dc.identifier.uri |
https://www.repo.uni-hannover.de/handle/123456789/12544 |
|
dc.identifier.uri |
https://doi.org/10.15488/12445 |
|
dc.contributor.author |
Denkena, Berend
|
|
dc.contributor.author |
Breidenstein, Bernd
|
|
dc.contributor.author |
Dittrich, Marc-André
|
|
dc.contributor.author |
Nguyen, Hai Nam
|
|
dc.contributor.author |
Fricke, Lara Vivian
|
|
dc.contributor.author |
Maier, Hans Jürgen
|
|
dc.contributor.author |
Zaremba, David
|
|
dc.date.accessioned |
2022-07-07T08:09:56Z |
|
dc.date.available |
2022-07-07T08:09:56Z |
|
dc.date.issued |
2021 |
|
dc.identifier.citation |
Denkena, B.; Breidenstein, B.; Dittrich, M.-A.; Nguyen, H.N.; Fricke, L.V. et al.: Effects on the deformation-induced martensitic transformation in AISI 304 in external longitudinal turning. In: Advances in Industrial and Manufacturing Engineering 2 (2021), 100044. DOI: https://doi.org/10.1016/j.aime.2021.100044 |
|
dc.description.abstract |
During the turning process of metastable austenitic steels, austenite is transformed into hard martensite by plastic deformation at low temperatures. This enables the production of components, which have both a hardened subsurface zone and a ductile core. Cryogenic cooling allows the subsurface zone to be hardened during machining, which leads to a shortening of the process chain. However, effects such as wear can make it challenging to adjust the properties of the subsurface zone during turning. By adjusting the tool microgeometry with a flank face modification, the wear condition can be kept constant for a certain period. In addition, the significance analysis with different tool microgeometries shows that only feed and initial temperature have a significant effect on the martensite formation. © 2021 The Author(s) |
eng |
dc.language.iso |
eng |
|
dc.publisher |
[Amsterdam] : Elsevier ScienceDirect |
|
dc.relation.ispartofseries |
Advances in Industrial and Manufacturing Engineering 2 (2021) |
|
dc.rights |
CC BY-NC-ND 4.0 Unported |
|
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/4.0/ |
|
dc.subject |
Deformation-induced martensitic transformation |
eng |
dc.subject |
Flank face modification |
eng |
dc.subject |
Tool geometry |
eng |
dc.subject.ddc |
600 | Technik
|
ger |
dc.subject.ddc |
620 | Ingenieurwissenschaften und Maschinenbau
|
ger |
dc.title |
Effects on the deformation-induced martensitic transformation in AISI 304 in external longitudinal turning |
|
dc.type |
Article |
|
dc.type |
Text |
|
dc.relation.essn |
2666-9129 |
|
dc.relation.doi |
https://doi.org/10.1016/j.aime.2021.100044 |
|
dc.bibliographicCitation.volume |
2 |
|
dc.bibliographicCitation.firstPage |
100044 |
|
dc.description.version |
publishedVersion |
|
tib.accessRights |
frei zug�nglich |
|