• Reference-phase Model for the Transfer Process of Deep Tech Innovations 

  Schuh, Günther; Latz, Tim; Jakob, Tobias (Hannover : publish-Ing., 2023)

  The term Deep Tech is receiving major attention from start-ups, venture capitalists, and governmental decision makers as this special group of technology does have a strong impact on societies and national innovation ...
• A Tool For Economic Development Agencies For The Model-Based Business Consultation In Location Planning 

  Hook, Justin; Kik, David; Nyhuis, Peter; Spengler, Thomas S. (Hannover : publish-Ing., 2023)

  Location planning is crucial to a company’s long-term success. The increasing concentration of companies in urban areas poses new challenges for regional location planning. For companies to make good long-term location ...
• Towards The Internet Of Production – How To Increase Data Sharing For Successful Supply Chain Collaboration 

  Leckel, Anja; Linnartz, Maria (Hannover : publish-Ing., 2023)

  Numerous start-ups and now even some major corporates are currently trying to improve visibility and foresight in the manufacturing industry through connected supply chains, or in other words, through increased data sharing. ...
• Setup-optimised Dispatching At Work Systems With Pallet Changers 

  Mütze, Alexander; Lebbing, Simon (Hannover : publish-Ing., 2023)

  Setup-optimised dispatching at work systems is the subject of many investigations and studies. The considerations range from developing corresponding heuristics and analysing their effects on achieving logistical objectives ...
• Capabilities of the Intelligent Manufacturing Enterprise 

  Schuh, Günther; Scheuer, Thomas; Padovano, Riley Colleen (Hannover : publish-Ing., 2023)

  Manufacturing enterprises encounter pressure to digitalize and increase their intelligence as their environments demand improved productivity and agility. Based on existing research on intelligent enterprises, manufacturing ...
• Software-Tool To Determine Functional Flexibility Based On Employee Specific Risks 

  Ast, Jonas; Nyhuis, Peter (Hannover : publish-Ing., 2022)

  During training of manual assembly operations, all employees experience continuous improvement caused by learning. This improvement is known as learning behaviour and describes individual improvement of competence and ...
• Case Study: Smart Maintenance Maturity Assessment as a Starting Point for Achieving Reliability and Safety in the Oil and Gas Industry 

  Schuh, Günther; Defer, Florian; Frank, Jana; Strack, Bernhard; Stich, Volker; Bahrami, Kourosh; Honné, Michael (Hannover : publish-Ing., 2022)

  Industry 4.0 and Smart Maintenance represent a great opportunity to make manufacturing and maintenance more effective, safer, and reliable. However, they also represent massive change and corresponding challenges for ...
• A New Textile Production Type - Urban Apparel Production In Microfactories 

  Winands, Katarina; Müller, Kai; Kollera, Carlotta; Gries, Thomas (Hannover : publish-Ing., 2022)

  The World of production has changed due to the events of 2020 and 2021. The aftermaths are still being felt in many sectors of the economy. In addition to delayed deliveries due to lack of resources and production stoppages, ...
• Improving The Planning Quality Through Model-Based Factory Planning In BIM 

  Schäfer, Simon F.; Hingst, Lennart; Hook, Justin; Rieke, Leonard; Nyhuis, Peter (Hannover : publish-Ing., 2022)

  In recent years, Building Information Modelling (BIM), which originated in the construction industry, is increasingly finding its way into the planning of factories and production environments. In the scientific assessment ...
• Applicability of Advanced Manufacturing Technologies for Agile Product Development in the Internet of Production: A Strategic Framework 

  Kelbel, Hannah Carlotta; Stoecker, Lena; Frank, Julius Johannes; Lukas, Gerret; Bergweiler, Georg; Gries, Thomas; Greb, Christoph; Schuh, Günther (Hannover : publish-Ing., 2022)

  Evolving product complexities and customer demands in an increasingly unstable environment are challenging companies worldwide. Agile product development can help to overcome these challenges but originates in software ...
• Defining the Intelligent Manufacturing Enterprise 

  Schuh, Günther; Scheuer, Thomas; Padovano, Riley Colleen (Hannover : publish-Ing., 2022)

  Manufacturing enterprises encounter pressure to digitalize and increase their intelligence as their environments demand increased productivity and agility. Based on existing research on intelligent enterprises, manufacturing ...
• Description Approach for the Transfer of Competencies and Resources in Collaborations Between Corporates and Deep Tech Startups 

  Schuh, Günther; Studerus, Bastian; Rohmann, Aaron (Hannover : publish-Ing., 2022)

  Deep tech innovations and emerging competitors are putting increasing pressure on established companies to defend their competitive position in globalized markets. With the aim of efficiently generating deep tech innovations ...
• Development of a Life Cycle Model for Deep Tech Startups 

  Schuh, Günther; Studerus, Bastian; Hämmerle, Carsten (Hannover : publish-Ing., 2022)

  Startups with a technological focus usually pursue the overarching goal of scaling and establishing themselves as a corporate with a product portfolio as quickly as possible. Deep tech startups in particular identify market ...
• Einordnung der Robustheit und Resilienz in die Veränderungsfähigkeit 

  Hingst, Lennart; Wecken, Lena; Brunotte, Eric; Nyhuis, Peter (Hannover : publish-Ing., 2022)

  Turbulenzen im Fabrikumfeld stehen seit den Neunzigerjahren für einen permanenten Strukturwandel durch kontinuierliche Veränderungen, die Megatrends wie die Digitalisierung verstärken. Da die Prognosefähigkeit von Entwicklungen ...
• Development Of A Software-based Tool For Factory Communication Structure Evaluation In The Context Of Industry 4.0 

  Park, Yeong-Bae; Papke, Lena; Nyhuis, Peter (Hannover : publish-Ing., 2022)

  The environment of manufacturing companies is constantly changing. Industry 4.0 as an overarching contemporary trend constantly places new demands on production technology. But Industry 4.0 does not only have new requirements ...
• Applicability Of Gamification In Industrial Work Processes To Influence Target Variables 

  Gohlke, Julius; Nyhuis, Peter (Hannover : publish-Ing., 2022)

  Today more than ever, companies are forced to regularly initiate projects in their factories in order to ensure competitiveness through constant adaptation and change. Such projects are controlled and managed individually. ...
• Identification and Analysis of Patterns of Machine Learning Systems in the Connected, Adaptive Production 

  Schuh, Günther; Scholz, Paul; Portik, Johannes (Hannover : publish-Ing., 2022)

  Over the past six decades, many companies have discovered the potential of computer-controlled systems in the manufacturing industry. Overall, digitization can be identified as one of the main drivers of cost reduction in ...
• Effects Of Different Order Processing Strategies On Operating Curves Of Logistic Models: A Comparison Of Make-to-Order And Make-to-Stock 

  Wolff, Katharina; Maier, Janine Tatjana; Heuer, Tammo; Nyhuis, Peter; Schmidt, Matthias (Hannover : publish-Ing., 2021)

  Complexity in the decision-making process results from the interaction of various parameters. Exemplary influencing factors are the durability of products, the desired delivery times, and the required product variants. In ...
• Operationalisation Of Communication Structure Requirements In Factories In The Context Of Industry 4.0 

  Park, Yeong-Bae; Nyhuis, Peter (Hannover : publish-Ing., 2021)

  In today's markets, customers are demanding increasingly individualised products at a consistent price and quality level. Within production, this development is associated with a decrease in batch sizes and an increase in ...
• Increasing Resilience in Procurement in the Context of the Internet of Production 

  Linnartz, Maria; Motz, Ursula; Schröer, Tobias; Stich, Volker; Müller, Kai; Greb, Christoph (Hannover : publish-Ing., 2021)

  Recent developments have demonstrated the challenges and impacts of disruptions in supply chains. Current disruptions especially affected procurement and have indicated a lack of resilience. Resilience aims at being prepared, ...

View more