Auflistung nach Schlagwort "Automation"

Sortiert nach: Sortierung: Ergebnisse:

  • Alrajhi, M.N.; Jacobsen, Karsten; Heipke, Christian (Hannover : International Society for Photogrammetry and Remote Sensing, 2013)
    The General Directorate of Surveying and Mapping (GDSM), under the Ministry of Municipal and Rural Affairs (MOMRA) is responsible for the production and dissemination of accurate geospatial data for all the metropolitan ...
  • Vogt, Karsten; Scheuermann, Björn; Becker, Christian; Büschenfeld, Torsten; Rosenhahn, Bodo; Ostermann, Jörn (Göttingen : Copernicus GmbH, 2010)
    In this article we present a method that extracts plantations from satellite imagery by finding and exploiting appropriate feature space projections. Segmentation is done using an automatic two-region segmentation based ...
  • Klinger, T.; Heipke, Christian; Ott, N.; Schenke, H.W.; Ziems, M. (London : International Society for Photogrammetry and Remote Sensing, 2010)
    In this paper we present an automatic approach for coastline detection from images which is based on parametric active contours (snakes). Snakes require the definition of an energy functional that reflects the underlying ...
  • Helmholz, Petra; Heipke, Christian; Rottensteiner, Franz (Göttingen : Copernicus GmbH, 2010)
    As a consequence of the wide-spread application of digital geo-data in Geoinformation Systems (GIS), quality control has become increasingly important. A high degree of automation is required in order to make quality control ...
  • Grote, Anne; Rottensteiner, Franz (Göttingen : Copernicus GmbH, 2010)
    In this paper a road network extraction algorithm for suburban areas is presented. The algorithm uses colour infrared (CIR) images and digital surface models (DSM). The CIR data allow a good separation between vegetation ...
  • Heyn, J.; Blumenthal, P.; Hemken, G.; Fiedler, S.; Walz, C.; Raatz, Annika; Dröder, Klaus (Amsterdam : Elsevier, 2014)
    Reactive multilayer systems (RMS) represent an innovative heat source for the establishment of solder joints. They offer fast bonding processes that introduce very little thermal input and internal stress on the bonded ...
  • Altmann, Bettina; Pape, Christian; Reithmeier, Eduard (Bellingham, WA : S P I E - International Society for Optical Engineering, 2017)
    Unstable movement in roller bearings like cage or roller slip can lead to damages or eventually even to an early break of the bearing. To prevent slip, inadequate operating states should be avoided. Therefore, it is necessary ...
  • Löchte, Christian; Kunz, Holger; Schnurr, Raphael; Langhorst, Sören; Dietrich, Franz; Raatz, Annika; Dilger, Klaus; Dröder, Klaus (Amsterdam : Elsevier, 2014)
    The assembly of limp, elastic or differently shaped objects poses a huge challenge which needs to be met by machine tools and the corresponding processes of handling, forming and joining. These processes are often carried ...
  • Hachicha, B.; Overmeyer, Ludger (Bellingham, WA : S P I E - International Society for Optical Engineering, 2016)
    Polymer optical waveguides, especially single-mode waveguides are increasingly used for short distance communication, as well as for sensing applications. The realization of a working communication route requires different ...
  • Gadiraju, Ujwal; Demartini, Gianluca; Kawase, Ricardo; Dietze, Stefan (Piscataway, NJ : Institute of Electrical and Electronics Engineers Inc., 2015)
    In the 21st century, where automated systems and artificial intelligence are replacing arduous manual labor by supporting data-intensive tasks, many problems still require human intelligence. Over the last decade, by tapping ...
  • Wu, C.S.; Hu, Q.X.; Sun, J.S.; Polte, T.; Rehfeldt, D. (London : SAGE Publications Ltd., 2004)
    MOE Key Lab of Liquid Structure and Heredity of Materials, Institute of Materials Joining, Shangdong University, 73 Jingshi Road, Jinan 250061, People's Republic of China This paper introduces an intelligent system for ...
  • Brüning, J.; Denkena, Berend; Dittrich, Marc-André; Hocke, T. (Amsterdam : Elsevier, 2017)
    Automated Fiber Placement (AFP) processes are commonly deployed in manufacturing of lightweight structures made of carbon fibre reinforced polymer. In general, AFP is connected to individual manufacturing knowledge during ...
  • Helmholz, Petra; Büschenfeld, Torsten; Breitkopf, Uwe; Müller, Sören; Rottensteiner, Franz (Göttingen : Copernicus GmbH, 2012)
    As a consequence of the wide-spread application of digital geo-data in geographic information systems (GIS), quality control has become increasingly important to enhance the usefulness of the data. For economic reasons a ...
  • Kunz, Holger; Löchte, Christian; Dietrich, Franz; Raatz, Annika; Fischer, Fabian; Dröder, Klaus; Dilger, Klaus (Berlin : De Gruyter, 2015)
    The production rates of carbon fiber reinforced plastic (CFRP) parts are rising constantly which in turn drives research to bring a higher level of automation to the manufacturing processes of CFRP. Resin transfer molding ...
  • Wolff, Julius; Yan, Miping; Schultz, Melf; Raatz, Annika (Amsterdam : Elsevier B.V., 2016)
    The disassembly of components with solidified assembly connections is often difficult to plan. A typical example can be found in the aviation industry, where turbine blades solidify in the turbine disc due to operational ...
  • Becker, Christian; Breitkopf, Uwe; Büschenfeld, Torsten; Busch, A.; Grünreich, D.; Heipke, Christian; Helmholz, Petra; Müller, S.; Ostermann, Jörn; Pahl, M.; Vogt, Karsten; Ziems, M. (London : International Society for Photogrammetry and Remote Sensing, 2010)
    The usefulness and acceptance of spatial information systems are mainly dependent on the quality of the underlying geodata. This paper describes a system for semiautomatic quality control of existing geospatial data via ...