Distinguishability Analysis for Multiple Mass Models of Servo Systems with Commissioning Sensors

Abstract

Physically motivated models of electromechanical motion systems enable model-based control theory and facilitate system interpretation. Unfortunately, the effort of modelling restricts the usage of model-based methods in many applications. Some approaches to automatically generate models from measurements choose the best model based on minimizing the residual. These model selection attempts are limited due to ambiguities in reconstructing the internal structure from the input-output behaviour because usually motion systems have only one actuator and one sensor. Often, it is unknown if the resulting model is unique or if other models with different structure would fit equally well. The set of candidate models should be designed to contain only distinguishable models but ambiguities are often unknown to the experimenter. In this paper distinguishability is investigated systematically for a class of multiple mass models representing servo positioning systems. In the analysis a new criterion for indistinguishability is used. The benefit of additional, structural sensors on distinguishability of models is demonstrated which suggests to mount them temporarily for the commissioning phase in order to facilitate the model selection. It turns out that the best results can be achieved if synergies among sensor signals are utilized. © 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.