Männel, Alexander; Müller, Kevin; Knöchelmann, Elias; Ortmaier, Tobias: Load Profile Cycle Recognition for Industrial DC Microgrids with Energy Storage Systems. In: 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE). Piscataway, NJ : IEEE, 2020, S.904-911. DOI: https://doi.org/10.1109/ISIE45063.2020.9152432
Zusammenfassung: | |
Many consumers in production plants like industrial robots or tool machines perform repetitive movements, which lead to a cyclic load demand. However, these load profiles can usually only be roughly estimated at the planning stage. Hence, a subsequent online adaptation of the energy distribution is useful for cases, such as balancing between the charging and discharging amount of energy storage systems to improve those lifetime and usage. This paper presents a novel method of online adaptation for the load distribution of production processes within industrial direct current (DC) microgrids. The online load profile cycle recognition was used to adapt the energy distribution among the sources and loads in the DC microgrid. These sources can be inverters, rectifiers, energy storage systems or decentralized power supply units, such as photo voltaic systems. The approach consists of three major points, the load profile cycle recognition, the load profile analysis and the online adaptation of the energy distribution. This solution was tested in simulation and in experiment with a test rig, that contains an inverter and an energy storage system. The results show, that the load profile will be recognized latest from the third cycle and that the imbalance between charging and discharging amounts of the energy storage is less than 0.6% for each cycle after adaptation. | |
Lizenzbestimmungen: | Es gilt deutsches Urheberrecht. Das Dokument darf zum eigenen Gebrauch kostenfrei genutzt, aber nicht im Internet bereitgestellt oder an Außenstehende weitergegeben werden. |
Publikationstyp: | ConferenceObject |
Publikationsstatus: | acceptedVersion |
Erstveröffentlichung: | 2020 |
Die Publikation erscheint in Sammlung(en): | Fakultät für Maschinenbau |
Pos. | Land | Downloads | ||
---|---|---|---|---|
Anzahl | Proz. | |||
1 | Germany | 54 | 47,79% | |
2 | United States | 26 | 23,01% | |
3 | China | 5 | 4,42% | |
4 | No geo information available | 4 | 3,54% | |
5 | Russian Federation | 3 | 2,65% | |
6 | Czech Republic | 3 | 2,65% | |
7 | India | 2 | 1,77% | |
8 | Ireland | 2 | 1,77% | |
9 | France | 2 | 1,77% | |
10 | Indonesia | 1 | 0,88% | |
andere | 11 | 9,73% |
Hinweis
Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.