Auflistung nach Schlagwort "Metallization"

Sortiert nach: Sortierung: Ergebnisse:

  • COTS - Harsh condition effects considerations from technology to user level 
    Weide-Zaage, Kirsten; Payá-Vayá, Guillermo (Walnut, CA : ASTES Publishers, 2017)
    Radiation hardened devices are mostly extremely expensive. The continuously downscaling of microelectronic structures and the unavoidable presence of particle radiation on ground and in space leads to unwanted failures in ...
  • Cracks in solar cell metallization leading to module power loss under mechanical loads 
    Kasewieter, Jörg; Haase, Felix; Larrodé, Marta Haro; Köntges, Marc (London : Elsevier Ltd., 2014)
    We investigate the mechanisms leading to electrically insulated cell parts in a photovoltaic module under mechanical load. For this we measure the resistances across a crack in a laminated solar cell during bending that ...
  • How to obtain solderable Al/Ni:V/Ag contacts 
    Lehr, Martin; Heinemeyer, Frank; Eidelloth, Stefan; Brendemühl, Till; Kiefer, Fabian; Münster, Daniel; Lohse, Anja; Berger, Miriam; Braun, Nadja; Brendel, Rolf (Amsterdam : Elsevier, 2013)
    We investigate process sequences for obtaining solderable Al/Ni:V/Ag contacts to PERC-type crystalline Si solar cells by in-line Al evaporation. For a high cell efficiency the evaporated aluminum must be annealed at 350 ...
  • Long-term stable encapsulated solder joints on an Al/Ni:V/Ag metallization for silicon solar cells 
    Jung, Verena; Heinemeyer, Frank; Köntges, Marc (London : Elsevier Ltd., 2011)
    Evaporated Al as metallization for silicon solar cells may be profitable as it requires less Al material than the common screen-printed Al/Ag-paste combinations and forms contacts with a lower contact resistivity. To achieve ...
  • Single Print Metal Stencils for High-efficiency PERC Solar Cells 
    Hannebauer, H.; Falcon, T.; Cunnusamy, J.; Dullweber, Thorsten (London : Elsevier Ltd., 2016)
    Industrial silicon solar cells like Passivated Emitter and Rear Cells (PERC) typically apply a screen-printed (Ag) front contact with a single print process using a mesh screen. It has been shown that using stencils instead ...