Auflistung Fakultät für Maschinenbau nach Autor/in "d5d430b0-6ce6-4561-8c53-b6801d623280"

Auflistung Fakultät für Maschinenbau nach Autor/in "d5d430b0-6ce6-4561-8c53-b6801d623280"

Sortiert nach: Sortierung: Ergebnisse:

  • Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries 
    Behrens, Bernd-Arno; Raatz, Annika; Hübner, Sven; Bonk, Christian; Bohne, Florian; Bruns, Christian; Micke-Camuz, Moritz (Amsterdam : Elsevier, 2017)
    This research describes the development of a fully automated forming process of continuous FRP to assemble a down scaled battery tray for a plug-in-hybrid automobile. The paper presents the results of forming experiments ...
  • Combined deep drawing and fusion bonding of structural FRP-metal hybrid parts 
    Bernd-Arno, Behrens; Dilger, Klaus; Lippky, Kristian; Kaempf, Lukas; Hübner, Sven; Hartwig, Sven; Altun, Yunus; Gabriel, Max; Farahmand, Ehsan; Micke-Camuz, Moritz (Amsterdam [u.a.] : Elsevier, 2019)
    This research describes the development of a combined process of forming and thermal joining without adhesives of high strength steels and organosheets. In order to achieve cycle times below 20 s the temperature of the ...
  • Development of a Combined Process of Organic Sheet forming and GMT Compression Molding 
    Behrens, Bernd-Arno; Hübner, Sven; Bonk, Christian; Bohne, Florian; Micke-Camuz, Moritz (Amsterdam : Elsevier, 2017)
    This research describes the development of a combined one-step process of complex organic sheet forming and GMT (Glass Mat Thermoplastics) compression molding which can be integrated in processes using conventional stamping ...
  • Development of polygon forming processes for aerospace engineering 
    Müller, Philipp; Behrens, Bernd-Arno; Hübner, Sven; Jepkens, Jan; Wester, Hendrik; Lautenbach, Sven (Millersville, PA : Materials Research Forum LLC, 2023)
    The focus of this research lays on the further development of the Polygon Forming Technology, which is already successfully used for cold forming components in the aerospace industry. One example is the fuselage shell of ...
  • Evaluating material failure of AHSS using acoustic emission analysis 
    Stockburger, Eugen; Vogt, Hendrik; Wester, Hendrik; Hübner, Sven; Behrens, Bernd-Arno (Millersville, PA : Materials Research Forum LLC, 2023)
    Driven by high energy prices and strict legal requirements on CO2 emissions, high-strength sheet steel materials are increasingly gaining importance in the automotive industry regarding electric vehicles and their battery ...
  • FEA-based optimisation of a clinching process with an open multiple-part die aimed at damage minimisation in CR240BH-AlSi10MnMg joints 
    Behrens, Bernd-Arno; Bouguecha, Anas; Vucetic, Milan; Hübner, Sven; Yilkiran, Deniz; Jin, Yilin; Peshekhodov, Ilya (Les Ulis : EDP Sciences, 2015)
    The paper presents results of a FEA-based tool design optimisation for a clinching process with an open multiple-part die. The studied materials are the bake-hardening steel CR240BH (1.5 mm) on the punch side and the ...
  • Forming and Joining of Carbon-Fiber-Reinforced Thermoplastics and Sheet Metal in One Step 
    Behrens, Bernd-Arno; Hübner, Sven; Grbic, Nenad; Micke-Camuz, Moritz; Wehrhane, Tim; Neumann, André (London : Elsevier Ltd., 2017)
    The processing and component properties of metals have led to their worldwide success in mechanical engineering. Their advantages are high ductility, efficient production methods, good joining ability and nearly isotropic ...
  • Forming sheets of metal and fibre-reinforced plastics to hybrid parts in one deep drawing process 
    Behrens, Bernd-Arno; Hübner, Sven; Neumann, André (Amsterdam : Elsevier, 2014)
    Each material has its own advantages and disadvantages in terms of its mechanical, chemical and physical properties. Metallic materials are comparatively ductile and easy to process. Fibre reinforced plastics are very stiff ...
  • Forming-induced Gloss Reduction of Coil Coated Sheets for White Goods 
    Behrens, Bernd-Arno; Hübner, Sven; Gaebel, Christoph Michael (London : Elsevier Ltd., 2017)
    In the household appliance industry piecework coating of body components has been successively substituted by usage of coil-coated sheets. For components with low strains or components not visible for the customer and ...
  • Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming 
    Hinz, Lennart; Metzner, Sebastian; Müller, Philipp; Schulte, Robert; Besserer, Hans-Bernward; Wackenrohr, Steffen; Sauer, Christopher; Kästner, Markus; Hausotte, Tino; Hübner, Sven; Nürnberger, Florian; Schleich, Benjamin; Behrens, Bernd-Arno; Wartzack, Sandro; Merklein, Marion; Reithmeier, Eduard (Basel : MDPI, 2021)
    Fringe projection profilometry in combination with other optical measuring technologies has established itself over the last decades as an essential complement to conventional, tactile measuring devices. The non-contact, ...
  • Further development of wear calculation and wear reduction in cold forging processes 
    Behrens, Bernd-Arno; Brunotte, Kai; Hübner, Sven; Wester, Hendrik; Müller, Felix; Müller, Philipp; Wälder, Jonas; Matthias, Tim (Basel : MDPI, 2021)
    Tools are of strategic importance for industrial manufacturing processes. Their behaviour has a great influence on the productivity of the process and the quality of the product. A material saving and efficient technique ...
  • Investigation of masking concepts for influencing the austenitization process during press hardening 
    Behrens, Bernd-Arno; Hübner, Sven; Chugreev, Alexander; Bohne, Florian; Seel, Andreas; Jalanesh, Masood; Wölki, Kai (Amsterdam : Elsevier B.V., 2018)
    One possibility to adjust tailored properties in hot stamping is the application of a masking concept to prevent a complete austenitization. In this study different concepts were investigated in order to use them as a ...
  • Investigation of the influence of an oscillation superposition on the wear behaviour in an industrial-like process 
    Behrens, Bernd-Arno; Wester, Hendrik; Matthias, Tim; Hübner, Sven; Wälder, Jonas; Müller, Philipp (Amsterdam [u.a.] : Elsevier, 2020)
    In cold forging processes as well as in sheet-bulk metal forming, vast contact stresses result in severe tool wear and thus in tool failures. In order to achieve a sustainable production, a new manufacturing process is ...
  • Local Heat Treatment in Draw Bending for Profiles of Manganese Boron Steel 22MnB5 
    Behrens, Bernd-Arno; Bonk, Christian; Hübner, Sven; Uhe, Johanna; Klie, Roman; Moritz, Jörn (London : Elsevier Ltd., 2017)
    Due to the increasing demand for vehicles with a low fuel consumption and consequently low emissions, lightweight construction is an important task in the automotive industry. High-strength profile parts reduce the total ...
  • Numerical and experimental investigation of GMT compression molding and fiber displacement of UD-tape inserts 
    Behrens, Bernd-Arno; Bohne, Florian; Lorenz, Ralf; Arndt, Hendrik; Hübner, Sven; Micke-Camuz, Moritz (Amsterdam [u.a.] : Elsevier, 2020)
    This publication deals with finite element based modelling and the experimental validation of the flow characteristics of glass mat reinforced thermoplastic composite (GMT). Furthermore, the interaction of GMT and UD-Tape ...
  • Process-Integrated Lubrication in Sheet Metal Forming 
    Lachmayer, Roland; Behrens, Bernd-Arno; Ehlers, Tobias; Müller, Philipp; Althaus, Philipp; Oel, Marcus; Farahmand, Ehsan; Gembarski, Paul Christoph; Wester, Hendrik; Hübner, Sven (Basel : MDPI, 2022)
    The deep-drawability of a sheet metal blank is strongly influenced by the tribological conditions prevailing in a deep-drawing process. Therefore, new methods to influence the tribology represent an important research ...
  • Resistance Heating by Means of Direct Current for Resource-Saving CO2-Neutral Hot Stamping 
    Behrens, Bernd Arno; Hübner, Sven; Albracht, Lorenz; Farahmand, Ehsan (Baech : Trans Tech Publications Ltd., 2022)
    Hot stamping is a well-established and frequently used manufacturing process in automotive body construction. The number of components manufactured in this way is continuously increasing. Hot stamping is used to produce ...
  • Simulation and Validation of an Incremental Bending Process for Cylindrical Fuselage Components 
    Jepkens, Jan; Müller, Philipp; Wester, Hendrik; Hübner, Sven; Wehrmann, Simon; Behrens, Bernd-Arno (Basel : MDPI, 2023)
    In the aviation industry, a large number of processes are not digitalised. Simultaneously, many special processes are used in production, such as incremental bending. In order to model and efficiently design multi-stage ...
  • Tailoring Soft Local Zones in Quenched Blanks of the Steel 22MnB5 by Partial Pre-cooling with Compressed Air 
    Golovko, Oleksandr; Stolte, Max-Henry; Wölki, Kai; Hübner, Sven; Behrens, Bernd-Arno; Maier, Hans Jürgen; Nürnberger, Florian (New York, NY : Springer, 2020)
    The high-strength boron steel 22MnB5 steel is widely used for automotive lightweight constructions. A novel approach is promising to tailor strength and ductility in the hardened condition using locally pre-tempered sheets ...
  • Wear Behavior of MoS2 Lubricant Layers during Sheet Metal Forming 
    Behrens, Bernd-Arno; Maier, Hans Jürgen; Hübner, Sven; Bonk, Christian; Almohallami, Amer; Lummer, Christin; Schein, Patrick; Scheland, Hannes; Micke-Camuz, Moritz (London : Elsevier Ltd., 2017)
    The increased use of high and ultra-high strength steel and materials with a high adhesion tendency leads to higher demands regarding the wear resistance of forming tools. A promising approach addressing both challenges ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken