Process-parallel center deviation measurement of a BTA deep-hole drilling tool

Download statistics - Document (COUNTER):

Denkena, B.; Bergmann, B.; Kaiser, S.; Mücke, M.; Bolle, D.: Process-parallel center deviation measurement of a BTA deep-hole drilling tool. In: Procedia Manufacturing 24 (2018), S. 229-234. DOI: https://doi.org/10.1016/j.promfg.2018.06.034

Repository version

To cite the version in the repository, please use this identifier: https://doi.org/10.15488/3813

Selected time period:

year: 
month: 

Sum total of downloads: 106




Thumbnail
Abstract: 
The BTA deep-hole drilling process is used to manufacture holes with a high length-to-diameter ratio of up to 100. A major quality criteria is the difference between the drilled hole axis and the desired, ideal straight hole axis, called center deviation. A novel measuring system is being investigated in order to measure the center deviation simultaneously to the drilling process. The deviation is determined by calculating the bending line of the boring bar using a newly developed algorithm. The measuring system consists of four subsystems: Optical fiber Bragg grating (FBG) sensors, four eddy current sensors, a rotary encoder and a displacement encoder. These subsystems enable a spatial measurement visualization of the bending line and the center deviation at the head of the boring bar. A major challenge is the separation of the bending strain from other undesired strain fractions. This is done by using an arrangement of two FBG sensors and a digital band pass filter. Experimental investigations show sufficiently good agreement between the calculated and the actual center deviation. Furthermore, drilling experiments reveal that the measurement setup can be used for additional process monitoring by using frequency analysis. Therefore, the investigated system is able to visualize and observe the center deviation. The visualization can be used to derive adequate countermeasures in order to ensure a better process control for the machine operator. The objective of the investigation is to increase the process reliability and productivity by preventing scrap parts. Within this paper, the investigated measuring system, the calculation of the center deviation and first experimental results are described.
License of this version: CC BY-NC-ND 4.0 Unported
Document Type: article
Publishing status: publishedVersion
Issue Date: 2018
Appears in Collections:Fakultät für Maschinenbau

distribution of downloads over the selected time period:

downloads by country:

pos. country downloads
total perc.
1 image of flag of Germany Germany 67 63.21%
2 image of flag of United States United States 8 7.55%
3 image of flag of China China 8 7.55%
4 image of flag of No geo information available No geo information available 3 2.83%
5 image of flag of Russian Federation Russian Federation 3 2.83%
6 image of flag of India India 3 2.83%
7 image of flag of Indonesia Indonesia 2 1.89%
8 image of flag of United Kingdom United Kingdom 2 1.89%
9 image of flag of Cyprus Cyprus 2 1.89%
10 image of flag of Brazil Brazil 2 1.89%
    other countries 6 5.66%

Further download figures and rankings:


Hinweis

Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.

Search the repository


Browse