Auflistung Fakultät für Maschinenbau nach Autor/in "9acacde7-c7cf-4f5a-87fd-2018e746a754"

Auflistung Fakultät für Maschinenbau nach Autor/in "9acacde7-c7cf-4f5a-87fd-2018e746a754"

Sortiert nach: Sortierung: Ergebnisse:

  • Cooling of motor spindles - a review 
    Denkena, Berend; Bergmann, Benjamin; Klemme, Heinrich (London : Springer, 2020)
    Thermally induced loads in motor spindles can cause a number of undesired effects. As a result, the process capability of spindles, and thus, the productivity of a process can decrease. Future motor spindles will be exposed ...
  • Correction to: Approach for the monetary evaluation of process innovations in early innovation phases focusing on manufacturing and material costs 
    Demke, Tabea Marie; Emminghaus, Nicole; Overmeyer, Ludger; Kaierle, Stefan; Klose, Christian; Thürer, Susanne Elisabeth; Denkena, Berend; Bergmann, Benjamin; Schaper, Florian; Nyhuis, Peter; Kuprat, Vivian Katharina (Berlin ; Heidelberg : Springer, 2023)
    In the list of authors in this paper, Prof. Dr.-Ing. Kaierle is incorrectly assigned to the Institute of Production Systems and Logistics, Leibniz University Hannover, An der Universität 2, 30823, Garbsen, Germany (1). In ...
  • Correlation between process load and deep rolling induced residual stress profiles 
    Denkena, Berend; Grove, Thilo; Breidenstein, Bernd; Abrão, A.; Meyer, K. (Amsterdam : Elsevier B.V., 2018)
    Deep rolling is often used as a finishing step after cutting because of its beneficial influence on surface and subsurface properties, which lead to an increase in performance and lifecycle behavior. This manufacturing ...
  • Data mining approach for knowledge-based process planning 
    Denkena, Berend; Schmidt, Justin; Krüger,Max (Amsterdam : Elsevier, 2014)
    Concepts like gentelligent products, smart objects or cyber-physical systems have already proven a high potential especially for decentralized production planning and control. In this context, decentralized communication, ...
  • Deflection compensation on a force sensing mobile machine tool 
    Denkena, Berend; Bergmann, Benjamin; Wnendt, Eike; Brühne, Tilmann (Amsterdam [u.a.] : Elsevier, 2020)
    Within this paper, a model based deflection compensation for a mobile machine tool prototype is presented. The model compensates the deflection of the tool center point (TCP) based on strain gauge measurements at the ...
  • Design and Optimisation of an Electromagnetic Linear Guide for Ultra-Precision High Performance Cutting 
    Denkena, Berend; Dahlmann, Dominik; Krueger, R. (Amsterdam : Elsevier, 2016)
    Ultra-precision machining is rarely used in the production industry due to high costs as a consequence of disproportionally long primary and secondary processing times. In this context, the implementation of innovative ...
  • Design and optimization of a machining robot 
    Denkena, Berend; Bergmann, Benjamin; Lepper, Thomas (Amsterdam : Elsevier, 2017)
    For manufacturing of large parts made of lightweight materials like aluminum, fiber reinforced plastics or composites for example for the frame in aerospace or automotive industries more and more industrial robots are used. ...
  • Design of individual re-contouring processes 
    Böß, Volker; Rust, Felix; Denkena, Berend; Dittrich, Marc-André (Amsterdam : Elsevier, 2017)
    The re-contouring process of turbine blades is performed subsequently to the material deposit and restores the shape of the blade. Each process within the process chain has to be adapted to an individual repair case depending ...
  • Design of tool grinding processes for indexable inserts made of rocks 
    Wolters, Philipp; Breidenstein, Bernd; Denkena, Berend; Bergmann, Benjamin (London : Springer, 2022)
    Using natural rocks as alternative cutting tool material poses a possibility to meet actual environmental, economic and geopolitical challenges. The present state of knowledge, however, is not sufficient to allow a ...
  • Determination of Residual Stresses in Plate Material by Layer Removal with Machine-integrated Measurement 
    Dreier, Steven; Denkena, Berend (Amsterdam : Elsevier B.V., 2014)
    Structural aircraft components are usually manufactured from rolled plate material. Despite a stress relief treatment residual stress remains in the plates. This can result in distortions of the workpiece after the final ...
  • Development of a Flexible Multibody Model to Simulate Nonlinear Effects in Printing Process 
    Eckl, Martin; Lepper, Thomas; Denkena, Berend (Delaware : Scientific Research Publishing Inc., 2016)
    Modern high speed printing machines are able to print up to 700 m/min. At this rate, little excita-tions lead to vibrations, which may lead to loss of contact between the rollers (bouncing). This bouncing results in white ...
  • Development of a Multiple Degree of Freedom Knee Disarticulation Prosthesis with Active Leg Length Variation 
    Denkena, Berend; Eckl, Martin; Brouwer, Dominik (Delaware : Scientific Research Publishing Inc., 2014)
    This paper presents a novel design for a knee disarticulation prosthesis. In this design, three hydraulic cylinders form the supporting structure and provide the damping effect at the same time. That way the novel knee ...
  • Dexel-Based Simulation of Directed Energy Deposition Additive Manufacturing 
    Böß, Volker; Denkena, Berend; Dittrich, Marc-André; Malek, Talash; Friebe, Sven (Basel : MDPI, 2021)
    Additive manufacturing is typically a flexible alternative to conventional manufacturing processes. However, manufacturing costs increase due to the effort required to experimentally determine optimum process parameters ...
  • Direct Part Marking by Vibration Assisted Face Milling 
    Denkena, Berend; Grove, Thilo; Seibel, Alexander (Amsterdam : Elsevier, 2016)
    Critical or safety components have to be identified during maintenance especially if exposed to harsh conditions during the time of operation. Direct part marking (DPM) is a process to permanently mark parts with product ...
  • Dressing of hybrid-bonded graded diamond grinding wheels 
    Denkena, Berend; Bergmann, Benjamin; Raffalt, Daniel (Berlin, Heidelberg : Springer, 2022)
    For tool grinding, an optimization potential in terms of productivity is available using graded grinding wheels. This is especially the case when grinding flutes in cemented carbide. Due to the properties of the cemented ...
  • Dry Grinding by Means of Additively Manufactured Toric Grinding Pins 
    Keitel, Michael; Denkena, Berend; Bergmann, Benjamin (Berlin ; Heidelberg : Springer, 2023)
    The dry grinding process is challenging due to the induced thermal loads into the workpiece, which leads to a reduction of the workpiece quality. One approach to reduce the thermal loads is to adjust the grinding tool ...
  • Dynamic Bid Pricing for an Optimized Resource Utilization in Small and Medium Sized Enterprises 
    Denkena, Berend; Dittrich, Marc-André; Stamm, Siebo (Amsterdam : Elsevier B.V., 2018)
    Sales revenues of small and medium-sized enterprises are subject to seasonal fluctuation. This leads often to overloaded or underutilized manufacturing resources. Either way, this results in revenue losses. Therefore, ...
  • Editorial: System-Integrated Intelligence – Intelligent, Flexible and Connected Systems in Products and Production 
    Thoben, Klaus-Dieter; Denkena, Berend; Lang, Walter; Trächtler, Ansgar (Amsterdam [u.a.] : Elsevier, 2020)
    The editorial introduces the SysInt conference series and the motivation behind it. It describes the structures and content as well as the scientific and technological background of the SysInt 2020 conference held online ...
  • Effects on the deformation-induced martensitic transformation in AISI 304 in external longitudinal turning 
    Denkena, Berend; Breidenstein, Bernd; Dittrich, Marc-André; Nguyen, Hai Nam; Fricke, Lara Vivian; Maier, Hans Jürgen; Zaremba, David ([Amsterdam] : Elsevier ScienceDirect, 2021)
    During the turning process of metastable austenitic steels, austenite is transformed into hard martensite by plastic deformation at low temperatures. This enables the production of components, which have both a hardened ...
  • Electromagnetic levitation guide for use in ultra-precision milling centres 
    Denkena, Berend; Dahlmann, Dominik; Krueger, R. (Amsterdam : Elsevier, 2015)
    Today's machine tools for ultra-precision machining are generally characterised by low productivity. Above all, practical cutting parameters are limited due to uncontrollable disturbance forces. Therefore, it is necessary ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken