Auflistung Fakultät für Maschinenbau nach Autor/in "97f2f94a-3641-41bf-ac7d-a6d75c6d6809"

Auflistung Fakultät für Maschinenbau nach Autor/in "97f2f94a-3641-41bf-ac7d-a6d75c6d6809"

Sortiert nach: Sortierung: Ergebnisse:

  • Gas Phase Reaction of Silane with Water at Different Temperatures and Supported by Plasma 
    Szafarska, Maik; Olszok, Vinzent; Holländer, Ulrich; Gustus, René; Weber, Alfred P.; Maus-Friedrichs, Wolfgang (Washington, DC : ACS Publications, 2023)
    The interaction of silane and water is discussed controversially in literature: some authors suggest monosilane and water react kinetically and sufficiently fast enough to remove water, while others state the reaction ...
  • Influence of an oxygen-free atmosphere on laser beam brazing of aluminium with prior surface deoxidation by pulsed laser radiation 
    Aman, Witali; Nothdurft, Sarah; Hermsdorf, Jörg; Kaierle, Stefan; Szafarska, Maik; Gustus, René; Maus-Friedrichs, Wolfgang; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2022)
    Aluminium alloys, like AlMgSi1 and AlMg3, cannot be joined in industrial processes by laser beam brazing without the use of fluxes due to their resistant oxide layer. The aim of this study is to dispense with the use of ...
  • Oxide Free Wire Arc Sprayed Coatings—An Avenue to Enhanced Adhesive Tensile Strength 
    Rodriguez Diaz, Manuel; Szafarska, Maik; Gustus, René; Möhwald, Kai; Maier, Hans Jürgen (Basel : MDPI, 2022)
    Conventionally, thermal spraying processes are almost exclusively carried out in an air atmosphere. This results in oxidation of the particles upon thermal spraying, and thus, the interfaces of the splats within the coating ...
  • Oxygen-Free Production—From Vision to Application 
    Wegewitz, Lienhard; Maus-Friedrichs, Wolfgang; Gustus, René; Maier, Hans Jürgen; Herbst, Sebastian (Weinheim : Wiley-VCH Verl., 2023)
    As oxygen negatively affects most production processes in the metalworking industry, a truly oxygen-free production environment appears attractive in terms of the resulting material and component properties. This overview ...
  • Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere 
    Behrens, Bernd-Arno; Brunotte, Kai; Peddinghaus, Julius; Ursinus, Jonathan; Döring, Sebastian; Maus-Friedrichs, Wolfgang; Gustus, René; Szafarska, Maik (Basel : MDPI, 2023)
    Due to the high specific surface area of titanium aluminide powders, significant and unavoidable surface oxidation takes place during processing. The resulting oxides disrupt the conventional powder metallurgical process ...
  • Towards dry machining of titanium-based alloys : A new approach using an oxygen-free environment 
    Maier, Hans Jürgen; Herbst, Sebastian; Denkena, Berend; Dittrich, Marc-André; Schaper, Florian; Worpenberg, Sebastian; Gustus, René; Maus-Friedrichs, Wolfgang (Basel : MDPI AG, 2020)
    In the current study, the potential of dry machining of the titanium alloy Ti-6Al-4V with uncoated tungsten carbide solid endmills was explored. It is demonstrated that tribo-oxidation is the dominant wear mechanism, which ...
  • Young’s Modulus and Residual Stresses of Oxide-Free Wire Arc Sprayed Copper Coatings 
    Rodriguez Diaz, Manuel; Raumel, Selina; Wurz, Marc Christopher; Szafarska, Maik; Gustus, René; Möhwald, Kai; Maier, Hans Jürgen (Basel : MDPI, 2022)
    Conventional thermal spraying processes are almost exclusively carried out in an air atmosphere, resulting in the oxidation of the particle surfaces and interfaces within the coating and between the substrate and coating. ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken