Auflistung Fakultäten nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Automated Laboratory and Field Techniques to Determine Greenhouse Gas Emissions 
    Zaman, M.; Kleineidam, K.; Bakken, L.; Berendt, J.; Bracken, C.; Butterbach-Bahl, K.; Cai, Z.; Chang, S.X.; Clough, T.; Dawar, K.; Ding, W.X.; Dörsch, P.; dos Reis Martins, M.; Eckhardt, C.; Fiedler, S.; Frosch, T.; Goopy, J.; Görres, C.-M.; Gupta, A.; Henjes, S.; Hofmann, M.E.G.; Horn, Marcus A.; Jahangir, M.M.R.; Jansen-Willems, A.; Lenhart, K.; Heng, L.; Lewicka-Szczebak, D.; Lucic, G.; Merbold, L.; Mohn, J.; Molstad, L.; Moser, G.; Murphy, P.; Sanz-Cobena, A.; Šimek, M.; Urquiaga, S.; Well, R.; Wrage-Mönnig, N.; Zaman, S.; Zhang, J.; Müller, C. (Heidelberg [u.a.] : Springer, 2021)
    Methods and techniques are described for automated measurements of greenhouse gases (GHGs) in both the laboratory and the field. Robotic systems are currently available to measure the entire range of gases evolved from ...
  • Automated method for structural segmentation of nasal airways based on cone beam computed tomography 
    Tymkovych, Maksym Yu; Avrunin, Oleg G.; Paliy, Victor G.; Filzow, Maksim; Gryshkov, Oleksandr; Glasmacher, Birgit; Omiotek, Zbigniew; Dzierlak, Roza; Smailova, Saule; Kozbekova, Ainur (Bellingham, Wash. : SPIE, 2017)
    The work is dedicated to the segmentation problem of human nasal airways using Cone Beam Computed Tomography. During research, we propose a specialized approach of structured segmentation of nasal airways. That approach ...
  • Automated methods for ferrocene chemistry 
    Gathy, Robert (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2022)
    Despite numerous technical advances over the last century, the field of academic organic chemistry still relies heavily on manual labor and non-systematic experiment design. Discovery and optimization of chemical reactions ...
  • Automated parametrical antenna modelling for ambient assisted living applications 
    Kazemzadeh, Reza; John, Werner; Mathis, Wolfgang (Göttingen : Copernicus GmbH, 2012)
    In this paper a parametric modeling technique for a fast polynomial extraction of the physically relevant parameters of inductively coupled RFID/NFC (radio frequency identification/near field communication) antennas is ...
  • Automated process planning in milling of hybrid components 
    Denkena, Berend; Wichmann, Marcel; Heide, Klaas Maximilian; Wiesener, Frederik; Nguyen, Hai Nam (Berlin, Heidelberg : Springer, 2023)
    Hybrid material composites can meet the increasing demands for high strength and low weight due to their different workpiece properties. Usually, hybrid components require post-machining after their fabrication. Due to the ...
  • Automated production data feedback for adaptive work planning and production control 
    Denkena, Berend; Dittrich, Marc-André; Wilmsmeier, Sören (Amsterdam : Elsevier B.V., 2019)
    Higher customer's expectations and new technological developments have resulted in an increased complexity of manufacturing systems. Consequently, work planning and production control have become more crucial than ever to ...
  • Automated Segmentation of Olivine Phenocrysts in a Volcanic Rock Thin Section Using a Fully Convolutional Neural Network 
    Leichter, Artem; Almeev, Renat R.; Wittich, Dennis; Beckmann, Philipp; Rottensteiner, Franz; Holtz, Francois; Sester, Monika (Lausanne : Frontiers Media, 2022)
    An example of automated characterization and interpretation of the textural and compositional characteristics of solids phases in thin sections using machine learning (ML) is presented. In our study, we focus on the ...
  • Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries 
    Behrens, Bernd-Arno; Raatz, Annika; Hübner, Sven; Bonk, Christian; Bohne, Florian; Bruns, Christian; Micke-Camuz, Moritz (Amsterdam : Elsevier, 2017)
    This research describes the development of a fully automated forming process of continuous FRP to assemble a down scaled battery tray for a plug-in-hybrid automobile. The paper presents the results of forming experiments ...
  • Automated tailoring of system software stacks 
    Ziegler, Andreas (Hannover : Institutionelles Repositorium der Leibniz Universität, 2023)
    In many industrial sectors, device manufacturers are moving away from expensive special-purpose hardware units and consolidate their systems on commodity hardware. As part of this change, developers are enabled to run their ...
  • Automatic classification of aerial imagery for urban hydrological applications 
    Paul, A.; Yang, C.; Breitkopf, U.; Liu, Y.; Wang, Z.; Rottensteiner, F.; Wallner, M.; Verworn, A.; Heipke, C. (Göttingen : Copernicus GmbH, 2018)
    In this paper we investigate the potential of automatic supervised classification for urban hydrological applications. In particular, we contribute to runoff simulations using hydrodynamic urban drainage models. In order ...
  • Automatic classification of high resolution satellite imagery - A case study for urban areas in the Kingdom of Saudi Arabia 
    Maas, Alina; Alrajhi, M.; Alobeid, A.; Heipke, Christian (Göttingen : Copernicus GmbH, 2017)
    Updating topographic geospatial databases is often performed based on current remotely sensed images. To automatically extract the object information (labels) from the images, supervised classifiers are being employed. ...
  • Automatic derivation of land-use from topographic data 
    Thiemann, Frank; Sester, Monika; Bobrich, Joachim (Göttingen : Copernicus GmbH, 2010)
    The paper presents an approach for the reclassification and generalization of land-use information from topographic information. Based on a given transformation matrix describing the transition from topographic data to ...
  • Automatic Detection of Volcanic Unrest Using Blind Source Separation with a Minimum Spanning Tree Based Stability Analysis 
    Ghosh, Binayak; Motagh, Mahdi; Haghighi, Mahmud Haghshenas; Vassileva, Magdalena Stefanova; Walter, Thomas R.; Maghsudi, Setareh (New York, NY : IEEE, 2021)
    Repeated synthetic aperture radar (SAR) acquisitions can be utilized to produce measurements of ground deformations and associated geohazards, such as it can be used to detect signs of volcanic unrest. Existing time series ...
  • Automatic extraction of control points from 3D Lidar mobile mapping and UAV imagery for aerial triangulation 
    Naimaee, R.; Saadatseresht, M.; Omidalizarandi, M. (Red Hook, NY : Curran, 2023)
    Installing targets and measuring them as ground control points (GCPs) are time consuming and cost inefficient tasks in a UAV photogrammetry project. This research aims to automatically extract GCPs from 3D LiDAR mobile ...
  • Automatic generation of task-specific serial mechanisms using combined structural and dimensional synthesis 
    Ramirez Rodriguez, Daniel Andres (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2018)
    Although the diversity of robot kinematic structures that are used in industry has increased in the recent years, robot manufacturers still offer only a limited number of architectures. As most of the robots, especially ...
  • Automatic measurement of sewer man-holes in large scale aerial images 
    Pollak, Bernd; Jacobsen, Karsten ([Wechselnde Verlagsorte] : ISPRS, 2000)
    The geometric changes of the surface (subsidence and horizontal displacement) caused by coal mining can be determined by photogrammetry with a sufficient accuracy. As long time stable targets sewer manholes can be used. ...
  • Automatic Quality Assessment of Lecture Videos Using Multimodal Features 
    Shi, Jianwei (Hannover : Gottfried Wilhelm Leibniz Universität, 2019-05-23)
    Multimedia Retrieval, eine entwickelte Methodologie, welche aus Information Retrieval stammt, wird in der digitalisierten Gesellschaft weit verbreitet eingesetzt. Bei der Suche nach Videos im Internet, müssen diese nach ...
  • Automatic qualtiy control of cropland and grasland GIS objects using IKONOS satellite imagery 
    Helmholz, Petra; Heipke, Christian; Rottensteiner, Franz (Göttingen : Copernicus GmbH, 2010)
    As a consequence of the wide-spread application of digital geo-data in Geoinformation Systems (GIS), quality control has become increasingly important. A high degree of automation is required in order to make quality control ...
  • Automatic re-contouring of repair-welded tool moulds 
    Denkena, Berend; Dittrich, Marc-Andre; Heide, Klaas Maximilian (Amsterdam [u.a.] : Elsevier, 2019)
    The process of repairing damaged tool moulds is conducted manually in the industry. This results in long process times as well as a high dependence of the repair result on the experience of the worker. After a visual ...
  • Automatic refinement of training data for classification of satellite imagery 
    Büschenfeld, Torsten; Ostermann, Jörn (Göttingen : Copernicus GmbH, 2012)
    In this paper, we present a method for automatic refinement of training data. Many classifiers from machine learning used in applications in the remote sensing domain, rely on previously labelled training data. This labelling ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken