Auflistung Fakultät für Maschinenbau nach Lizenz

Sortiert nach: Sortierung: Ergebnisse:

  • Elementary studies on the inducement and relaxation of residual stress 
    Denkena, Berend; Köhler, Jens; Breidenstein, Bernd; Mörke, Tobias (Amsterdam : Elsevier BV, 2011)
    In order to qualify residual stress relaxation as an indicator of mechanical overloading of machined parts, an individually designed residual stress profile has to be allocated. Even though numerous investigations have ...
  • Evolutionary Approach for an Optimized Analysis of Product Life Cycle Data 
    Lachmayer, Roland; Mozgova, Iryna; Sauthoff, Bastian; Gottwald, Philipp (Amsterdam : Elsevier, 2014)
    The application of life cycle data of smart products offers new opportunities for the product development process. Nowadays, products often consist of adaptive design variants of an existing product. Taking this into ...
  • Experimental Analysis of Cutting Forces in Actuated Face Milling of Micro Patterns 
    Denkena, Berend; Köhler, Jens; Seibel, Alexander (Amsterdam : Elsevier, 2014)
    This article presents an experimental analysis on cutting forces in fast tool servo-based face milling of micro structures. These structures can be used as a binary information carrier [1]. For a proper process design on ...
  • Flexible Magnetic Writing / Reading System: Polyimide Film as Flexible Substrate 
    Taptimthong, Piriya; Rittinger, J.; Wurz, Marc Christopher; Rissing, Lutz (Amsterdam : Elsevier, 2014)
    In the frame work of Collaborative Research Center (CRC) 653, magnetic data storage on surfaces of components has been developed. The principle is based on magnetic data storage of hard disk drives. Rigid magnetic writing ...
  • Flexographic and Inkjet Printing of Polymer Optical Waveguides for Fully Integrated Sensor Systems 
    Wolfer, Tim; Bollgruen, Patrick; Mager, Dario; Overmeyer, Ludger; Korvink, Jan G. (Amsterdam : Elsevier, 2014)
    Planar optronic sensor systems are networks of integrated light sources, detectors and sensors, connected by optical waveguides on thin polymer films. This way, sensor networks can be realized completely optically for ...
  • Foil-integrated 2D optical strain sensors 
    Kelb, Christian; Reithmeier, Eduard; Roth, Bernhard (Amsterdam : Elsevier, 2014)
    We present two novel approaches to 2D optical strain sensing in thin polymer foils that allow for mass-production by MEMS production techniques. The sensor principles are based on purely optical methods: the sensitive ...
  • Form-flexible handling and joining technology (formhand) for the forming and assembly of limp materials 
    Löchte, Christian; Kunz, Holger; Schnurr, Raphael; Langhorst, Sören; Dietrich, Franz; Raatz, Annika; Dilger, Klaus; Dröder, Klaus (Amsterdam : Elsevier, 2014)
    The assembly of limp, elastic or differently shaped objects poses a huge challenge which needs to be met by machine tools and the corresponding processes of handling, forming and joining. These processes are often carried ...
  • Forming sheets of metal and fibre-reinforced plastics to hybrid parts in one deep drawing process 
    Behrens, Bernd-Arno; Hübner, Sven; Neumann, André (Amsterdam : Elsevier, 2014)
    Each material has its own advantages and disadvantages in terms of its mechanical, chemical and physical properties. Metallic materials are comparatively ductile and easy to process. Fibre reinforced plastics are very stiff ...
  • Forward variance planning and modeling of multi-variant products 
    Gembarski, Paul Christoph; Lachmayer, Roland (Amsterdam : Elsevier, 2014)
    Planning multi-variant products in the early stage of the design process is still a challenge. In the present paper, a specification technique is introduced in order to define multi-variant products using degrees of freedom ...
  • Grinding of Iron-aluminides 
    Köhler, Jens; Moral, Analía; Denkena, Berend (Amsterdam [u.a.] : Elsevier, 2013)
    Since the 1930s iron-aluminides are investigated due to their excellent corrosion resistance, low density and high specific strength. However, little work has been carried out on the machining of these alloys since then. ...
  • High-performance cutting of micro patterns 
    Köhler, Jens; Mörke, Tobias; Gümmer, Olaf; Denkena, Berend (Amsterdam : Elsevier BV, 2012)
    This research report presents an innovative piezo-actuated fast tool servo (FTS) for milling operations introducing the highperformance cutting of micro patterns. The outstanding dynamics of the tool enable a highly dynamic ...
  • Hot Embossing of Polymer Optical Waveguides for Sensing Applications 
    Rezem, Maher; Günther, Axel; Rahlves, Maik; Roth, Bernd; Reithmeier, Eduard (Amsterdam : Elsevier, 2014)
    Micro-optical sensors integrated into polymer foils hold great promise for a wide range of applications. One major challenge to date is the reliable, large-scale and cost-effective manufacturing of the required waveguide ...
  • Hot stamping of load adjusted structural parts 
    Behrens, Bernd-Arno; Bouguecha, Anas; Gaebel, Christoph Michael; Moritz, Jörn; Schrödter, Jens (Amsterdam : Elsevier, 2014)
    The importance of high-strength steel concepts for car bodies has increased in recent years due to the necessity of weight reduction and improved crash safety. By using hot stamping or also known as press hardening of boron ...
  • In-line production, optronic assembly and packaging of POFs 
    Hachicha, Bernd; Overmeyer, Ludger (Amsterdam : Elsevier, 2014)
    The importance of optical technology as a key technology is constantly increasing. In application areas, where the conventional use of electrical solutions for signal generation, signal transmission or signal reception is ...
  • The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel 
    Abrão, A.M.; Denkena, Berend; Köhler, Jens; Breidenstein, Bernd; Mörke, Tobias (Amsterdam : Elsevier, 2014)
    The aim of this work is to study the influence of selected deep rolling parameters (rolling pressure and number of passes) on the surface integrity of fully annealed AISI 1060 high carbon steel. In addition to the mechanical ...
  • Influence of stress on the degradation behavior of Mg LAE442 implant systems 
    Denkena, Berend; Köhler, Jens; Stieghorst, J.; Turger, Anke; Seitz, J.; Fau, D.R.; Wolters, L.; Angrisani, Nina; Reifenrath, Janin; Helmecke, Patrick (Amsterdam : Elsevier, 2013)
    In this paper the performance of a magnesium based implant system is analyzed. A special emphasis is placed on the impact of stress on the corrosion behavior of the magnesium alloy. An implant system containing a plate and ...
  • Influence of the Honed Cutting Edge on Tool Wear and Surface Integrity in Slot Milling of 42CrMo4 Steel 
    Denkena, Berend; Koehler, Jens; Rehe, Michael (Amsterdam [u.a.] : Elsevier, 2012)
    The cutting edge microgeometry has a significant influence on the wear behavior of cutting tools and therefore on the machining performance. To investigate the effect of tailored cutting edge microgeometries, a detailed ...
  • Innovative drive concept for machining robots 
    Denkena, Berend; Litwinski, K.; Schönherr, M. (Amsterdam : Elsevier, 2013)
    In this paper an innovative drive concept for robots to improve their machining capability is presented. As a test bed a two-axis robot is designed and equipped with torque motors with load-sided high resolution encoders ...
  • Investigations on Strain Behaviour of Polymer Substrates During a Separation Process 
    Jogschies, L.; Heitmann, J.; Klaas, D.; Rissing, L. (Amsterdam : Elsevier, 2014)
    Magnetic field sensors are used for contact free position detection of machine components for example. Fabricating these sensors on a flexible substrate enables the user to attach the sensor on various surfaces and different ...
  • Kinematic and stochastic surface topography of machined tial6v4-parts by means of ball nose end milling 
    Denkena, Berend; Böß, Volker; Nespor, D.; Samp, A. (Amsterdam : Elsevier BV, 2011)
    Ball nose end mills are usually applied during 5-axes machining of high functional parts especially in the aerospace industry. The systematical study of the relationship between process forces and kinematics, surface ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken