Auflistung nach Schlagwörtern (GND)

Sortiert nach: Sortierung: Ergebnisse:

  • Active Reduction of Magnetic Fields in Vehicles 
    Einat, Oded; Shulman, Shaul; Reinhardt, Uwe; Hamann, David; Kunstmann, Jürgen (Aachen : Apprimus, 2024)
    This paper presents an innovative solution for the challenging problem of suppressing low frequent magnetic fields generated by electrical driven powertrains. The solution is based on active field reduction by generating ...
  • Active shape model precision analysis of vehicle detection in 3D lidar point clouds 
    Busch, S. (Göttingen : Copernicus GmbH, 2019)
    LiDAR systems are frequently used for driver assistance systems. The minimal distance to other objects and the exact pose of a vehicle is important for ego movement prediction. Therefore, in this work, we extract the poses ...
  • Active tailstock for precise alignment of precision forged crankshafts during grinding 
    Denkena, Berend; Gümmer, Olaf (Amsterdam : Elsevier, 2013)
    Within the Collaborative Research Centre 489 at the Leibniz Universitaet Hannover a new and innovative process chain for the manufacture of crankshafts is being investigated. By burr-free and near-net-shaped precision ...
  • Activity-based shop floor management – A concept to enhance flexibility 
    Tropschuh, Barbara; Korder, Svenja; Dillinger, Fabian; Bauer, Harald; Reinhardt, Gunter (Hannover : publish-Ing., 2020)
    Volatile markets, an increasing shortage of skilled workers and individual customer requirements as well as the growing desire for a fulfilling work-life balance among employees are influencing the production environment. ...
  • Actuation and stiffening in fluid-driven soft robots using low-melting-point material 
    Peters, Jan; Nolan, Erin; Wiese, Mats; Miodownik, Mark; Spurgeon, Sarah; Arezzo, Alberto; Raatz, Annika; Wurdemann, Helge A. (Piscataway, NJ : IEEE, 2019)
    Soft material robots offer a number of advantages over traditional rigid robots in applications including human-robot interaction, rehabilitation and surgery. These robots can navigate around obstacles, elongate, squeeze ...
  • Adaptable orthopedic shape memory implants 
    Pfeifer, Ronny; Müller, Christian W.; Hurschler, Christof; Kaierle, Stefan; Wesling, Volker; Haferkamp, Heinz (Amsterdam : Elsevier B.V., 2013)
    Apart from biological factors, the bone healing process strongly depends on the mechanical properties of the implant applied. The stiffness of the implant influences the micro-motion, one of the most important stimuli of ...
  • Adaptation of Deeplab V3+ for Damage Detection on Port Infrastructure Imagery 
    Scherff, M.; Hake, F.; Alkhatib, H. (Katlenburg-Lindau : Copernicus Publications, 2023)
    Regular inspection and maintenance of infrastructure facilities are crucial to ensure their functionality and safety for users. However, current inspection methods are labor-intensive and can vary depending on the inspector. ...
  • Adaptive cutting force control on a milling machine with hybrid axis configuration 
    Denkena, Berend; Flöter, F. (Amsterdam : Elsevier BV, 2012)
    In the re-contouring process of aircraft engine components, the unknown geometry and inhomogeneous material properties of the workpiece are major challenges. For this reason a new repair process chain is supposed which ...
  • Adaptive FIR-Filter zur breitbandigen aktiven Störunterdrückung in leistungselektronischen Systemen 
    Aigner, Jens; Dörlemann, Tobias; Lemke, Maximilian; Frei, Stephan (Aachen : Apprimus, 2024)
    [no abstract available]
  • Adaptive inspection planning using a digital twin for quality assurance 
    Reuter, Leon; Denkena, Berend; Wichmann, Marcel (Amsterdam [u.a.] : Elsevier, 2024)
    The integration of a digital twin into inspection planning enables a novel procedure that reduces avoidable inspection times and costs. This paper shows a method for component-specific adaption of inspection plans by feeding ...
  • Adaptive Multi-Priority Rule Approach To Control Agile Disassembly Systems In Remanufacturing 
    Wurster, Marco; Bail, Finn; Behrendt, Sebastian; Lanza, Gisela (Hannover : publish-Ing., 2023)
    End-of-Life (EOL) products in remanufacturing are prone to a high degree of uncertainty in terms of product quantity and quality. Therefore, the industrial shift towards a circular economy emphasizes the need for agile and ...
  • Additive manufacturing of glass: CO2-Laser glass deposition printing 
    Von Witzendorff, Philipp; Pohl, Leonhard; Suttmann, Oliver; Heinrich, Peter; Heinrich, Achim; Zander, Jörg; Bragard, Holger; Kaierle, Stefan (Amsterdam : Elsevier B.V., 2018)
    Additive manufacturing is used in several industrial sectors where polymers and metals are established materials. Different academic studies prove that additive manufacturing methods can be applied on glass materials using ...
  • Additive manufacturing of reflective optics: Evaluating finishing methods 
    Leuteritz, Georg; Lachmayer, Roland (Bellingham, WA : SPIE - International Society for Optical Engineering, 2018)
    Individually shaped light distributions become more and more important in lighting technologies and thus the importance of additively manufactured reflectors increases significantly. The vast field of applications ranges ...
  • Additive refurbishment of a vibration-loaded structural component 
    Ganter, Nicola Viktoria; Ehlers, Tobias; Gembarski, Paul Christoph; Lachmayer, Roland (Cambridge : Cambridge University Press, 2021)
    In the event of damage to additively manufactured components whose shape cannot be produced by machining, an additive repair can potentially be not only ecologically but also ecologically more favorable than the production ...
  • Addressing Class Imbalance for Training a Multi-Task Classifier in the Context of Silk Heritage 
    Dorozynski, M. (Katlenburg-Lindau : Copernicus Publications, 2023)
    Collecting knowledge in the form of databases consisting of images and descriptive texts that represent objects from past centuries is a fundamental part of preserving cultural heritage. In this context, images with known ...
  • Addressing Class Imbalance in Multi-Class Image Classification by Means of Auxiliary Feature Space Restrictions 
    Dorozynski, M.; Rottensteiner, F. (Katlenburg-Lindau : Copernicus Publications, 2022)
    Learning from imbalanced class distributions generally leads to a classifier that is not able to distinguish classes with few training examples from the other classes. In the context of cultural heritage, addressing this ...
  • Adjusting Mechanical Properties of Forging Dies Produced by Ausforming 
    Behrens, Bernd-Arno; Brunotte, Kai; Petersen, Tom; Ostermeyer, Corvin; Till, Michael (Liège : ULiège Library, 2021)
    Due to high thermo-mechanical loads, tools used in hot forming operations need a high resistance to different damage phenomena, such as deformation, cracking and abrasion. They are exposed to cyclic thermo-mechanical stress ...
  • Adjustment of the Mechanical Properties of Silicone for Applications in the Middle Ear 
    Heemeier, Tanja; Lüßenhop, Tammo; Behrens, Peter (Berlin: Walter de Gruyter, 2013-09-07)
    In case of loss of the auditory ossicular chain, the application of a middle ear prosthesis is necessary. For this prosthesis, a silicone pad shall be developed to minimize pressure peaks and for the prevention of forcing ...
  • Advanced Characterization Techniques for Turbine Blade Wear and Damage 
    Schlobohm, Jochen; Bruchwald, Oliver; Frąckowiak, Wojciech; Li, Yinan; Kästner, Markus; Pösch, Andreas; Reimche, Wilfried; Maier, Hans Jürgen; Reithmeier, Eduard (Amsterdam [u.a.] : Elsevier, 2017)
    This paper presents four complementary non-destructive measurement techniques for material characterization and damage detection of turbine blades. The techniques are macroscopic fringe projection with inverse fringe ...
  • Advanced high pressure turbine blade repair technologies 
    Alfred, Irene; Nicolaus, Martin; Hermsdorf, Jörg; Kaierle, Stefan; Möhwald, Kai; Maier, Hans Jürgen; Wesling, Volker (Amsterdam : Elsevier B.V., 2018)
    Components in aircraft engines and gas turbines are exposed to extreme conditions in order to increase performance and efficiency of the overall engine, hence there is an increasing need for cost-effective and time-efficient ...