Auflistung Fakultät für Maschinenbau nach Autor/in "62d7a88c-1ead-4109-b14d-aefee044e6ca"

Auflistung Fakultät für Maschinenbau nach Autor/in "62d7a88c-1ead-4109-b14d-aefee044e6ca"

Sortiert nach: Sortierung: Ergebnisse:

  • Formability of 7000 aluminum alloys in warm and hot forming condition 
    Behrens, Bernd-Arno; Hübner, S.; Vogt, H. (Bristol : Institute of Physics Publishing, 2018)
    In recent years, the automobile industry has been calling for new lightweight solutions to fulfill increasing ecologically requirements. A weight reduction of automobile body constructions is necessary to reduce fuel ...
  • Influence of process parameters on the hot stamping of carbon-martensitic chromium steel sheets 
    Behrens, Bernd-Arno; Hübner, S.; Sunderkötter, C.; Gebel, L.; Gnaß, S.; Berndt, G.; Trimborn, C.; Pfeffer, C. (Bristol : Institute of Physics Publishing, 2018)
    Hot-stamped components are an important part in steel-intensive automobile lightweight design in which the use of the heat-treatable steel 22MnB5 has been established. However, the field of application is limited by the ...
  • Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm forming 
    Behrens, Bernd-Arno; Nürnberger, F.; Bonk, Christian; Hübner, S.; Behrens, S.; Vogt, H. (Bristol : Institute of Physics Publishing, 2017)
    Aluminum alloys of the 7000 series possess high lightweight potential due to their high specific tensile strength combined with a good ultimate elongation. For this reason, hot-formed boron-manganese-steel parts can be ...
  • Mechanical properties and formability of en AW-7075 in cold forming processes 
    Behrens, B.-A.; Hübner, S.; Vogt, H.; Golovko, O.; Behrens, S.; Nürnberger, F. (London [u.a.] : Institute of Physics, 2020)
    Due to a low density and high tensile strength, the aluminum alloy EN AW 7075 T6 offers a high lightweight potential for structural components. Since its formability is limited at room temperature in the T6 temper state, ...
  • Press Hardening of Tubes with Additional Interior Spray Cooling 
    Behrens, Bernd-Arno; Maier, H.J.; Neumann, A.; Moritz, J.; Hübner, S.; Gretzki, T.; Nürnberger, F.; Spiekermeier, A. (2015)
    Press-hardened profiles are used e.g. for automotive applications in order to improve light weight construction due to the high reachable strength. The application of interior water-air spray cooling contributes to ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken