that modern methods be developed to record the component's loading history during its life cycle. New developments are ...
  • Behrens, Bernd-Arno; Doege, E.; Krimm, R. (London : SAGE Publications Ltd., 2006)
    The production processes of sheet metal products with complex geometries often use transfer presses to obtain fully formed workpieces from a single machine. The job of adjusting a new multistage tool set increases with the ...
  • Eilts, P. (London : SAGE Publications Ltd., 1991)
    The drop in wall heat losses with increasing engine size is shown not to be due to the decreasing surface-volume ratio, because this influence is compensated by the engine speed, which also drops. Instead, the heat-transfer ...
  • Krebs, Daniel; Borchert, Gunnar; Raatz, Annika (Amsterdam : Elsevier B.V., 2016)
    The article focuses on methods for designing modular cable-driven orientation mechanisms that can be attached to robot systems that lack on rotational degrees of freedom. The approach yields assembly systems for high speed ...
  • Denkena, Berend; Koeller, M. (Amsterdam : Elsevier, 2013)
    Process monitoring can prevent machine and tool failure in metal-cutting. A successful process monitoring of cutting processes depends on reliable monitoring limits for the process. In industrial applications these limits ...
  • Brüning, Jan; Denkena, Berend; Dittrich, Marc-André; Park, Hong-Seok (Amsterdam : Elsevier B.V., 2016)
    Today, especially machining of large, integral constructed structural parts requires expensive machining centers. In contrast, modern industrial robots are characterized by flexible applications, large working spaces and ...
  • Denkena, Berend; Fischer, Ruben; Euhus, Dirk; Neff, Thomas (Amsterdam : Elsevier, 2014)
    Process monitoring makes an essential contribution to process safety and workpiece quality in cutting machining processes. Conventional monitoring techniques have been successfully used to detect deviations from fault free ...
  • Suar, Monali; Rahlves, Maik; Reithmeier, Eduard; Roth, Bernhard (Bellingham, WA : SPIE - International Society for Optical Engineering, 2018)
    Straight and bent self-written waveguides (SWWs) are formed within a photomonomer mixture by means of a self-trapping effect when a single laser beam or two laser beams with tilt are propagated inside. These SWWs can be ...
  • Kelb, Christian (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2018)
    Diese Arbeit ist entstanden im Rahmen des Sonderforschungsprogramms SFB 123 ” PlanOS“ und beschreibt die Auslegung, Herstellung und Charakterisierung zweier polymerbasierter Dehnungssensoren, die ausschließlich auf ...
  • Wolff, Julius; Kolditz, Torge; Fei, Yangyang; Raatz, Annika (Amsterdam : Elsevier B.V., 2018)
    While joining tolerances, and therefore forces, are known in the assembly process, the determination of disassembly forces is not possible. This is caused by changes of the product properties during the product operation, ...

Search the repository


Browse

My Account

Usage Statistics