Auflistung Fakultät für Maschinenbau nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Substrate modification influence on properties of nanocomposite based on TiO2 and gold nanoparticles 
    Mishin, M.V.; Vorobyev, A.A.; Kondrateva, A.S.; Koroleva, E.Y.; Karaseov, P.A.; Bespalova, P.G.; Shakhmin, A.L.; Glukhovskoy, A.V.; Wurz, M.C.; Filimonov, A.V. (Bristol : Institute of Physics Publishing, 2019)
    In this work, we study photo-induced current transfer through nanocomposite structures consisting of the TiO2 coating activated with plasmonic gold nanoparticles on top of pillar-like structured SiO2. It is shown that the ...
  • Suitability of natural rocks as materials for cutting tools 
    Denkena, Berend; Breidenstein, Bernd; Krödel, Alexander; Bergmann, Benjamin; Picker, Tobias; Wolters, Philipp ([Cham] : Springer International Publishing, 2021)
    This study presents an investigation of the usability and suitability of natural rocks as cutting tool materials. Therefore, indexable inserts are manufactured from eight different rocks and two mono minerals in this study ...
  • Surface integrity of laser beam welded steel– aluminium alloy hybrid shafts after turning 
    Nothdurft, Sarah; Prasanthan, Vannila; Denkena, Berend; Breidenstein, Bernd; Grove, Thilo; Ohrdes, Hendrik; Twiefel, Jens; Wallaschek, Jörg; Hassel, Thomas; Hermsdorf, Jörg; Overmeyer, Ludger; Kaierle, Stefan (Basel : MDPI AG, 2019)
    The demands for high-performance solid components are constantly increasing. The reason for this development are the steadily growing requirements such as weight reduction, higher resistance to load stresses, and more ...
  • Surface roughness of real operationally used compressor blade and blisk 
    Gilge, Philipp; Kellersmann, Andreas; Friedrichs, Jens; Seume, Jörg R. (London : SAGE Publications Ltd., 2019)
    Deterioration of axial compressors is in general a major concern in aircraft engine maintenance. Among other effects, roughness in high-pressure compressor reduces the pressure rise and thus efficiency, thereby increasing ...
  • Surface topography after deep rolling with milling kinematics 
    Denkena, Berend; Krödel, Alexander; Heikebrügge, Steffen; Meyer, Kolja; Pillkahn, Philipp (Berlin : Springer, 2021)
    Deep rolling is a machining process which is used to decrease roughness and to induce compressive residual stresses into component surfaces. A recent publication of this research group showed possibilities to predict the ...
  • Survey of on-road image projection with pixel light systems 
    Rizvi, Sadiq; Knöchelmann, Marvin; Ley, Peer-Phillip; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2017)
    HID, LED and laser-based high resolution automotive headlamps, as of late known as pixel light systems', are at the forefront of the developing technologies paving the way for autonomous driving. In addition to light ...
  • Sustainability Assessment of Products manufactured by the Laser Powder Bed Fusion (LPBF) Process 
    Wurst, Johanna; Mozgova, Iryna; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier, 2022)
    Assessing the sustainability of a product is dependent on considering individual product life cycle data. Based on the information on material, energy and information flows, evaluation tools such as the life cycle assessment ...
  • Swirl and blade wakes in the interaction between gas turbines and exhaust diffusers investigated by endoscopic particle image velocimetry 
    Opilat, Victor (Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2011)
    [no abstract]
  • Synergistic approaches to ultra-precision high performance cutting 
    Schönemann, Lars; Berger, Daniel; Dörgeloh, Timo; Riemer, Oltmann; Brinksmeier, Ekkard; Krüger, Rudolf; Schreiber, Per; Denkena, Berend; Hochbein, Johannes; Parsa, Nasrin; Schenck, Christian; Kuhfuß, Bernd (Amsterdam [u.a.] : Elsevier, 2020)
    Diamond milling allows for the flexible production of optical and high precision parts, but suffers from poor setup and production speeds. This paper presents recent advances that aim towards achieving high performance ...
  • Syrian Refugees’ Integration Policies in Jordanian Labor Market 
    Alshwawra, Ahmad (Basel : MDPI, 2021)
    The Government of Jordan declared that there are more than one million Syrian refugees in Jordan while UNHCR statistics show that the number is about 700,000. Nonetheless, it is still a large problem for Jordan, especially ...
  • System efficiency of laser-based white light 
    Lachmayer, Roland; Wolf, Alexander; Kloppenburg, Gerolf (Berlin : Walter de Gruyter, 2014)
    For many lighting applications, light-emitting diodes (LEDs) are replacing traditional light sources providing the possibility for smart and efficient systems as well as a reduction in the product weight. A next step in ...
  • System Simulation and Analysis of an LNG-Fueled SOFC System Using Additively Manufactured High Temperature Heat Exchangers 
    Hollmann, Jan; Fuchs, Marco; Spieker, Carsten; Gardemann, Ulrich; Steffen, Michael; Luo, Xing; Kabelac, Stephan (Basel : MDPI, 2022)
    A laboratory-scale solid oxide fuel cell (SOFC) system using liquefied natural gas (LNG) as a fuel is designed to be used as an energy converter on seagoing vessels (MultiSchIBZ project). The presented system design phase ...
  • System-Integrated Intelligence – New Challenges for Product and Production Engineering 
    Trächtler, Ansgar; Denkena, Berend; Thoben, Klaus-Dieter (Amsterdam : Elsevier, 2016)
    The editorial introduces the SysInt conference series and the motivation behind it. It describes the structures and content as well as the scientific and technological background to the SysInt 2016 event held in Paderborn ...
  • System-integrated Intelligence – New Challenges for Product and Production Engineering in the Context of Industry 
    Thoben, Klaus-Dieter; Busse, Matthias; Denkena, Berend; Hausemeier, Jürgen (Amsterdam : Elsevier, 2014)
    The editorial introduces the SysInt conference series and the motivation behind it. It describes the structure and content as well as the scientific and technological background to the SysInt 2014 event held in Bremen from ...
  • Systematic Fitting and Comparison of Hyperelastic Continuum Models for Elastomers 
    Ricker, Alexander; Wriggers, Peter (Dordrecht [u.a.] ; Berlin ; Heidelberg : Springer, 2023)
    Hyperelasticity is a common modeling approach to reproduce the nonlinear mechanical behavior of rubber materials at finite deformations. It is not only employed for stand-alone, purely elastic models but also within more ...
  • Tailored Forming of Hybrid Bevel Gears with Integrated Heat Treatment 
    Behrens, Bernd-Arno; Diefenbach, Julian; Chugreeva, Anna; Kahra, Christoph; Herbst, Sebastian; Nürnberger, Florian (Amsterdam [u.a.] : Elsevier, 2020)
    “In recent years, multi-material designs of technical components have been gaining in importance. When combining different materials in a single component, it is possible to achieve high performance and extended functionality ...
  • Tailored Forming of hybrid bulk metal components 
    Behrens, Bernd-Arno; Uhe, Johanna; Ross, Ingo; Peddinghaus, Julius; Ursinus, Jonathan; Matthias, Tim; Bährisch, Susanne (Paris [u.a.] : Springer, 2022)
    Multi-material bulk metal components allow for a resource efficient and functionally structured component design, with a load adaptation achieved in certain functional areas by using similar and dissimilar material ...
  • Tailoring Soft Local Zones in Quenched Blanks of the Steel 22MnB5 by Partial Pre-cooling with Compressed Air 
    Golovko, Oleksandr; Stolte, Max-Henry; Wölki, Kai; Hübner, Sven; Behrens, Bernd-Arno; Maier, Hans Jürgen; Nürnberger, Florian (New York, NY : Springer, 2020)
    The high-strength boron steel 22MnB5 steel is widely used for automotive lightweight constructions. A novel approach is promising to tailor strength and ductility in the hardened condition using locally pre-tempered sheets ...
  • Tailoring the Curing Kinetics of NBR-Based Rubber Compounds for Additive Manufacturing of Rod Seals 
    Sundermann, Lion; Leineweber, Sebastian; Klie, Benjamin; Wittek, Heike; Ebel, Thomas; Reitz, Birger; Ottink, Kathrin; Graf, Matthias; Lankenau, Tobias; Overmeyer, Ludger; Giese, Ulrich (London : Hindawi, 2023)
    The additive manufacturing (AM) of elastomeric parts based on high-viscosity reinforced rubbers has increasingly become a topic of scientific research in recent years. In addition to the viscosity, which is several decades ...
  • Tailoring the V-Model for Optics: A Methodology for Optomechatronic Systems 
    Ley, Peer-Phillip; Wolf, Alexander; Lachmayer, Roland; Knöchelmann, Marvin (Basel : MDPI, 2022)
    The integration of optical technologies into once purely mechatronic systems enables innovative functions, but simultaneously increases the complexity of previous mechatronic system development. Therefore, a process has ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken