The effect of metal inert gas welding on the microstructure, abnormal grain growth and the pseudoelastic properties of industrially processed Fe–Mn–Al–Ni shape memory alloy sheets were studied. Square-butt welds were ...

Dissimilar metal welds (DMW) combine the high strength and cost benefits of ferritic stainless steels with the high corrosion resistance of austenitic steels, and are thus commonly used in different types of power plants. ...

Currently, wire and arc additive manufacturing (WAAM) is mainly done by planning the torch movements layer wise. The height step between the layers is derived from preliminary experiments. Small deviation in the determination ...

Hydrogen-induced cold cracking is a huge challenge in underwater wet welding. In the present study, the influence of water depth on the diffusible and residually stored hydrogen content is investigated for the case of ...

In the present study, the damage mechanisms that cause premature failure of sapphire water jet orifices were analyzed using a combined experimental and finite element modeling (FEM) approach. Depending on the operating ...

Hydrogen-assisted cracking is a major challenge in underwater wet welding of high-strength steels with a carbon equivalent larger than 0.4 wt%. In dry welding processes, post-weld heat treatment can reduce the hardness in ...

The aim of this research was the experimental investigation of the influence of the gap width and speed of the welding wire on the changes of the geometry in the welded joint in the hybrid laser-arc welding of shipbuilding ...

The Collaborative Research Centre 1153 (CRC 1153) "Process chain for the production of hybrid high-performance components through tailored forming" aims to develop new process chains for the production of hybrid bulk ...

Additive manufacturing with multi-material design offers great possibilities for lightweight and function-integrated components. A process chain was developed in which hybrid steel–steel-components with high fatigue strength ...

In the present study, tungsten inert gas wire and arc additive manufacturing was used to process an iron-based FeMnAlNi shape memory alloy. By a layer-by-layer method, a wall structure with a length of 60 mm and a height ...