A novel tool concept for roughing and finishing operations

Show simple item record

dc.identifier.uri http://dx.doi.org/10.15488/5162
dc.identifier.uri https://www.repo.uni-hannover.de/handle/123456789/5209
dc.contributor.author Denkena, Berend
dc.contributor.author Grove, Thilo
dc.contributor.author Ellersiek, L.
dc.date.accessioned 2019-08-15T07:18:14Z
dc.date.available 2019-08-15T07:18:14Z
dc.date.issued 2018
dc.identifier.citation Denkena, Berend; Grove, Thilo; Ellersiek, L.: A novel tool concept for roughing and finishing operations. In: Procedia Manufacturing 18 (2018), S. 27-34. DOI: https://doi.org/10.1016/j.promfg.2018.11.004
dc.description.abstract In this paper, a new tool concept suitable for simultaneous roughing and finishing operations is presented. The developed end mill has two radial recessed roughing teeth with a flank face chamfer and two sharp finishing teeth. While the chamfered cutting edges ensure a high process stability due to process damping, the sharp cutting edges generate the final surface. In order to investigate the roughing and finishing capabilities, the tool was compared with a roughing tool with chamfered teeth only and a finishing tool with sharp teeth only. With all three tool concepts milling experiments were carried out, in which forces, process stability and surface quality were analyzed. The generated surface quality for the new tool concept could be significantly improved compared to the roughing tool. However, the aimed surface quality of the finishing tool with sharp edges could not be achieved. Moreover, experimental results show that the process stability of the new tool concept is significantly higher than the process stability of the finishing tool. eng
dc.language.iso eng
dc.publisher Amsterdam : Elsevier B.V.
dc.relation.ispartofseries Procedia Manufacturing 18 (2018)
dc.rights CC BY-NC-ND 4.0 Unported
dc.rights.uri https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject Chamfer eng
dc.subject End mill eng
dc.subject Flank eng
dc.subject Computer science eng
dc.subject Mechanical engineering eng
dc.subject.ddc 620 | Ingenieurwissenschaften und Maschinenbau ger
dc.title A novel tool concept for roughing and finishing operations eng
dc.type article
dc.type Text
dc.relation.issn 2351-9789
dc.relation.doi https://doi.org/10.1016/j.promfg.2018.11.004
dc.bibliographicCitation.volume 18
dc.bibliographicCitation.firstPage 27
dc.bibliographicCitation.lastPage 34
dc.description.version publishedVersion
tib.accessRights frei zug�nglich

Files in this item

The following license files are associated with this item:

This item appears in the following Collection(s):

Show simple item record


Search the repository


My Account

Usage Statistics