Within the scope of the transregional collaborative research centre TCRC73, the effects of an oscillation superimposed forming process for the production of a demonstrator component are investigated. Previous studies in this field were limited to a consideration of the process-related parameters such as the influence of the plastic work and the friction or the component-related parameters such as the influence of the surface quality and the mold filling. This research concentrates on the consideration of the mechanical vibration resistance of components that were manufactured superimposed oscillated. For this purpose, Wöhler tests are conducted in which the fatigue strength of superimposed oscillation pre-stretched test samples and oscillation-free pre-stretched test samples are investigated. First, Wöhler curves are generated in the tensile threshold range for tensile samples made out of the steels DC04 and DP600. Subsequently, tensile specimens are pre-stretched superimposed oscillated and oscillation-free. These specimens are subjected to a tensile threshold load until they break. The influence of the superimposed oscillation forming on the long-term fatigue of components is derived from the comparison of the bearable load cycles. Investigations of the microstructure of the specimens are conducted in order to draw conclusions about the influence on the long-term strength. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.