Auflistung Fakultät für Maschinenbau nach Dewey Decimal Classification

Auflistung Fakultät für Maschinenbau nach Dewey Decimal Classification

Sortiert nach: Sortierung: Ergebnisse:

  • A 3D measuring endoscope for hand-guided operation 
    Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard (London : IOP, 2018-08-01)
    Optical measuring devices are widely used in industrial production and maintenance processes. With increasing integration, the accessibility of functional elements inside machines is limited for measuring devices. In order ...
  • A multiscale study of hot-extruded CoNiGa ferromagnetic shape-memory alloys 
    Samothrakitis, Stavros; Buhl Larsen, Camilla; Woracek, Robin; Heller, Luděk; Kopeček, Jaromír; Gerstein, Gregory; Maier, Hans Jürgen; Rameš, Michal; Tovar, Michael; Šittner, Petr; Schmidt, Søren; Strobl, Markus (Amsterdam [u.a.] : Elsevier Science, 2020)
    Ferromagnetic shape-memory CoNiGa alloys have attracted much scientific interest due to their potential alternative use as high-temperature shape-memory alloys, bearing a high prospect for actuation and damping applications ...
  • A vibration control for disassembly of turbine blades 
    Mullo, Santiago D.; Pruna, Edwin; Wolff, Julius; Raatz, Annika (Amsterdam : Elsevier B.V., 2019)
    Typically, disassembly forces are unknown due to high forces or high temperatures during product operation, where assembly connections solidify. For the regulation of disassembly forces a controller is developed. The ...
  • Ablation and functionalization of flexographic printing forms using femtosecond lasers for additively manufactured polymer-optical waveguides 
    Wienke, A.; Hoffmann, G.-A.; Koch, J.; Jäschke, P.; Overmeyer, Ludger; Kaierle, Stefan (Amsterdam : Elsevier B.V., 2020)
    An efficient and low-cost approach to manufacture Opto-Mechatronic Interconnect Devices will be obligatory to handle the strongly increasing amount of data. The presented approach is based on a flexographic printing process. ...
  • Abrasion monitoring and automatic chatter detection in cylindrical plunge grinding 
    Ahrens, M.; Fischer, R.; Dagen, M.; Denkena, Berend; Ortmaier, Tobias (Amsterdam : Elsevier, 2013)
    Using conventional grinding wheels, wheel-sided chatter vibration is one of the limiting factors in terms of productivity and surface finish. Initial vibration related to the dynamic behavior of the machine tool copy on ...
  • Active tailstock for precise alignment of precision forged crankshafts during grinding 
    Denkena, Berend; Gümmer, Olaf (Amsterdam : Elsevier, 2013)
    Within the Collaborative Research Centre 489 at the Leibniz Universitaet Hannover a new and innovative process chain for the manufacture of crankshafts is being investigated. By burr-free and near-net-shaped precision ...
  • Actuation and stiffening in fluid-driven soft robots using low-melting-point material 
    Peters, Jan; Nolan, Erin; Wiese, Mats; Miodownik, Mark; Spurgeon, Sarah; Arezzo, Alberto; Raatz, Annika; Wurdemann, Helge A. (Piscataway, NJ : IEEE, 2019)
    Soft material robots offer a number of advantages over traditional rigid robots in applications including human-robot interaction, rehabilitation and surgery. These robots can navigate around obstacles, elongate, squeeze ...
  • Adaptive inspection planning using a digital twin for quality assurance 
    Reuter, Leon; Denkena, Berend; Wichmann, Marcel (Amsterdam [u.a.] : Elsevier, 2024)
    The integration of a digital twin into inspection planning enables a novel procedure that reduces avoidable inspection times and costs. This paper shows a method for component-specific adaption of inspection plans by feeding ...
  • Adaptive inspection planning – Consideration of uncertainties in machining 
    Denkena, Berend; Wichmann, Marcel; Reuter, Leon (Düsseldorf : VDI Fachmedien, 2023)
    Data-driven prediction models are the core of adaptive test planning, but always have a model-based prediction error. For a reliable interpretation of the prediction result, the modeling of the associated uncertainty is ...
  • Additive Manufacturing and Vulcanization of Carbon Black Filled Natural Rubber Based Components 
    Leineweber, Sebastian; Sundermann, Lion; Bindszus, Lars; Overmeyer, Ludger; Klie, Benjamin; Wittek, Heike; Giese, Ulrich (Lancaster, Pa. : Rubber Division of the American Chemical Society, 2021-10-15)
    Additive manufacturing of thermoplastics or metals is a well-approved sustainable process for obtaining rapidly precise and individual technical components. Except for crosslinked silicone rubber or thermoplastic elastomers, ...
  • Additive manufacturing of copper vertical interconnect accesses by laser processing 
    Overmeyer, Ludger; Olsen, Ejvind; Hoffmann, Gerd-Albert (Oxford : Elsevier, 2021)
    This paper introduces a new manufacturing process for vertical interconnect accesses (VIA). In contrast to industrially established VIA metallization technologies, the presented approach takes place without any chemical ...
  • Additive Manufacturing of Functionalized Silicone Optics 
    Ziebehl, Arved (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023-09-20)
    Infusing highly transparent silicone optics with ferromagnetic particles makes these optical elements susceptible to controllable deformations. Lenses made of silicone can thus shift their focal length. This poster presents ...
  • Additive Manufacturing of Metallic Multi-Material Parts: Local Conductivity Adjustment through Functionally Graded Material Transitions of 316L and CuCrZr 
    Meyer, Ina; Glitt, Leon; Ehlers, Tobias (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2023)
    Recently, powder bed-based additive manufacturing has made it possible to produce metallic multi-material parts where the material can be varied within the build plane voxel by voxel. This capability enables the realization ...
  • Adhesive Bonding of an Aluminum Alloy with and without an Oxide Layer in Atmospheres with Different Oxygen Contents 
    Gerland, Sandra; Raatz, Annika (Basel : MDPI, 2023)
    Aluminum surfaces in a normal atmosphere are always coated with a native oxide layer. To prevent a new layer from forming after this oxide layer has been removed, an environment without oxygen must be created. This work ...
  • Advanced Characterization Techniques for Turbine Blade Wear and Damage 
    Schlobohm, Jochen; Bruchwald, Oliver; Frąckowiak, Wojciech; Li, Yinan; Kästner, Markus; Pösch, Andreas; Reimche, Wilfried; Maier, Hans Jürgen; Reithmeier, Eduard (Amsterdam [u.a.] : Elsevier, 2017)
    This paper presents four complementary non-destructive measurement techniques for material characterization and damage detection of turbine blades. The techniques are macroscopic fringe projection with inverse fringe ...
  • Advanced process design for re-contouring using a time-domain dynamic material removal simulation 
    Denkena, Berend; Pape, O.; Grove, T.; Mücke, A. (Amsterdam : Elsevier B.V., 2019)
    The repair of components often requires the removal of excess weld material. This removal is considered as re-contouring. Re-contouring processes have to be designed individually for each case of damage to fulfil the high ...
  • Advances in powder bed based Additive Manufacturing of metal-glass-hybrid-components 
    Abel, Arvid; Sayilgan, Vurgun; Bernhard, Robert; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2022)
    As powder bed based additive manufacturing (AM) is gaining more traction in the research and industry, significant efforts are made to expand the capability of AM in combining different materials. Conventionally, multiple ...
  • Aerodynamic and aeroelastic effects of design-based geometry variations on a low-pressure compressor 
    Eggers, Torben; Kim, Hye Rim; Bittner, Simon; Friedrichs, Jens; Seume, Joerg R. (Basel : MDPI, 2020)
    In modern aircraft engines, the low-pressure compressor (LPC) is subjected to a flow characterized by strong wakes and secondary flows from the upstream fan. This concerns ultra-high bypass ratio (UHBR) turbofan engines, ...
  • Aerodynamic Feeding 4.0: A New Concept for Flexible Part Feeding 
    Kolditz, Torge; Raatz, Annika (Amsterdam [u.a.] : Elsevier, 2022)
    In modern production environments, the need for flexible handling systems constantly increases due to increasing uncertainties, shorter product life cycles and higher cost pressure. Part feeding systems are vital to modern ...
  • Aerodynamics of the Maple Seed 
    Desenfans, Philip (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - The paper presents a theoretical framework that describes the aerodynamics of a falling maple (Acer pseudoplatanus) seed. --- Methodology - A semi-empirical method is developed that provides a ratio stating how ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken