Browse Fakultät für Maschinenbau by Dewey Decimal Classification

Browse Fakultät für Maschinenbau by Dewey Decimal Classification

Sort by: Order: Results:

  • Quentin, Lorenz; Beermann, Rüdiger; Pösch, Andreas; Reithmeier, Eduard; Kästner, Markus (Bellingham, WA : S P I E - International Society for Optical Engineering, 2017)
    We present a fringe projection system to measure glowing hot hybrid components in between production processes. For this a high power green light projector, based on TI DLP technology, is used to create the highest possible ...
  • Loftfield, Nina; Kästner, Markus; Reithmeier, Eduard (Bellingham, WA : S P I E - International Society for Optical Engineering, 2017)
    A critical factor of endoprostheses is the quality of the tribological pairing. The objective of this research project is to manufacture stochastically porous aluminum oxide surface coatings with high wear resistance and ...
  • Müller, H.S.; Moffatt, J.S.; Haist, M.; Vogel, M. (Bristol : Institute of Physics Publishing, 2019)
    Sustainable concretes, also termed eco-concretes or green concretes, produced with a significantly reduced cement content provide a promising alternative for improving concrete sustainability without using supplementary ...
  • Gryshkov, O.; Müller, M.; Leal-Marin, S.; Mutsenko, V.; Suresh, S.; Kapralova, V.M.; Glasmacher, B. (Bristol : Institute of Physics Publishing, 2019)
    Tissue engineering and cell-based therapy approaches require artificial scaffolds as extracellular matrix (ECM) and three-dimensional (3D) environment for clinically relevant cells to attach, be metabolically active and ...
  • Hentschel, Olaf Peter; Bonhage, Marius; Panning-von Scheidt, Lars; Wallaschek, Jörg; Denk, Markus; Masserey, Pierre-Alain (Warsaw : Polish Society of Theoretical and Allied Mechanics, 2016)
    In the present paper, an experimental setup for structural damping determination arising from energy dissipations within the material is presented. The experimental setup is developed in such a way that all unintended ...
  • Tymkovych, Maksym Yu; Avrunin, Oleg G.; Paliy, Victor G.; Filzow, Maksim; Gryshkov, Oleksandr; Glasmacher, Birgit; Omiotek, Zbigniew; Dzierlak, Roza; Smailova, Saule; Kozbekova, Ainur (Bellingham, WA : S P I E - International Society for Optical Engineering, 2017)
    The work is dedicated to the segmentation problem of human nasal airways using Cone Beam Computed Tomography. During research, we propose a specialized approach of structured segmentation of nasal airways. That approach ...
  • Hassel, T.; Klimov, G.; Beniyash, A. (Bristol : Institute of Physics Publishing, 2018)
    One of the disadvantages of the non-vacuum electron beam (NVEB) systems is a high acceleration voltage, which leads to an increase of defence against X-ray radiation. Due to the reduced acceleration voltage. On the one ...
  • Enns, Y.B.; Pyatishev, E.N.; Glukhovskoy, A. (Bristol : Institute of Physics Publishing, 2017)
    The static mechanical properties of a bistable electromechanical drive with arcuate suspension is investigated. The behaviour of an arcuate suspension and the influence of the beam thickness modulation on the stability of ...
  • Zou, Yibo; Kästner, Markus; Reithmeier, Eduard (Bellingham, WA : S P I E - International Society for Optical Engineering, 2015)
    Nowadays thermal plasma spray coating is widespread in automobile industry. For example, in the cylinder manufacturing process coatings are applied for friction reduction, wear and corrosion resistance. After the honing ...
  • Gaa, Johannes; Kahrs, Lüder Alexander; Müller, Samuel; Majdani, Omid; Ortmaier, Tobias (Bellingham, WA : S P I E - International Society for Optical Engineering, 2015)
    Planning and analyzing of surgical interventions are often based on computer models derived from computed tomography images of the patient. In the field of cochlear implant insertion the modeling of several structures of ...
  • Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard (Bellingham, WA : S P I E - International Society for Optical Engineering, 2016)
    The inspection of functional elements is a crucial part of modern production cycles. However, with higher integration of production machinery and products, the accessibility for measurement systems is more and more limited. ...
  • Schwack, F.; Stammler, M.; Poll, G.; Reuter, A. (Bristol : Institute of Physics Publishing, 2016)
    The fatigue life calculation of bearings under rotating conditions has been well researched and standardized. In contrast, for bearings in oscillating applications no international standards exist. As a result, pitch ...
  • Seume, Jörg R.; Peters, M.; Kunte, H. (Bristol : Institute of Physics Publishing, 2017)
    Manufactures are searching for possibilities to increase the efficiency of combustion engines by using the remaining energy of the exhaust gas. One possibility to recover some of this thermal energy is an organic Rankine ...
  • Mueller, M.; Hoehlich, D.; Scharf, I.; Lampke, T.; Holländer, Ulrich; Maier, Hans Jürgen (Bristol : Institute of Physics Publishing, 2016)
    Beside lithium batteries, PEM fuel cells are the most promising strategy as a power source to achieve the targets for introducing and increasing the usage of electric vehicles. Due to limited space and weight problems, ...
  • Li, Yinan; Kästner, Markus; Reithmeier, Eduard (Bellingham, WA : S P I E - International Society for Optical Engineering, 2015)
    Vertical scanning interferometry (VSI) techniques are widely used to profile microscopic surface structures of industrial products. This paper introduces a high-precision fast optical measurement system with an optimized ...
  • Schmieding, M.; Holländer, Ulrich; Möhwald, Kai (Bristol : Institute of Physics Publishing, 2017)
    Objective of the project presented is the development of a joining process for hot working steel components at low brazing temperatures leading to a bond with a much higher remelting temperature. This basically is achieved ...
  • Li, Yinan; Bossmeyer, Hagen; Kästner, Markus; Reithmeier, Eduard (Bellingham, WA : S P I E - International Society for Optical Engineering, 2016)
    Common 2D laser line triangulation sensors allow a 2D profile measurement in a single line. To scan samples with great curved surfaces like edges, a single laser line triangulation sensor is insufficient. To measure the ...
  • Akin, Meriem; Rezem, Maher; Rahlves, Maik; Cromwell, Kevin; Roth, Bernhard; Reithmeier, Eduard; Wurz, Marc Christopher; Rissing, Lutz; Maier, Hans Jürgen (Bellingham, WA : S P I E - International Society for Optical Engineering, 2016)
    While automatic hot embossing systems are available for large- and small-scale productions of polymeric devices, one of the process challenges remains to be the manufacturing of precise, durable, and yet inexpensive hot ...
  • Ebeling, Johann-Christoph; Luo, Xing; Kabelac, Stephan; Luckmann, Sebastian; Kruse, Horst (London : Academic Press Inc., 2017)
    The heat transfer performance of a vertical two-phase closed thermosyphon (TPCT) used in a geothermal heat pump was experimentally investigated. The TPCT is a vertical plain steel pipe with inner diameter of 114 mm and ...
  • Held, Marcel Philipp; Lachmayer, Roland (Bellingham, WA : S P I E - International Society for Optical Engineering, 2017)
    High-resolution vehicle headlamps represent a future-oriented technology that can be used to increase traffic safety and driving comfort. As a further development to the current Matrix Beam headlamps, LED-based pixel light ...

Search the repository


Browse

My Account

Usage Statistics