Auflistung Fakultät für Maschinenbau nach Publikationstyp

Auflistung Fakultät für Maschinenbau nach Publikationstyp

Sortiert nach: Sortierung: Ergebnisse:

  • Aerodynamic Analysis with Athena Vortex Lattice (AVL) 
    Budziak, Kinga (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2015)
    This project evaluates the sutability and practicality of the program Athena Vortex Lattice (AVL) by Mark Drela. A short user guide was written to make it easier (especially for stu-dents) to get started with the program ...
  • Aerodynamics of the Maple Seed 
    Desenfans, Philip (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - The paper presents a theoretical framework that describes the aerodynamics of a falling maple (Acer pseudoplatanus) seed. --- Methodology - A semi-empirical method is developed that provides a ratio stating how ...
  • Air Transport versus High-Speed Rail: From Physics to Economics 
    Gregorian, Hayk (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - This bachelor thesis compares high-speed rail (HSR) transport with air transport. The investigation considers physical fundamentals, energy consumption, environmental impact, infrastructure and investment, market ...
  • Aircraft Fuel Consumption – Estimation and Visualization 
    Burzlaff, Marcus (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2017-12-13)
    In order to uncover the best kept secret in today’s commercial aviation, this project deals with the calculation of fuel consumption of aircraft. With only the reference of the aircraft manufacturer’s information, given ...
  • Aircraft Recycling – A Literature Review 
    Maaß, Svenja (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2020)
    Purpose - The report summarizes the state-of-the-art in aircraft end-of-life strategies. A focus is on latest aircraft types with a high percentage of composite materials. --- Methodology - A literature review is the basic ...
  • Analyse der neuen LTH-Methode zur Massenschätzung von Flugzeugbaugruppen 
    Pape, Arlind (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2018)
    In dieser Projektarbeit geht es um die Abschätzung von Massen der Hauptbaugruppen großer ziviler Verkehrsflugzeuge (MTOM > 40 t), sowie um die Abschätzung der Betriebsleermasse. Die Projektarbeit analysiert die 2013 im ...
  • Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021 
    Schüppstuhl, Thorsten; Tracht, Kirsten; Raatz, Annika (Cham : Springer Nature, 2022)
    This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and ...
  • Ausgewählte statistische Betrachtungen im Flugzeugentwurf: Superkritische Profile und Fahrwerk 
    Gulla, Duncan (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Kenntnisse über Parametereigenschaften und Charakteristiken von Flugzeugkomponenten sind eine wesentliche Grundlage für Methoden des Flugzeugentwurfs. Daher ist Ziel dieser Arbeit, statistische Merkmale und Kenngrößen einer ...
  • AWTmagazin 
    Maier, Hans Jürgen (Garbsen : TEWISS Verlag, 2021)
    Der Arbeitskreis Wasserstrahltechnologie (AWT) wurde 1991 in Hannover gegründet, um die Anwendung und die Entwicklung der Wasserstrahltechnologie in Industrie und Entwicklung zu fördern. Dieses Ziel wird durch einen ...
  • Basic Comparison of Three Aircraft Concepts: Classic Jet Propulsion, Turbo-Electric Propulsion and Turbo-Hydraulic Propulsion 
    Rodrigo, Clinton (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose - This thesis presents a comparison of aircraft design concepts to identify the superior propulsion system model among turbo-hydraulic, turbo-electric and classic jet propulsion with respect to Direct Operating ...
  • Berechnung der reibungsfreien Strömung in Rotoren von Windkraftanlagen 
    Lindemann, Dieter (Hannover : Institut für Mechanik, Universität Hannover, 1988)
    Zweck - Die Strömung im Windrad soll mit einem Computerprogrammen berechnet werden, das auf der Potentialtheorie beruht. Vorteil ist, daß dabei lediglich die geometrischen Daten des Windrades als Eingabeparameter erforderlich ...
  • Characteristics of the Specific Fuel Consumption for Jet Engines 
    Bensel, Artur (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2018)
    Purpose of this project is a) the evaluation of the thrust specific fuel consumption (TSFC) of jet engines in cruise as a function of flight altitude, speed and thrust and b) the determination of the optimum cruise speed ...
  • Chemo-Mechanical Modeling of Polymeric Hydrogels 
    Hajikhani, Aidin (Garbsen : Institut für Kontinuumsmechanik, 2021)
    Hydrogels consist in a water-swollen and self-supporting polymeric network. They can undergo extremely large deformations, their mechanical properties can be tuned finely, and they permit the diffusion and release of ...
  • Coherent structures and rotational effects on the flow over spinners of horizontal axis wind turbines 
    Lin, Shy-Yea (Hannover : Institut für Turbomaschinen und Fluid-Dynamik, 2016)
    Three-dimensional effects due to rotation which decrease the accuracy of predicting the wind turbine aerodynamic performance, are correlated with coherent structures near the blade roots, specifically with the flow separation. ...
  • Computergestützte Analysetechnik und individuelle Modellbildung zur optomechanischen Untersuchung laserbehandelter Augenlinsen 
    Hahn, Jan (Garbsen : TEWISS Verlag, 2020)
    Von der Alterssichtigkeit ist jeder Mensch ab ca. 45 Jahren betroffen. Bei einer neuartigen Behandlungsmethode (fs-Lentotomie) wird mit dem Laser versucht der altersbedingten Linsenverhärtung entgegenzuwirken. Bislang ...
  • Conditions for Passenger Aircraft Minimum Fuel Consumption, Direct Operating Costs and Environmental Impact 
    Caers, Brecht (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Purpose – Find optimal flight and design parameters for three objectives: minimum fuel consumption, Direct Operating Costs (DOC), and environmental impact of a passenger jet aircraft. --- Approach – Combining multiple ...
  • Definition of an Ecolabel for Aircraft 
    Van Endert, Lynn (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2017)
    In attempting to increase the environmental awareness in the aviation sector and to eliminate the green washing phenomenon, an investigation was done into the development and definition of an ecolabel for aircraft. Based ...
  • Dynamic Cabin Air Contamination Calculation Theory 
    Lakies, Marcel (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    In this report an equation is derived to calculate the dynamic effect of primary and secondary aircraft cabin air contamination. The equation is applied in order to understand implications and hazards. Primary contamination ...
  • Einfluss regenerationsbedingter Varianzen auf die Aeroelastik von Verdichterblisks 
    Keller, Christian (Hannover : Institut für Turbomaschinen und Fluid-Dynamik, 2021)
    In modernen Flugtriebwerken kommen in den vorderen hochbelasteten Verdichterstufen zunehmend integrale Laufschaufelräder (Blisks) zum Einsatz. Deren Schaufeln sind aufgrund geringer mechanischer Dämpfung empfindlich gegenüber ...
  • Enhanced simulation of the milling process for a novel roughing and finishing tool 
    Grabowski, Roman (Garbsen : TEWISS Verlag, 2019)
    For milling of aluminum alloys a roughing cutter is often used in the first step to achieve a high material removal rate. In order to obtain a high surface quality, the final contour is produced using a finishing cutter. ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken