Auflistung An-Institute nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • The 2020 photovoltaic technologies roadmap 
    Wilson, Gregory M.; Al-Jassim, Mowafak; Metzger, Wyatt K.; Glunz, Stefan W.; Verlinden, Pierre; Xiong, Gang; Mansfield, Lorelle M.; Stanbery, Billy J.; Zhu, Kai; Yan, Yanfa; Berry, Joseph J.; Ptak, Aaron J.; Dimroth, Frank; Kayes, Brendan M.; Tamboli, Adele C.; Peibst, Robby; Catchpole, Kylie; Reese, Matthew O.; Klinga, Christopher S.; Denholm, Paul; Morjaria, Mahesh; Deceglie, Michael G.; Freeman, Janine M.; Mikofski, Mark A.; Jordan, Dirk C.; TamizhMani, Govindasamy; Sulas-Kern, Dana B. (Bristol : IOP Publ., 2020)
    Over the past decade, the global cumulative installed photovoltaic (PV) capacity has grown exponentially, reaching 591 GW in 2019. Rapid progress was driven in large part by improvements in solar cell and module efficiencies, ...
  • 2×10-13 Fractional Laser-Frequency Stability with a 7-cm Unequal-Arm Mach-Zehnder Interferometer 
    Huarcaya, Victor; Álvarez, Miguel Dovale; Penkert, Daniel; Gozzo, Stefano; Cano, Pablo Martínez; Yamamoto, Kohei; Delgado, Juan José Esteban; Mehmet, Moritz; Danzmann, Karsten; Heinzel, Gerhard (College Park, Md. [u.a.] : American Physical Society, 2023)
    To achieve subpicometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser-frequency noise, typically by locking the laser to a stable frequency reference, ...
  • 3-OGC: Catalog of Gravitational Waves from Compact-binary Mergers 
    Nitz, Alexander H.; Capano, Collin D.; Kumar, Sumit; Wang, Yi-Fan; Kastha, Shilpa; Schäfer, Marlin; Dhurkunde, Rahul; Cabero, Miriam (London : Institute of Physics Publ., 2021)
    We present the third open gravitational-wave catalog (3-OGC) of compact-binary coalescences, based on the analysis of the public LIGO and Virgo data from 2015 through 2019 (O1, O2, O3a). Our updated catalog includes a ...
  • 3D in vitro platform produced by two-photon polymerization for the analysis of neural network formation and function 
    Timashev, P.S.; Vedunova, M.V.; Guseva, D.; Ponimaskin, E.; Deiwick, A.; Mishchenko, T.A.; Mitroshina, E.V.; Koroleva, A.V.; Pimashkin, A.S.; Mukhina, I.V.; Panchenko, V.Y.; Chichkov, Boris; Bagratashvili, Victor N. (Bristol : Institute of Physics Publishing, 2016)
    Zr-Si organic-inorganic scaffolds fabricated by a two-photon polymerization technique were used for the primary culture of mouse embryonic neural cells. We observed that dissociated hippocampal cells adhere to the scaffolds, ...
  • 4-OGC: Catalog of Gravitational Waves from Compact Binary Mergers 
    Nitz, Alexander H.; Kumar, Sumit; Wang, Yi-Fan; Kastha, Shilpa; Wu, Shichao; Schäfer, Marlin; Dhurkunde, Rahul; Capano, Collin D. (London : Institute of Physics Publ., 2023)
    We present the fourth Open Gravitational-wave Catalog (4-OGC) of binary neutron star (BNS), binary black hole (BBH), and neutron star-black hole (NSBH) mergers. The catalog includes observations from 2015 to 2020 covering ...
  • A combined method for correlative 3D imaging of biological samples from macro to nano scale 
    Kellner, Manuela; Heidrich, Marko; Lorbeer, Raoul-Amadeus; Antonopoulos, Georgios C.; Knudsen, Lars; Wrede, Christoph; Izykowski, Nicole; Grothausmann, Roman; Jonigk, Danny; Ochs, Matthias; Ripken, Tammo; Kühnel, Mark P.; Meyer, Heiko (London : Nature Publishing Group, 2016)
    Correlative analysis requires examination of a specimen from macro to nano scale as well as applicability of analytical methods ranging from morphological to molecular. Accomplishing this with one and the same sample is ...
  • A Cross-Country Model for End-Use Specific Aggregated Household Load Profiles 
    Schlemminger, Marlon; Niepelt, Raphael; Brendel, Rolf (Basel : MDPI, 2021)
    End-use specific residential electricity load profiles are of interest for energy system modelling that requires future load curves or demand-side management. We present a model that is applicable across countries to predict ...
  • A noise simulator for eLISA: Migrating LISA Pathfinder knowledge to the eLISA mission 
    Armano, M.; Audley, H.; Auger, G.; Baird, J.; Binetruy, P.; Born, M.; Bortoluzzi, D.; Brandt, N.; Bursi, A.; Caleno, M.; Cavalleri, A.; Cesarini, A.; Cruise, M.; Danzmann, Karsten; Diepholz, I.; Dolesi, R.; Dunbar, N.; Ferraioli, L.; Ferroni, V.; Fitzsimons, E.; Freschi, M.; Gallegos, J.; García Marirrodriga, C.; Gerndt, R.; Gesa, L.I.; Gibert, F.; Giardini, D.; Giusteri, R.; Grimani, C.; Harrison, I.; Heinzel, G.; Hewitson, M.; Hollington, D.; Hueller, M.; Huesler, J.; Inchauspé, H.; Jennrich, O.; Jetzer, P.; Johlander, B.; Karnesis, N.; Kaune, B.; Korsakova, N.; Killow, C.; Lloro, I.; Maarschalkerweerd, R.; Madden, S.; Mance, D.; Martín, V.; Martin-Porqueras, F.; Mateos, I.; McNamara, P.; Mendes, J.; Mendes, L.; Moroni, A.; Nofrarias, M.; Paczkowski, S.; Perreur-Lloyd, M.; Petiteau, A.; Pivato, P.; Plagnol, E.; Prat, P.; Ragnit, U.; Ramos-Castro, J.; Reiche, J.; Perez, J.A.R.; Robertson, D.; Rozemeijer, H.; Russano, G.; Sarra, P.; Schleicher, A.; Slutsky, J.; Sopuerta, C.F.; Sumner, T.; Texier, D.; Thorpe, J.; Trenkel, C.; Tu, H.B.; Vetrugno, D.; Vitale, S.; Wanner, G.; Ward, H.; Waschke, S.; Wass, P.; Wealthy, D.; Wen, S.; Weber, W.; Wittchen, A.; Zanoni, C.; Ziegler, T.; Zweifel, P. (Bristol : Institute of Physics Publishing, 2015)
    We present a new technical simulator for the eLISA mission, based on state space modeling techniques and developed in MATLAB. This simulator computes the coordinate and velocity over time of each body involved in the ...
  • A novel approach for high deposition rate cladding with minimal dilution with an arc - Laser process combination 
    Barroi, A.; Hermsdorf, J.; Prank, U.; Kaierle, S. (Amsterdam : Elsevier B.V., 2013)
    First results of the process development of a novel approach for a high deposition rate cladding process with minimal dilution are presented. The approach will combine the enormous melting potential of an electrical arc ...
  • A novel shape memory plate osteosynthesis for noninvasive modulation of fixation stiffness in a rabbit tibia osteotomy model 
    Müller, Christian W.; Pfeifer, Ronny; Meier, Karen; Decker, Sebastian; Reifenrath, Janin; Gösling, Thomas; Wesling, Volker; Krettek, Christian; Hurschler, Christof; Krämer, Manuel (New York, NY : Hindawi Publishing Corporation, 2015)
    Nickel-titanium shape memory alloy (NiTi-SMA) implants might allow modulating fracture healing, changing their stiffness through alteration of both elastic modulus and cross-sectional shape by employing the shape memory ...
  • A semicoherent glitch-robust continuous-gravitational-wave search method 
    Ashton, G.; Prix, R.; Jones, D.I. (College Park, MD : American Physical Society, 2018)
    Isolated nonaxisymmetric rotating neutron stars producing continuous-gravitational-wave signals may undergo occasional spin-up events known as glitches. If unmodeled by a search, these glitches can result in continuous ...
  • Accretion-induced spin-wandering effects on the neutron star in Scorpius X-1: Implications for continuous gravitational wave searches 
    Mukherjee, Arunava; Messenger, Chris; Riles, Keith (College Park, MD : American Physical Society, 2018)
    The LIGO's discovery of binary black hole mergers has opened up a new era of transient gravitational wave astronomy. The potential detection of gravitational radiation from another class of astronomical objects, rapidly ...
  • Accurate and rapid gravitational waveform models for binary black hole coalescences 
    Setyawati, Yoshinta Eka (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2021-09-29)
    The first direct gravitational wave detection by LIGO and Virgo in 2015 marked the beginning of the gravitational wave astronomy era. Gravitational waves are an excellent tool to prove general relativity and unveil compact ...
  • Accurate propagation of ultrashort pulses in nonlinear waveguides using propagation models for the analytic signal 
    Melchert, O.; Morgner, Uwe; Roth, B.; Babushkin, I.; Demircan, A. (Bellingham, WA : SPIE - International Society for Optical Engineering, 2018)
    We present a numerical approach for the accurate simulation of the complex propagation dynamics of ultrashort optical pulses in nonlinear waveguides, especially valid for few-cycle pulses. The propagation models are derived ...
  • Adaptable orthopedic shape memory implants 
    Pfeifer, Ronny; Müller, Christian W.; Hurschler, Christof; Kaierle, Stefan; Wesling, Volker; Haferkamp, Heinz (Amsterdam : Elsevier B.V., 2013)
    Apart from biological factors, the bone healing process strongly depends on the mechanical properties of the implant applied. The stiffness of the implant influences the micro-motion, one of the most important stimuli of ...
  • Adding eccentricity to quasicircular binary-black-hole waveform models 
    Setyawati, Yoshinta; Ohme, Frank (Ridge, NY : American Physical Society, 2021)
    The detection of gravitational-wave signals from coalescing eccentric binary black holes would yield unprecedented information about the formation and evolution of compact binaries in specific scenarios, such as dynamical ...
  • Additive manufacturing of glass: CO2-Laser glass deposition printing 
    Von Witzendorff, Philipp; Pohl, Leonhard; Suttmann, Oliver; Heinrich, Peter; Heinrich, Achim; Zander, Jörg; Bragard, Holger; Kaierle, Stefan (Amsterdam : Elsevier B.V., 2018)
    Additive manufacturing is used in several industrial sectors where polymers and metals are established materials. Different academic studies prove that additive manufacturing methods can be applied on glass materials using ...
  • Adhesion, Vitality and Osteogenic Differentiation Capacity of Adipose Derived Stem Cells Seeded on Nitinol Nanoparticle Coatings 
    Strauß, Sarah; Neumeister, Anne; Barcikowski, Stephan; Kracht, Dietmar; Kuhbier, Jörn W.; Radtke, Christine; Reimers, Kerstin; Vogt, Peter M. (San Francisco, California, US : PLOS, 2013)
    Autologous cells can be used for a bioactivation of osteoimplants to enhance osseointegration. In this regard, adipose derived stem cells (ASCs) offer interesting perspectives in implantology because they are fast and easy ...
  • Advanced high pressure turbine blade repair technologies 
    Alfred, Irene; Nicolaus, Martin; Hermsdorf, Jörg; Kaierle, Stefan; Möhwald, Kai; Maier, Hans Jürgen; Wesling, Volker (Amsterdam : Elsevier B.V., 2018)
    Components in aircraft engines and gas turbines are exposed to extreme conditions in order to increase performance and efficiency of the overall engine, hence there is an increasing need for cost-effective and time-efficient ...
  • Advanced laser transmission welding strategies for fibre reinforced thermoplastics 
    Wippo, V.; Jaeschke, P.; Brueggmann, M.; Suttmann, O.; Overmeyer, L. (Amsterdam : Elsevier B.V., 2014)
    Laser transmission welding can be used to join endless fibre reinforced thermoplastics. The welding temperature is affected by the heat conduction along carbon fibres and depends on the local orientation of the fibres in ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken