Auflistung Fakultät für Maschinenbau nach Autor/in "ed62d0fa-2e27-40b5-8b00-dca146cdeb68"

Auflistung Fakultät für Maschinenbau nach Autor/in "ed62d0fa-2e27-40b5-8b00-dca146cdeb68"

Sortiert nach: Sortierung: Ergebnisse:

  • Additive manufacturing of multi-material parts – Design guidelines for manufacturing of 316L/CuCrZr in laser powder bed fusion 
    Meyer, Ina; Oel, Marcus; Ehlers, Tobias; Lachmayer, Roland (London [u.a.] : Elsevier, 2023)
    Additive manufacturing (AM) can be used to produce multi-material parts in which the material can be varied voxel-wise in all three spatial directions. This means that the paradigm of the homogeneous material can be abandoned ...
  • Additive manufacturing of reflective optics: Evaluating finishing methods 
    Leuteritz, Georg; Lachmayer, Roland (Bellingham, WA : SPIE - International Society for Optical Engineering, 2018)
    Individually shaped light distributions become more and more important in lighting technologies and thus the importance of additively manufactured reflectors increases significantly. The vast field of applications ranges ...
  • Additive refurbishment of a vibration-loaded structural component 
    Ganter, Nicola Viktoria; Ehlers, Tobias; Gembarski, Paul Christoph; Lachmayer, Roland (Cambridge : Cambridge University Press, 2021)
    In the event of damage to additively manufactured components whose shape cannot be produced by machining, an additive repair can potentially be not only ecologically but also ecologically more favorable than the production ...
  • Aktiver Scheinwerfer mit DMD-Technologie zur Erzeugung vollständiger Lichtverteilungen 
    Knöchelmann, Marvin; Wolf, Alexander; Kloppenburg, Gerolf; Lachmayer, Roland (Düsseldorf : VDI Verlag GmbH, 2018-06-05)
    In diesem Beitrag wird der Prototyp eines aktiven Scheinwerfers vorgestellt, der durch den Einsatz eines Mikrospiegelarrays (DMD) hochaufgelöste Lichtverteilungen generieren kann. Mit der eingesetzten verzeichnenden ...
  • An approach for choosing the cost effective design for a product-service system while maintaining its desired reliability 
    Schneider, Jannik Alexander; Mozgova, Iryna; Lachmayer, Roland (Cambridge : Cambridge University Press, 2019)
    With the spread of product-service systems as business models the life cycle costs are of increasing importance as a measurement of product cost. A key factor that drives these costs is the desired reliability of the ...
  • Analysis of LED arrangement in an array with respect to lens geometry 
    Ley, Peer-Phillip; Held, Marcel Philipp; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2018)
    Highly adaptive light sources such as LED arrays have been surpassing conventional light sources (halogen, xenon) for automotive applications. Individual LED arrangements within the array, high durability and low energy ...
  • Anforderungen an die Ausleuchtung von Lichtmodulatoren 
    Held, Marcel Philipp; Ley, Peer-Phillip; Wolf, Alexander; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-18)
    Hochaufgelöste Beleuchtungssysteme erfordern für einen effizienten und lichtstarken Betrieb eine möglichst exakte Ausleuchtung der lichtmodulierenden Fläche. In diesem Paper werden relevante Technologien gegenübergestellt ...
  • Anisotropic characteristics analysis of 3D-printed optics 
    Grabe, Tobias; Biermann, Tobias; Bayerl, Maximilian; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2020)
    The Additive Manufacturing of transparent materials enables cost efficient rapidprototyping of optically transparent components. The components are built layer-by-layer which can cause anisotropic optical properties. We ...
  • Application of system dynamics for holistic product-service system development 
    Kloock-Schreiber, Daniel; Gembarski, Paul Christoph; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier, 2020)
    In order to develop Product Service Systems (PSS), a holistic view on the system and a coequal development of service and product parts is necessary. Particularly for the beginning of the development of PSS, existing ...
  • Application-inspired additive manufacturing of Raman optics 
    Grabe, Tobias; Biermann, Tobias; Wolf, Alexander; Al-Nuwaider, Jassim; Krauss, Henrik; August, Jannes; Yu, Weijia; Heinz, Jannis Ben; Bayerl, Maximilian; Xu, Ke; Wang, Qiang; Wu, Junjun; Roth, Bernhard; Ren, Wei; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier Science, 2023)
    While additive manufacturing (AM) enables the production of versatile optical components, the limited knowledge of manufacturing processes makes the development of accurate simulation tools and evaluation criteria challenging. ...
  • An Approach to describe Gentelligent Components in their Life Cycle 
    Lachmayer, Roland; Mozgova, Iryna; Scheidle, Wieben (Amsterdam : Elsevier, 2016)
    Information about products and their life cycle are often required for the product development and manufacturing process. So the application of life cycle data of smart products offers new opportunities to pass information ...
  • Calculation comparison of an additive and subtractive light modulator for high-resolution pixellight headlamps 
    Held, Marcel Philipp; Ley, Peer-Phillip; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2018)
    High-resolution vehicle headlamps represent a future-oriented technology that increases traffic safety and driving comfort in the dark. A further development to current matrix beam headlamps are LED-based pixellight systems ...
  • A case study for a unified designation of development information in a PDM System for Technical Inheritance 
    Scheidel, Wieben; Mozgova, Iryna; Lachmayer, Roland (Amsterdam : Elsevier B.V., 2018)
    Industry 4.0 is the next step to autonomous products, productions and processes, which have the ability to collect information about themselves and their environment and to communicate with each other. The information about ...
  • Comparison of Additive Manufacturing techniques regarding mechanical and optical properties 
    Leuteritz, Georg; Lippert, René Bastian; Rettschlag, Katharina; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2018-07-20)
    This article examines whether optical and mechanical components can be additively manufactured with net shape properties. Furthermore various Additive Manufacturing techniques are investigated regarding the suitability for ...
  • Concept for the Implementation of a Scaling Strategy into the Paradigm of Technical Inheritance 
    Wolniak, Philipp; Mozgova, Iryna; Lachmayer, Roland (Amsterdam : Elsevier B.V., 2018)
    A concept for the implementation of a scaling strategy into the paradigm of Technical Inheritance is proposed. The paradigm of Technical Inheritance allows monitoring the manufacturing and usage of a component, to analyse ...
  • The Concept of Technical Inheritance in Operation: Analysis of the Information Flow in the Life Cycle of Smart Products 
    Demminger, Christian; Mozgova, Iryna; Quirico, Melissa; Uhlich, Florian; Denkena, Berend; Lachmayer, Roland; Nyhuis, Peter (Amsterdam : Elsevier, 2016)
    Industry 4.0 opens great potentials in productions technologies by establishing communication between machines and equipment as well as processes along the life cycle of products. Within the Collaborative Research Center ...
  • Concepts for integrating laser polishing into an additive manufacturing system 
    Leuteritz, Georg; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2019)
    With the introduction of Additive Manufacturing, many industrial sectors benefit from the freedom of design and capabilities of this technology. Components can be individually designed and extended with different functions. ...
  • Concepts of inhomogeneous illumination of area-based light modulators for high-resolution headlamps 
    Li, Yang; Knöchelmann, Marvin; Lachmayer, Roland (Bellingham, Wash. : SPIE, 2019)
    Adaptive headlamps with innovative lighting functionalities can increase traffic safety. Subtractive light modulators such as Digital-Micromirror-Devices (DMD), liquid crystal displays (LCD) or liquid crystal on silicon ...
  • Creation of a Knowledge Space by Semantically Linking Data Repository and Knowledge Management System - a Use Case from Production Engineering 
    Sheveleva, Tatyana; Wawer, Max Leo; Oladazimi, Pooya; Koepler, Oliver; Nürnberger, Florian; Lachmayer, Roland; Auer, Sören; Mozgova, Iryna (Frankfurt ; München [u.a.] : Elsevier, 2022)
    The seamless documentation of research data flows from generation, processing, analysis, publication, and reuse is of utmost importance when dealing with large amounts of data. Semantic linking of process documentation and ...
  • Datenqualitätssicherung im Forschungsprozess am Beispiel von Zugversuchen 
    Müller, Laura; Wawer, Max Leo; Heimes, Norman; Uhe, Johanna; Koepler, Oliver; Auer, Sören; Lachmayer, Roland; Mozgova, Iryna (Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik (KTmfk) Erlangen e.V., 2023)
    Progressive digitization throughout the entire product data life cycle requires a more sensitive handling and understanding of data within engineering processes. Regarding engineering research data, the aim is to implement ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken