Barroi, A.; Amelia, J.; Hermsdorf, J.; Kaierle, S.; Wesling, V.: Influence of the laser and its scan width in the LDNA surfacing process. In: Physics Procedia 56 (2014), S. 204-210. DOI: https://doi.org/10.1016/j.phpro.2014.08.164
Abstract: | |
The novel laser-assisted double-wire non-transferred arc (LDNA) surfacing process that melts two consumable wires with an arc between them and uses a laser to guide the process has shown very promising results. Investigations show that it is possible to create single seams with a complete bond and low dilution at a deposition rate of 7.5 kg/h. In case of multiple seams, joint defects might be formed between the seams due to unfavourable seam geometry. In this paper, results on the optimization of this geometry with an adapted laser scan width are presented. An average connection angle of 93 degrees has been achieved on the side of the weld, where additional seams are placed. It is expected that with these results multiple seams can be welded without producing joint defects, thus leading to an intact layer. | |
License of this version: | CC BY-NC-ND 3.0 Unported |
Document Type: | Article |
Publishing status: | publishedVersion |
Issue Date: | 2014 |
Appears in Collections: | An-Institute |
pos. | country | downloads | ||
---|---|---|---|---|
total | perc. | |||
1 | Germany | 42 | 56.76% | |
2 | United States | 16 | 21.62% | |
3 | China | 5 | 6.76% | |
4 | Canada | 3 | 4.05% | |
5 | Russian Federation | 1 | 1.35% | |
6 | Korea, Republic of | 1 | 1.35% | |
7 | Ireland | 1 | 1.35% | |
8 | Indonesia | 1 | 1.35% | |
9 | Hong Kong | 1 | 1.35% | |
10 | United Kingdom | 1 | 1.35% | |
other countries | 2 | 2.70% |
Hinweis
Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.