Startseite
→
Auflistung nach Schlagwort

Auflistung nach Schlagwort "Induction heating"

Anzeige der Dokumente 1-15 von 15

Adaptable orthopedic shape memory implants

Pfeifer, Ronny; Müller, Christian W.; Hurschler, Christof; Kaierle, Stefan; Wesling, Volker; Haferkamp, Heinz (Amsterdam : Elsevier B.V., 2013)

Apart from biological factors, the bone healing process strongly depends on the mechanical properties of the implant applied. The stiffness of the implant influences the micro-motion, one of the most important stimuli of ...
Challenges in the Forging of Steel-Aluminum Bearing Bushings

Behrens, Bernd-Arno; Uhe, Johanna; Petersen, Tom; Klose, Christian; Thürer, Susanne E.; Diefenbach, Julian; Chugreeva, Anna (Basel : MDPI, 2021)

The current study introduces a method for manufacturing steel–aluminum bearing bush-ings by compound forging. To study the process, cylindrical bimetal workpieces consisting of steel AISI 4820 (1.7147, 20MnCr5) in the ...
Design improvements for increasing lifetime of single-shot coils applied at rotating workpieces

Schubotz, S.; Nacke, B. (Bristol : Institute of Physics Publishing, 2018)

In the industry, induction hardening of rotationally symmetrical workpieces by a single-shot process is a widespread method. Due to only partial superimposition of the workpiece areas to be heated by the coil, high power ...
Design of an one-sided transverse flux induction coil by using a numerical optimization algorithm

Schulze, M.; Nikanorov, A.; Nacke, B. (Bristol : Institute of Physics Publishing, 2018)

The transverse flux heating (TFH) concept offers very high electrical efficiency in combination with unique technological flexibility. Numerous advantages make this method beyond competition to be applied in e.g. continuous ...
Einfluss stark nichtlinearer Materialeigenschaften auf die induktive Längsfelderwärmung

Jestremski, Marcel (Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2014)

[no abstract]
Enhancement of the interface of friction welded steel-aluminium joints

Behrens, Bernd-Arno; Duran, Deniz; Matthias, Tim; Ross, Ingo (Berlin : Springer, 2020)

Lightweight multi-material components are of great importance for the transport industry. Not only the component’s weight can be decreased, but also its local properties can be adapted to different loading profiles. Tailored ...
Modelling of an induction heating process and resulting material distribution of a hybrid semi-finished product after impact extrusion

Behrens, Bernd-Arno; Wester, Hendrik; Schäfer, Stefan; Büdenbender, Christoph (Liège : ULiège Library, 2021)

Multi-material solutions offer benefits, as they, in contrary to conventional monolithic parts, are customised hybrid components with properties that optimally fit the application locally. Adapted components offer the ...
Numerical investigation of effects on blanks for press hardening process during longitudinal flux heating

Dietrich, André; Nacke, Bernard (Bristol : Institute of Physics Publishing, 2018)

With the induction heating technology, it is possible to heat up blanks for the press hardening process in 20 s or less. Furthermore, the dimension of an induction system is small and easy to control in comparison to ...
Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

Behrens, Bernd-Arno; Maier, Hans Jürgen; Poll, Gerhard; Wriggers, Peter; Aldakheel, Fadi; Klose, Christian; Nürnberger, Florian; Pape, Florian; Böhm, Christoph; Chugreeva, Anna; Coors, Tim; Duran, Deniz; Thürer, Susanne E.; Herbst, Sebastian; Hwang, Jae-Il; Matthias, Tim; Heimes, Norman; Uhe, Johanna (Heidelberg : Springer, 2020)

This contribution deals with the numerical investigations to develop a novel process chain for hybrid solid components using Tailored Forming. For manufacturing a hybrid bearing bushing, co-extrusion is the first step to ...
Numerical simulation and investigation of induction through-heaters in dynamic operation mode

Blinov, Kirill; Nikanorov, Alexander; Nacke, Bernard; Klöpzig, Markus (Bingley : Emerald Group Publishing Ltd., 2011)

Purpose - Because of their widespread use in industry, induction through-heaters of various metal products must be of high effectiveness not only in "quasi" steady-state operation but in different transient modes as well. ...
Phase transformations in a boron-alloyed steel at high heating rates

Hordych, Illia; Bild, Konrad; Boiarkin, Viacheslav; Rodman, Dmytro; Nürnberger, Florian (Amsterdam : Elsevier B.V., 2018)

Products or semi-finished products featuring tailored properties are highly relevant for many industrial applications. Hence, new technologies that allow to locally adapt mechanical properties are of key interest. For ...
Potentials of single stage induction heating for press hardening of steel blanks

Nacke, B.; Dietrich, A. (Bristol : Institute of Physics Publishing, 2018)

Due to growing challenges regarding crash-performance, CO2 emission as well as increasing demand for lightweight construction, hot metal forming of car body parts has risen to one of the most important technologies for ...
Recent scientific research on electrothermal metallurgical processes

Baake, Egbert; Shpenst, Vadim A. (Saint-Petersburg : Saint-Petersburg Mining University, 2019)

A wide range of industrial metallurgical heating and melting processes are carried out using electrothermal technologies. The application of electrothermal processes offers many advantages from technological, ecological ...
Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored properties

Coors, Timm; Pape, Florian; Kruse, Jens; Blohm, Thoms; Beermann, Rüdiger; Quentin, Lorenz; Herbst, Sebastian; Langner, Jan; Stonis, Malte; Kästner, Markus; Reithmeier, Eduard; Nürnberger, Florian; Poll, Gerhard (London : Springer, 2020)

To manufacture semi-finished hybrid workpieces with tailored properties, a finite element simulation assisted process chain design was investigated. This includes the process steps of cross wedge rolling, hot geometry ...
Solving 1D non-linear magneto quasi-static Maxwell's equations using neural networks

Baldan, Marco; Baldan, Giacomo; Nacke, Bernard (Stevenage [u.a] : IET, 2021)

Electromagnetics (EM) can be described, together with the constitutive laws, by four PDEs, called Maxwell's equations. “Quasi-static” approximations emerge from neglecting particular couplings of electric and magnetic field ...

Anzeige der Dokumente 1-15 von 15

Jetzt Dokument im Repositorium hochladen

Durchblättern

Gesamter Bestand

Mein Nutzer/innenkonto

Nutzungsstatistiken

des Repositoriums

Auflistung nach Schlagwort "Induction heating"

Auflistung nach Schlagwort "Induction heating"

Durchblättern

Gesamter Bestand

Mein Nutzer/innenkonto

Nutzungsstatistiken