Browsing by Subject "Konferenzschrift"

Sort by: Order: Results:

  • Global Cabin Air Quality Executive (GCAQE) (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019-09-17)
    The International Aircraft Cabin Air Conferences are developing into a series of conferences organized every two years. The conferences are mapping the business, regulatory and technical solutions to aircraft cabin air ...
  • Global Cabin Air Quality Executive (GCAQE) (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2021-03-15)
    The International Aircraft Cabin Air Conferences have developed into a series of conferences that were organized so far in 2017, 2019 and 2021. The conferences are mapping the business, regulatory and technical solutions ...
  • Krusche, Stephan; Kuhrmann, Marco; Schneider, Kurt (Bonn : Gesellschaft für Informatik e.V. (GI), 2019)
    This workshop aims at presenting and discussing innovative teaching approaches in software engineering education, which are highly relevant for teaching at universities, colleges, and in online courses. The workshop focuses ...
  • Doan, Triet; Wiese, Lena; Bingert, Sven; Yahyapour, Ramin (Aachen, Germany : RWTH Aachen, 2019)
    The Handle Software manages references to resources of information. However, it does not support a search functionality. A prior implementation with Elasticsearch could not efficiently capture the complex structure of our ...
  • Shivakumaraswamy, Ranjith; Beyer, Christian; Unnikrishnan, Vishnu; Ntoutsi, Eirini; Spiliopoulou, Myra (Aachen, Germany : RWTH Aachen, 2019)
    Active stream learning is frequently used to acquire labels for instances and less frequently to determine which features should be considered as the stream evolves. We introduce a framework for active feature selection, ...
  • Neuhäuser, Thomas; Lenz, Lisa; Weist, Kai; Hohmann, Andrea; Daub, Rüdiger (Hannover : publish-Ing., 2022)
    Current developments and trends are causing an increasingly turbulent environment for manufacturing companies. In order to respond to these dynamic market conditions, products and thus also production systems have to be ...
  • Schuh, Günther; Lukas, Gerret; Hohenstein, Steffen; Krömer, Viktoria; Lindholm, Niklas (Hannover : publish-Ing., 2022)
    Additive Manufacturing (AM) technologies become increasingly relevant for manufacturing companies. Despite having the highest share of AM applications, end-use parts are mostly used for spare or special parts and rarely ...
  • Gembarski, Paul Christoph (Amsterdam [u.a.] : Elsevier, 2020)
    In mechanical engineering, designers have to review a designed artefact iteratively with different domain experts, e.g. from manufacturing, to avoid later changes and find a robust, optimized design. To support the designer, ...
  • Schukat, Esben; Rachner, Jonas; Maidl, Adrian; Göppert, Amon; Adlon, Tobias; Burggräf, Peter; Schmitt, Robert H. (Hannover : publish-Ing., 2022)
    The introduction of new variants and the difficulty of forecasting future market demand and developments aggravate the synchronisation of assembly lines. This ultimately leads to cycle time spreads and thus to efficiency ...
  • Dillinger, Fabian; Kophal, Alexander; Reinhart, Gunther (Hannover : publish-Ing., 2022)
    Today's manufacturing companies operate in a turbulent production environment characterized by globali-zation, mass personalization, and customer-specific product requirements. In this context, Lean Produc-tion and Industry ...
  • Linnartz, Maria; Motz, Ursula; Schröer, Tobias; Stich, Volker (Hannover : publish-Ing., 2022)
    The environment in which companies operate is increasingly volatile and complex. This results in an increased exposure to disruptions. Past disruptions have especially affected procurement. Thus, companies need to prepare ...
  • Plappert, Stefan; Becker, Christian; Gembarski, Paul Christoph; Lachmayer, Roland (Novi Sad : University of Novi Sad - Faculty of Technical Sciences, 2022)
    During product development, changes to parts that are already built into assemblies usually lead to the need to check the function and consistency of the assembly. This procedure is very time-consuming and has to be performed ...
  • Green, Thorben; Rokoss, Alexander; Kramer, Kathrin; Schmidt, Matthias (Hannover : publish-Ing., 2022)
    The transport spot rate in trucking logistics is an important factor for market participants in the recycling industry. Knowledge about the current spot rate is essential for operational decision-making in price negotiations ...
  • Oberle, Michael; Gärtner, Sascha; Yesilyurt, Ozan; Maier, Florian; Brandt, David (Hannover : publish-Ing., 2022)
    Microservices are a special type of service-oriented architecture that promises flexibility through the encapsulation of functionality and lose coupling. With a growing need for responsiveness of manufacturing systems ...
  • Neunzig, Christian; Fahle, Simon; Schulz, Jürgen; Möller, Matthias; Kuhlenkötter, Bernd (Hannover : publish-Ing., 2022)
    Advancing digitalization and high computing power are drivers for the progressive use of machine learning (ML) methods on manufacturing data. Using ML for predictive quality control of product characteristics contributes ...
  • Burisch, Arne; Degen, Reinhard; Hesselbach, Jürgen; Raatz, Annika (Berlin [u.a.] : VDE-Verlag, 2007)
    In recent years, the development of micro systems has been widely discussed in research articles concerning a decrease in size, an increase of complexity and the variety of materials used. In contrast, manufacturing and ...
  • Blank, Andreas; Baier, Lukas; Zwingel, Maximilian; Franke, Jörg (Hannover : publish-Ing., 2022)
    Beyond conventional automated tasks, autonomous robot capabilities aside to human cognitive skills are gaining importance. This comprises goods commissioning and material supply in intralogistics as well as material feeding ...
  • Schöttler, Kerstin; Rathmann, Sven; Raatz, Annika; Hesselbach, Jürgen (Bedford : Euspen (European Society for Precision Engineering and Nanotechnology), 2007)
    The paper describes the design of a system for the automated assembly of hybrid microsystems and the accuracies of the components. The influences on the accuracy will be analyzed on the basis of an example for an automated ...
  • Hemken, Gregor; Böhm, Stefan; Dilger, Klaus; Raatz, Annika; Rathmann, Sven (Berlin [u.a.] : VDE-Verlag, 2008)
    Die hier vorgestellten Arbeiten des Teilprojekts B8 aus dem SFB 516 „Konstruktion und Fertigung aktiver Mikrosysteme“ befassen sich mit der Montage aktiver Mikrosysteme. Dabei werden sensorgeführte Montageprozes se sowie ...
  • Nagi, Ayman; Kersten, Wolfgang (Hannover : publish-Ing., 2022)
    Crises including the COVID-19 pandemic have caused disruptive changes to many industries and supply chains around the world. Their severe impacts on business and the economy provide an opportunity to increase preparedness ...