Auflistung Fakultät für Maschinenbau nach Publikationstyp

Auflistung Fakultät für Maschinenbau nach Publikationstyp

Sortiert nach: Sortierung: Ergebnisse:

  • Characterization of porous surfaces with spatial point pattern analysis 
    Zou, Yibo; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2015)
    Nowadays thermal plasma spray coating is widespread in automobile industry. For example, in the cylinder manufacturing process coatings are applied for friction reduction, wear and corrosion resistance. After the honing ...
  • Characterization of the monolithic fiber amplifier engineering prototype for the next generation of gravitational wave detectors 
    Wellmann, Felix; Steinke, Michael; Thies, Fabian; Bode, Nina; Oppermann, Patrick; Willke, Benno; Overmeyer, Ludger; Neumann, Jörg; Kracht, Dietmar (Bellingham, Wash. : SPIE, 2019)
    Single-frequency Yb3+ fiber amplifiers operating at 1064 nm are promising candidates to fulfill the challenging requirements for laser sources of the next generation of interferometric gravitational wave detectors. We ...
  • Cochlear shape description and analyzing via medial models 
    Gaa, Johannes; Kahrs, Lüder Alexander; Müller, Samuel; Majdani, Omid; Ortmaier, Tobias (Bellingham, Wash. : SPIE, 2015)
    Planning and analyzing of surgical interventions are often based on computer models derived from computed tomography images of the patient. In the field of cochlear implant insertion the modeling of several structures of ...
  • Combined Structural and Dimensional Synthesis of a Parallel Robot for Cryogenic Handling Tasks 
    Schappler, Moritz; Jahn, Philipp; Raatz, Annika; Ortmaier, Tobias (Cham : Springer Nature, 2022-01-01)
    The combined structural and dimensional synthesis is a tool for finding the robot structure that is suited best for a given task by means of global optimization. The handling task in cryogenic environments gives strong ...
  • Comparison of LASER and LED illumination for fiber optic fringe projection 
    Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2016)
    The inspection of functional elements is a crucial part of modern production cycles. However, with higher integration of production machinery and products, the accessibility for measurement systems is more and more limited. ...
  • Comparison of tablet-based strategies for incision planning in laser microsurgery 
    Schoob, Andreas; Lekon, Stefan; Kundrat, Dennis; Kahrs, Lüder Alexander; Mattos, Leonardo S.; Ortmaier, Tobias (Bellingham, Wash. : SPIE, 2015)
    Recent research has revealed that incision planning in laser surgery deploying stylus and tablet outperforms stateof-the-art micro-manipulator-based laser control. Providing more detailed quantitation regarding that approach, ...
  • Comparison of the Joining Zone Development of Hybrid Semi-Finished Products after Different Extrusion Processes 
    Piweck, Armin; Uhe, Johanna; Peddinghaus, Julius; Ross, Ingo; Behrens, Bernd-Arno (Ostrava : TANGER Ltd., 2022)
    The use of hybrid semi-finished products made of aluminium and steel enables the production of components with locally adapted properties, i.e. high strength and wear-resistance with reduced weight. In the scope of this ...
  • Compliant parallel robot with 6 DOF 
    Hesselbach, Jürgen; Raatz, Annika (Bellingham, Wash. : SPIE, 2001)
    In this paper a patented parallel structure1 will be presented in which conventional bearings are replaced by flexure hinges made of pseudo-elastic shape memory alloy. The robot has six degrees of freedom and was developed ...
  • Composite UHBR fan for forced response and flutter investigations 
    Eggers, Torben; Friedrichs, Jens; Goessling, Jan; Seume, Joerg R.; Natale, Nunzio; Flüh, Jan Peter; Paletta, Nicola (New York, N.Y. : The American Society of Mechanical Engineers, 2021)
    In the CA3ViAR (Composite fan Aerodynamic, Aeroelastic, and Aeroacoustic Validation Rig) project, a composite lowtransonic fan is designed and tested. The aim is a scaled ultrahigh bypass ratio (UHBR) fan with state-of-the-art ...
  • Concepts for integrating laser polishing into an additive manufacturing system 
    Leuteritz, Georg; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2019)
    With the introduction of Additive Manufacturing, many industrial sectors benefit from the freedom of design and capabilities of this technology. Components can be individually designed and extended with different functions. ...
  • Concepts of inhomogeneous illumination of area-based light modulators for high-resolution headlamps 
    Li, Yang; Knöchelmann, Marvin; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2019)
    Adaptive headlamps with innovative lighting functionalities can increase traffic safety. Subtractive light modulators such as Digital-Micromirror-Devices (DMD), liquid crystal displays (LCD) or liquid crystal on silicon ...
  • Control-relevant Model Selection for Multiple-Mass Systems 
    Tantau, Mathias; Jonsky, Torben; Ziaukas, Zygimantas; Jacob, Hans-Georg (Setúbal : SciTePress, 2022)
    Physically motivated parametric models are the basis of several techniques related to control design. Industrial model-based controller tuning methods include pole placement, symmetric optimum and damping optimum. The ...
  • Correlation between Geometric Component Properties and Physical Parameters of an Aerodynamic Feeding System 
    Kolditz, Torge; Wolf, Mirco; Raatz, Annika (Berlin : Springer Vieweg, 2020)
    In previous research, an aerodynamic feeding system was developed, which autonomously adapts to different components by using a genetic algorithm that controls the physical parameters of the system (e.g. angle of inclination, ...
  • Datenqualitätssicherung im Forschungsprozess am Beispiel von Zugversuchen 
    Müller, Laura; Wawer, Max Leo; Heimes, Norman; Uhe, Johanna; Koepler, Oliver; Auer, Sören; Lachmayer, Roland; Mozgova, Iryna (Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik (KTmfk) Erlangen e.V., 2023)
    Progressive digitization throughout the entire product data life cycle requires a more sensitive handling and understanding of data within engineering processes. Regarding engineering research data, the aim is to implement ...
  • Deep-learning-based 2.5D flow field estimation for maximum intensity projections of 4D optical coherence tomography 
    Laves, Max-Heinrich; Ihler, Sontje; Kahrs, Lüder A.; Ortmaier, Tobias (Bellingham, Wash. : SPIE, 2019)
    In microsurgery, lasers have emerged as precise tools for bone ablation. A challenge is automatic control of laser bone ablation with 4D optical coherence tomography (OCT). OCT as high resolution imaging modality provides ...
  • Design and Characterization of a 3D Printed Soft Pneumatic Actuator 
    Garcia Morales, Ditzia Susana; Ibrahim, Serhat; Cao, Benjamin-Hieu; Raatz, Annika (Cham : Springer, 2020)
    In soft robotics, the successful development of soft robots involves careful designing that can benefit from current technologies. The use of Finite Element Method (FEM) software and additive manufacturing is essential to ...
  • Design Automation Case Study : Modular Locating Fixture 
    Gembarski, Paul Christoph (Novi Sad : University of Novi Sad - Faculty of Technical Sciences, 2022)
    Design automation systems often mimic human designers and implement routine design activities. Beside this, the idea of such knowledge-based engineering is to support developers in the analysis and syntheses of complex ...
  • Design Automation Case Study: Trash Rack Cleaner 
    Gembarski, Paul Christoph; Institut für Produktentwicklung und Gerätebau, Leibniz Universität Hannover (Novi Sad : University of Novi Sad, 2020-09-23)
    Product configurators are a widely used tool to let customers specify an individual variant that best fits to their requirements. The basis for this is a product model that has well defined degrees of freedom and options ...
  • Design optimization of soft pneumatic actuators using genetic algorithms 
    Runge, Gundula; Peters, Jan; Raatz, Annika (Piscataway, NJ : IEEE, 2017)
    Recent trends in bioinspired robotic systems are paving the way for robots to become part of our daily lives. Soft robots, which are widely recognized as the next generation of human-friendly robots, are such a trend. Soft ...
  • Detektion von Konstruktionsfehlern durch eine automatisierte Objekterkennung mittels Deep Learning 
    Müller, Patrik; Gembarski, Paul Christoph; Lachmayer, Roland (Essen : Universität Duisburg-Essen, 2020)
    In der Produktentwicklung gelten diverse Richtlinien, an denen sich Ingenieure orientieren. Letztendlich sind aber die Erfahrungen des jeweiligen Anwenders dafür verantwortlich, ob eine Konstruktion korrekt gestaltet wird. ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken