Auflistung Fakultäten nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Automated design of multi-stage forging sequences for die forging 
    Hedicke-Claus, Yorck; Kriwall, Mareile; Stonis, Malte; Behrens, Bernd-Arno (Berlin ; Heidelberg : Springer, 2023)
    Forgings are produced in several process steps, the so-called forging sequence. The design of efficient forging sequences is a very complex and iterative development process. In order to automate this process and to reduce ...
  • Automated Enrichment of Routing Instructions 
    Wage, Oskar; Feuerhake, Udo; Sester, Monika (Lund : Association of Geographic Information Laboratories in Europe, 2018)
    Commonly used navigation instructions are based on metric turn descriptions (e.g. “turn left onto Nienburger Straße in 100 m”). For the user it is easy to follow the route, but later it is typically hard to remember how ...
  • Automated extraction of plantations from ikonos satellite imagery using a level set based segmentation method 
    Vogt, Karsten; Scheuermann, Björn; Becker, Christian; Büschenfeld, Torsten; Rosenhahn, Bodo; Ostermann, Jörn (Göttingen : Copernicus GmbH, 2010)
    In this article we present a method that extracts plantations from satellite imagery by finding and exploiting appropriate feature space projections. Segmentation is done using an automatic two-region segmentation based ...
  • Automated extraction of the Antarctic coastline using snakes 
    Klinger, T.; Heipke, Christian; Ott, N.; Schenke, H.W.; Ziems, M. (Göttingen : Copernicus GmbH, 2010)
    In this paper we present an automatic approach for coastline detection from images which is based on parametric active contours (snakes). Snakes require the definition of an energy functional that reflects the underlying ...
  • Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures 
    Denkena, Berend; Schmidt, Carsten; Weber, Patricc (Amsterdam [u.a.] : Elsevier, 2016)
    In the research project “High-performance Production of CFRP Structures” (HP CFK) a new automated fiber placement (AFP) system for laying thermoset CFRP (carbon fiber-reinforced plastic) slit tapes was developed. Its novel, ...
  • Automated fiber placement: The impact of manufacturing constraints on achieving structural property targets for CFRP-stiffeners 
    Denkena, Berend; Horst, Peter; Heimbs, Sebastian; Schmidt, Carsten; Reichert, Lisa; Tiemann, Tim (Amsterdam [u.a.] : Elsevier, 2023)
    The use of automated fiber placement (AFP) to manufacture integrated CFRP stiffening structures leads to a conflict between structural requirements and process limitations in early design stages. In order to avoid costly ...
  • Automated geometry measurement and deep rolling of butt welds 
    Heide, Klaas Maximilian; Heikebrügge, Steffen; Dänekas, Christian; Breidenstein, Bernd; Schaumann, Peter (Heidelberg : Springer, 2022)
    During the joining of two metal sheets by welding, a process-specific geometry of the weld is created. The local geometry of the created weld has a decisive influence on its fatigue strength. This is due to stress concentration ...
  • Automated Laboratory and Field Techniques to Determine Greenhouse Gas Emissions 
    Zaman, M.; Kleineidam, K.; Bakken, L.; Berendt, J.; Bracken, C.; Butterbach-Bahl, K.; Cai, Z.; Chang, S.X.; Clough, T.; Dawar, K.; Ding, W.X.; Dörsch, P.; dos Reis Martins, M.; Eckhardt, C.; Fiedler, S.; Frosch, T.; Goopy, J.; Görres, C.-M.; Gupta, A.; Henjes, S.; Hofmann, M.E.G.; Horn, Marcus A.; Jahangir, M.M.R.; Jansen-Willems, A.; Lenhart, K.; Heng, L.; Lewicka-Szczebak, D.; Lucic, G.; Merbold, L.; Mohn, J.; Molstad, L.; Moser, G.; Murphy, P.; Sanz-Cobena, A.; Šimek, M.; Urquiaga, S.; Well, R.; Wrage-Mönnig, N.; Zaman, S.; Zhang, J.; Müller, C. (Heidelberg [u.a.] : Springer, 2021)
    Methods and techniques are described for automated measurements of greenhouse gases (GHGs) in both the laboratory and the field. Robotic systems are currently available to measure the entire range of gases evolved from ...
  • Automated method for structural segmentation of nasal airways based on cone beam computed tomography 
    Tymkovych, Maksym Yu; Avrunin, Oleg G.; Paliy, Victor G.; Filzow, Maksim; Gryshkov, Oleksandr; Glasmacher, Birgit; Omiotek, Zbigniew; Dzierlak, Roza; Smailova, Saule; Kozbekova, Ainur (Bellingham, Wash. : SPIE, 2017)
    The work is dedicated to the segmentation problem of human nasal airways using Cone Beam Computed Tomography. During research, we propose a specialized approach of structured segmentation of nasal airways. That approach ...
  • Automated methods for ferrocene chemistry 
    Gathy, Robert (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2022)
    Despite numerous technical advances over the last century, the field of academic organic chemistry still relies heavily on manual labor and non-systematic experiment design. Discovery and optimization of chemical reactions ...
  • Automated parametrical antenna modelling for ambient assisted living applications 
    Kazemzadeh, Reza; John, Werner; Mathis, Wolfgang (Göttingen : Copernicus GmbH, 2012)
    In this paper a parametric modeling technique for a fast polynomial extraction of the physically relevant parameters of inductively coupled RFID/NFC (radio frequency identification/near field communication) antennas is ...
  • Automated process planning in milling of hybrid components 
    Denkena, Berend; Wichmann, Marcel; Heide, Klaas Maximilian; Wiesener, Frederik; Nguyen, Hai Nam (Berlin, Heidelberg : Springer, 2023)
    Hybrid material composites can meet the increasing demands for high strength and low weight due to their different workpiece properties. Usually, hybrid components require post-machining after their fabrication. Due to the ...
  • Automated production data feedback for adaptive work planning and production control 
    Denkena, Berend; Dittrich, Marc-André; Wilmsmeier, Sören (Amsterdam : Elsevier B.V., 2019)
    Higher customer's expectations and new technological developments have resulted in an increased complexity of manufacturing systems. Consequently, work planning and production control have become more crucial than ever to ...
  • Automated Segmentation of Olivine Phenocrysts in a Volcanic Rock Thin Section Using a Fully Convolutional Neural Network 
    Leichter, Artem; Almeev, Renat R.; Wittich, Dennis; Beckmann, Philipp; Rottensteiner, Franz; Holtz, Francois; Sester, Monika (Lausanne : Frontiers Media, 2022)
    An example of automated characterization and interpretation of the textural and compositional characteristics of solids phases in thin sections using machine learning (ML) is presented. In our study, we focus on the ...
  • Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries 
    Behrens, Bernd-Arno; Raatz, Annika; Hübner, Sven; Bonk, Christian; Bohne, Florian; Bruns, Christian; Micke-Camuz, Moritz (Amsterdam : Elsevier, 2017)
    This research describes the development of a fully automated forming process of continuous FRP to assemble a down scaled battery tray for a plug-in-hybrid automobile. The paper presents the results of forming experiments ...
  • Automated tailoring of system software stacks 
    Ziegler, Andreas (Hannover : Institutionelles Repositorium der Leibniz Universität, 2023)
    In many industrial sectors, device manufacturers are moving away from expensive special-purpose hardware units and consolidate their systems on commodity hardware. As part of this change, developers are enabled to run their ...
  • Automatic classification of aerial imagery for urban hydrological applications 
    Paul, A.; Yang, C.; Breitkopf, U.; Liu, Y.; Wang, Z.; Rottensteiner, F.; Wallner, M.; Verworn, A.; Heipke, C. (Göttingen : Copernicus GmbH, 2018)
    In this paper we investigate the potential of automatic supervised classification for urban hydrological applications. In particular, we contribute to runoff simulations using hydrodynamic urban drainage models. In order ...
  • Automatic classification of high resolution satellite imagery - A case study for urban areas in the Kingdom of Saudi Arabia 
    Maas, Alina; Alrajhi, M.; Alobeid, A.; Heipke, Christian (Göttingen : Copernicus GmbH, 2017)
    Updating topographic geospatial databases is often performed based on current remotely sensed images. To automatically extract the object information (labels) from the images, supervised classifiers are being employed. ...
  • Automatic derivation of land-use from topographic data 
    Thiemann, Frank; Sester, Monika; Bobrich, Joachim (Göttingen : Copernicus GmbH, 2010)
    The paper presents an approach for the reclassification and generalization of land-use information from topographic information. Based on a given transformation matrix describing the transition from topographic data to ...
  • Automatic Detection of Volcanic Unrest Using Blind Source Separation with a Minimum Spanning Tree Based Stability Analysis 
    Ghosh, Binayak; Motagh, Mahdi; Haghighi, Mahmud Haghshenas; Vassileva, Magdalena Stefanova; Walter, Thomas R.; Maghsudi, Setareh (New York, NY : IEEE, 2021)
    Repeated synthetic aperture radar (SAR) acquisitions can be utilized to produce measurements of ground deformations and associated geohazards, such as it can be used to detect signs of volcanic unrest. Existing time series ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken