Milling of ferrous metals is usually performed by applying cemented carbide tools due to their high hardness, temperature and wear resistance. Recently, ceramic tool materials have been on the rise and enhanced the efficiency ...

Re-contouring in the repair process of aircraft engine blades and vanes is a crucial task. Highest demands are made on the geometrical accuracy as well as on the machined surface of the part. Complexity rises even more due ...

Against the background of the increasing cost and scarcity of raw materials that are required for the manufacture of cutting tools, the question of alternative cutting materials arises. Glasses and glass ceramics represent ...

In this paper, the contribution of tool wear to the energy balance was determined for precision hard turning using chamfered CBN cutting tools. The tool nose wear VBC and the corresponding changes of component forces Fc, ...

Using conventional grinding wheels, self-excited vibrations are one of the most limiting factors in terms of productivity and process stability in cylindrical plunge grinding. Depending on the dynamic behavior of the ...

Modern cutting tools like end mills, drilling tools, and reamers underlie high requirements regarding geometrical accuracy, cutting edge quality, and production costs. However, the potential for process optimization is ...

Thin-walled components, i.e. fuselage frames of airplanes, are prone to an unstable process behavior during milling. Therefore, tools with a chamfer between the cutting edge and the flank face are often used for such ...

Metal-bonded grinding tools are commonly based on copper as bond material and possess low porosity. The powder metallurgic fabrication and the applied process parameters have a high influence on the mechanical properties ...

In analysis of machining processes, finite element analysis is widely used to predict forces, stress distributions, temperatures and chip formation. However, constitutive models are not always available and simulation of ...

The grinding process is still an important manufacturing process for the machining of automotive components. For power train components, ultra-high carbon steel (UHC-steel) is a promising new innovative alloy because of ...