Browsing by Subject "Mechanical properties"

Browsing by Subject "Mechanical properties"

Sort by: Order: Results:

  • Pfeifer, Ronny; Müller, Christian W.; Hurschler, Christof; Kaierle, Stefan; Wesling, Volker; Haferkamp, Heinz (Amsterdam : Elsevier B.V., 2013)
    Apart from biological factors, the bone healing process strongly depends on the mechanical properties of the implant applied. The stiffness of the implant influences the micro-motion, one of the most important stimuli of ...
  • Sadek, E.; Fouad, N.A. (London : SAGE Publications Ltd., 2013)
    Extruded polystyrene rigid foams have attracted a great attention as a superior load-bearing thermal insulation material since their implementation in building construction. One of the most common application areas of this ...
  • Waizy, Hazibullah; Weizbauer, Andreas; Modrejewski, Christian; Witte, Frank; Windhagen, Henning; Lucas, Arne; Kieke, Marc D.K.; Denkena, Berend; Behrens, Peter; Meyer-Lindenberg, Andrea; Bach, Friedrich-Wilhelm; Thorey, Fritz (London : BioMed Central Ltd., 2012)
    Background: In recent years magnesium alloys have been intensively investigated as potential resorbable materials with appropriate mechanical and corrosion properties. Particularly in orthopedic research magnesium is ...
  • Fedorov, V.; Uhlig, T.; Wagner, G.; Langohr, A.; Holländer, U. (Bristol : Institute of Physics Publishing, 2019)
    Stainless steel components, such as heat exchangers for energy and air-conditioning technologies are commonly manufactured using nickel-based brazing fillers in continuous furnaces or vacuum furnaces. In the continuous ...
  • Schmidt, Carsten; Weber, Patricc; Hocke, Tristan; Denkena, Berend (Amsterdam : Elsevier B.V., 2018)
    In this paper, the influence of prepreg material quality to the mechanical properties of CFRP parts is presented. During the out life of prepreg slit tape, the processability changes by aging especially when storing the ...
  • Behrens, Bernd-Arno; Hübner, S.; Sunderkötter, C.; Gebel, L.; Gnaß, S.; Berndt, G.; Trimborn, C.; Pfeffer, C. (Bristol : Institute of Physics Publishing, 2018)
    Hot-stamped components are an important part in steel-intensive automobile lightweight design in which the use of the heat-treatable steel 22MnB5 has been established. However, the field of application is limited by the ...
  • Behrens, Bernd-Arno; Nürnberger, F.; Bonk, Christian; Hübner, S.; Behrens, S.; Vogt, H. (Bristol : Institute of Physics Publishing, 2017)
    Aluminum alloys of the 7000 series possess high lightweight potential due to their high specific tensile strength combined with a good ultimate elongation. For this reason, hot-formed boron-manganese-steel parts can be ...
  • Thürer, Susanne Elisabeth; Uhe, Johanna; Golovko, Oleksandr; Bonk, Christian; Bouguecha, Anas; Behrens, Bernd-Arno; Klose, Christian (Pfaffikon : Scientific.Net, 2017)
    Within the scope of the Collaborative Research Centre (CRC) 1153 novel process chains for the production of hybrid solid components by Tailored Forming are developed at the Leibniz Universität Hannover. The combination of ...
  • Timpe, Nico; Fullriede, Hendrik; Borchers, Lothar; Stiesch, Meike; Behrens, Peter; Menzel, Henning (Berlin : De Gruyter, 2014)
    The objective of this study was to test whether nanoporous silica nanoparticles can be employed as fillers in dental composite materials to improve their mechanical properties. These nanoporous silica nanoparticles were ...
  • Khanal, Bishnu Prasad; Grimm, Eckhard; Knoche, Moritz (Oxford : Oxford University Press, 2013)
    Background and aims Russeting in apples (Malus domestica Borkh.) and pears (Pyrus communis L.) is a disorder of the fruit skin that results from microscopic cracks in the cuticle and the subsequent formation of a periderm. ...
  • Stolbchenko, Mykhailo; Grydin, Olexandr; Nürnberger, Florian; Samsonenko, Andrii; Schaper, Mirko (Amsterdam : Elsevier, 2014)
    In the present study experimental results of twin-roll cast aluminium-steel clad strips of a thickness of 2.0 mm using the example of pure aluminium and an austenitic steel are presented. Electron probe measurements of the ...
  • Schöler, S.; Yilkiran, D.; Wulff, D.; Özkaya, F.; Möhwald, K.; Behrens, Bernd-Arno; Maier, H.J. (Les Ulis : EDP Sciences, 2018)
    For the realization of liquid lubricant free forming processes different approaches are conceivable. The priority program 1676 "Dry forming - Sustainable production through dry machining in metal forming" addresses this ...
  • Abrão, A.M.; Denkena, Berend; Köhler, Jens; Breidenstein, Bernd; Mörke, Tobias (Amsterdam : Elsevier, 2014)
    The aim of this work is to study the influence of selected deep rolling parameters (rolling pressure and number of passes) on the surface integrity of fully annealed AISI 1060 high carbon steel. In addition to the mechanical ...
  • Nobouassia Bewa, Christelle; Tchakouté, Hervé K.; Fotio, Daniel; Rüscher, Claus H.; Kamseu, Elie; Leonelli, Cristina (Abingdon : Taylor and Francis Ltd., 2018)
    The main target of this work was to investigate the thermal behavior and water resistance of geopolymer cement made from metakaolin as an aluminosilicate source using phosphoric acid solution (10 M) as a hardener. The ...